Furnitūros gręžimo galvutė

H&T Bohrabstand 26 mm

Būklė: naudotas, Gamybos metai: 1997, Slėgis: 40 t Gylis nuo stulpo: 300 mm Dsdevuuckjpfx Af Aout Eiga: 630 mm Įrengimo aukštis: 900 mm Stalo matmenys: 620 x 520 mm Anga stalelyje: 150 mm Stalo aukštis virš grindų: 600 mm Stūmoklio paviršius: 150 mm Bendras galios poreikis: apie 15,0 kW Mašinos svoris: apie 4,5 t Užimama vieta: apie 1,0 x 1,9 x 3,0 m Leidžiama rankiniam detalių įdėjimui pagal CE standartą Su alyvos hidrauline pavara, valdymas pagal slėgį/laiką ir eigą, dviem rankomis valdoma Presą galima apžiūrėti veikiančią mūsų sandėlyje.

Būklė: naudotas, Gamybos metai: 2007, Pressure: 100 t Stroke: 500 mm Table dimensions: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Dsdpevprv Rsfx Af Aout Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is an Italian-made SICMI model, which was distributed by Knuth.

Būklė: naujas, Pressure 8.5 kN Stroke 40 mm Throat depth 95 mm Working height from/to 95 - 240 mm Table size 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 27 kg Dimensions (L x W x H) 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke parts need to be processed with constant force. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-of-stroke cushioning on both sides • Double guide rings in the piston for smooth and steady operation • Oil-resistant sealing elements Special features of the PND series Dusdpfx Aofv Awaof Aot • Spindle secured against twisting • Spindle return on the PND 85/S only via one cylinder chamber—resulting in additional air savings • Working height fine adjustment is straightforward, fast, and precise in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and air savings

Būklė: naudotas, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Dsdpfx Afet Hw U Nj Ajut Drilling stroke: 150 mm Total power requirement: kW Machine weight approx.: t Space requirements approx.: m

Būklė: naujas, Gamybos metai: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to a variety of surfaces. It is a dry finishing process in which a fine powder made from resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring even adhesion to the surface and forming a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to provide a clean surface, which is essential for the powder to bond effectively with the substrate and produce a firm, long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spraying Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System Dodpfx Aswf Dpgjf Aeut The powder feed system consists of a hopper or container in which the powder coating material is stored. It usually includes devices such as powder pumps, feed hoses, and powder sieves to deliver the powder from storage to the spray gun. Pretreatment Equipment Pretreatment systems are used to prepare the substrate before powder coating application. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature, allowing the powder to melt, flow, and cure to form a durable surface. The oven typically features a conveyor or racks to transport coated parts through the oven chamber. Exhaust System An extraction system is installed in the facility to remove excess powder, fumes, or volatile compounds generated during the coating process. This helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Table size: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2000 kg Height: 2100 mm Dodpsfcw Apofx Af Ajut Width: 1100 mm Depth: 1500 mm

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Dusdpsb U Hwnofx Af Ajt Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: naudotas, Gamybos metai: 1996, Pressure: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table area: 830 x 610 mm Ram area: 650 x 400 mm Frame gap (towards rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment/features: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection Dujdpfjtycdksx Af Aot - ejector - centralized grease lubrication - cover plate for drop hole - stepless speed control via frequency inverter - The machine will be technically overhauled and inspected in our facility and will receive a new control cabinet with safety control system and touchscreen - current accident prevention inspection (UVV) with brake time measurement

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 860027, Offer 24331 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel paths X / Y: 1300 x 500 mm - Drilling machine manufacturer: MAXION, Model: BT 18 STP - Drilling capacity up to: 18 mm - Thread cutting attachment up to: M 16 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 76 mm Dujdpfeu Aq Amox Af Aot - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - Spindle speeds: 100 – 1800 rpm - Spindle speeds: 200 – 3600 rpm - Motorized stroke of the drilling unit - Motorized table clamping x + y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Electrical connection: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg

Būklė: naudotas, Gamybos metai: 2006, mašinos/transporto priemonės numeris: 185078, Offer 24435 Technical Specifications: - Table surface: 1700 x 550 mm - Manual travel X / Y: 1300 x 500 mm - Drill press manufacturer: MAXION, Model: BT 15 GL - Drilling capacity up to: 18 mm - Thread cutting capacity up to: M10 - Drill spindle taper: MK 2 - Drill spindle stroke with fine depth adjustment: 90 mm - Pneumatic feed unit: PV 12 - Throat depth: 670 mm - 4 spindle speeds: 320, 560, 1000, 1600 rpm - Motorized stroke of the drilling unit - Table clamping X + Y - Minimum quantity lubrication - Pneumatic connection: 6 bar - Power supply: 400 V - Required space approx.: W 1750 x H 1600 x D 1000 mm - Weight approx.: 1200 kg - Various guide bushings Dsdpfxjut Uzas Af Aout