Mikrosujungimo linija

Grecon Profijoint

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Medienos jungimo mikrodantukais linija Grecon ProfiJoint Gamybos metai: 2014 Techninė būklė: labai gera Tjdpjxyq Nmjfx Afwef Techniniai duomenys: Galutinio elemento ilgis: 2100 mm Už papildomą mokestį siūlome montavimą, paleidimą bei operatorių apmokymą. Taip pat teikiame nuolatinį aptarnavimą.

Sąlyga: naudotas, Number of spindles: 6 pcs. Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Tsdpjvnv Uzofx Afwef Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Presas: 2 ciklai/min Todpsw Nbacjfx Afwsf Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Tjdpfowya Syex Afwef Manufacturer: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system with 1 x OptiCut 450 and feeding system F 100 featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Tjdpfx Afeu Atmuewsf Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: naudotas, Gamybos metai: 2006, Gamintojas: Weinig Modelis: Unimat Super 4 Pagaminimo metai: 2006 Keturių pusių obliavimo staklės Gamintojas: WEINIG, restauruotos Modelis: UNIMAT SUPER 4 su trumpų ruošinių mechanizacija EM15 - Pagaminimo metai: 2006 Techninės specifikacijos - Darbinis plotis: maks. 150 mm - Darbinis plotis: min. 25 mm - Darbinis aukštis: maks. 50 mm - Darbinis aukštis: min. 15 mm - Velenų skaičius: 3 - Viršutinio veleno galia: 22 kW - Apatinio veleno galia: 11 kW - Velenų apsisukimų skaičius: maks. 7.000 aps./min - Veleno skersmuo: 40 mm - Stalo ilgis: 2.000 mm - Maks. padavimo greitis: 24 m/min - Nuolatinis padavimo greičio reguliavimas - Atskiras variklis kiekvienam velenui Tedpfx Afsqprk Towef - Padavimo volas su kardanine pavara - Padavimas iš žurnalo - Motorizuotas obliavimo aukščio reguliavimas - Automatinė tepimo pompa - WEINIG veidinio frezavimo galvutė - WEINIG EM 15 - Bendra galia: 45 kW

Sąlyga: naudotas, Gamybos metai: 2008, Biokuro katilas Bioflamm SR-EB9 su stūmokliniu grotelių užkūra, pagamintas 2008 m., 2018 m. sumontuotas naujas šilumokaitis, galia 830 kW, karšto vandens sistema maks. temperatūra 120°C, įskaitant padavimo sraigtą su atgalinio užsidegimo apsauga, įskaitant kuro grandininį transporterį, įskaitant 2 stumdomo dugno konteinerius po 30 m³, įskaitant automatinį pelenų šalinimą, įskaitant hidraulinį bloką, įskaitant valdymą, išmontavimą turi atlikti pirkėjas. Tjdpfxovytfuj Afwef

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Pilnai veikiantis UniControl 12, 2006 metų modelis iš Norvegijos. - Norėdami pamatyti tikslias technines specifikacijas, atidarykite toliau prisegtą PDF dokumentą. UniTec 12 skerspjūvis: - pjovimo mazgas - apačioje esantis briaunų apvalinimo freza - Pakėlimo velenas Nr. 1 - Pakėlimo velenas Nr. 2 - Pakėlimo velenas Nr. 3 Ilgas, profilio modulis UniVar 12: - Profilio freza - Profilio freza - Profilio freza horizontali - Profilio freza - Profilio freza - Profilio freza Bendra elektros galia 114 kW, 400 V AC Tedpfx Afsmgc I Nswsf Siurbimo poreikis – 270 m³/min Suspausto oro poreikis – 1000 l/min Staklės buvo naudojamos iki 2023-08-15. Apmokėjimas: prieš pakraunant Pristatymas: iš gamyklos Rendalen, Norvegija Staklės yra Norvegijoje (netoli Trondheimo) Šiuo metu atjungtos, laikomos sausame ir šiltame sandėlyje, paruoštos išsiuntimui. Rekman Maskin & Service – medienos apdirbimo staklių servisas nuo 1986 m.

Sąlyga: naujas, Gamybos metai: 2023, mašinos/transporto priemonės numeris: A2306/9210, The pneumatic drawer and frame press of type Box V3.0 enables easy and fast assembly of drawers and frames. Thanks to its functional design, both individual workpieces and complete boxes with a wide range of joints can be optimally pressed. This ensures a perfect joint and shape of drawers and frames. Due to the special pressing process, folded joints and fronts with glass inserts will not deform. Maximum pressing force: vertical: 800 kg / horizontal: 800 kg Adjustable depth stops to accommodate protruding drawer fronts during pressing Slow approach of the moving pressing unit to the workpiece Operation via joystick Optional features: - Digital positioning display - Kit Door (for pressing furniture corners from the front) Advantages: - High flexibility: Variable, adjustable pressing force and a variety of drawer and frame dimensions - Minimal setup times enable high output - Intuitive operation - High operational safety due to CE safety standards, e.g., two-hand operation - Plug & Play Tedpegqfnzofx Afwef

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 Tjdpfxsrmucxj Afwjf - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)