Staklės

GURUTZPE B10000

Sąlyga: geras (naudotas), Gamybos metai: 1994, CNC Spiral-Biegemaschine, Kapazität 50 cm³, min.-max. Wickeldurchmesser 500–3.500 mm. Gjdpfx Absiu Acpodeil

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Giedshq Uigopfx Abdol Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindel: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Gamybos metai: 2021, Sąlyga: beveik kaip naujas (naudotas),

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm » at 3x upper roll diameter Pre-bending: 13.0 mm Gedjd Auacjpfx Abdjil » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm Gisdpoxddvnsfx Abdjl - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, - USADA - CURVADORA DE TUBOS EJES: 3 DIÁMETRO MÁXIMO DEL TUBO: 30 x 2 mm LONGITUD DE TRABAJO: 3.000 mm VELOCIDAD DE POSICIONAMIENTO EJE X: 900 mm/seg VELOCIDAD DE CURVADO EJE Y: 200°/seg Gedpsvhc Uujfx Abdsil VELOCIDAD DE GIRO EJE Z: 360°/seg RADIO MÁXIMO DE CURVADO: 20 A 170 mm UNIDAD DE CONTROL: DNC800

Sąlyga: paruoštas naudoti (naudotas), Sertom brand hydraulic plate rolling machine, length 25,000 mm with feed-in, two lower rollers diameter 300 mm, upper roller diameter 318 mm, maximum thickness 14 mm. Rotation motor: 22 kW, movement motor: 5.5 kW, frame motor: 2.5 kW. Overall dimensions: 600 x 190 x 210 (H) cm. Weight: 15,500 kg. Gsdenr Npyjpfx Abdjil

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, CNC Milling Machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Condition: Used Control unit: Heidenhain TNC 426 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tool holder: ISO 40 Spindle speed: 8,000 rpm Overall dimensions: L 3,200 x W 2,100 x H 2,900 mm Weight: 6,200 kg Gijdpfx Abjhlp Iwjdol Shipping possible throughout Germany and Austria. Surcharge €1,000 Sale excludes warranty.

Sąlyga: naudotas, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Gedpfx Abj Dvlisdoil Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Halter links/rechts * Hydraulischer Hubturm * Hydraulische Vorbiegung

Sąlyga: geras (naudotas), Gamybos metai: 2014, 900 mm Drehdurchmesser, 650 mm max. Bearbeitungsdurchmesser, 992 mm maximale Drehlänge, 1000 U/min Spindeldrehzahl, Spindelbohrung 275 mm, 10-fach Revolver, 45 kW Spindelmotor, FANUC Series 32i Steuerung, 3-Backen Kraftspannfutter, Reitstock, Späneförderer, Kühlmittelanlage, Gjdpfxjwwtrbo Abdeil