"Grecon Ultra" pirštų sujungimo linija

Grecon Dimter Ultra

Sąlyga: labai geros būklės (naudotas), veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, Automatic Finger Jointing Line Grecon Dimter Ultra Machine after comprehensive overhaul. Kdodpfsuddvaox Af Isg Specification: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Arbor diameter: Ø50 mm - Usable arbor length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Milling motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feed Table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Infinitely adjustable Dust Extraction: Chipper extraction duct diameter: Ø100 mm Milling head extraction duct diameter: Ø150 mm Dust extraction capacity (flow rate): ~2,400 m³/h Pneumatic System: Operating pressure: 6 bar Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6,000 +15-50 mm - Pressing force: 3 – 7.5 T (3,000 – 7,500 daN) Circular Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Extraction: - Saw extraction duct diameter: Ø100 mm - Extraction capacity (flow): ~400 m³/h Pneumatic System: - Operating pressure: 6 bar - Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Works: 1. Cleaning machine bodies and application of new paint 2. Replacement of bearings with new ones: main spindle of the tenoner; saw unit spindle of the press; linear bearings on the carriage table guide of the tenoner; bearings on the working conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm spacing on the tenoner body, assembly of a glue tank with a safety valve. 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic tubes for actuators, solenoid valves and other pneumatic components 7. Replacement of gears and duplex chain on the press’s chain/belt feeder 8. Overhaul of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators; replacement of worn solenoid valves with new ones 10. Replacement of graphic operator panels on the tenoner control cabinet, on the press control cabinet, and on the small press panel 11. Replacement of buttons, indicator lights, and switches on operator panels and control boxes; replacement of terminal boxes 12. Replacement of controllers overseeing the operation of the tenoner and press with new ones and adaptation of the machine’s control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the push bar of the outfeed table 14. Servicing of electrical installations in control cabinets, modernization and preparation of updated wiring diagram 15. Installation of guards, meshes, and necessary descriptions, labels, safety signs, manufacturer logo, and nameplates 16. Replacement of V-belts with new ones, inspection of pulleys, geared motors, and electric motors 17. Replacement of limit switches, inductive and optical sensors (photo sensors) We specialize in finger jointing machines. Installation, commissioning and operator training within Poland included in price; in other countries, for an additional fee. Service and spare parts support provided.

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 625 mm, Hundegger joinery machine with automation Kjdpfov Ubtcsx Af Iodg 5 axes Working width: 625 mm with tools

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Kedpfx Asw Nbacof Ijdg Presas: 2 ciklai/min Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: naudotas, Weinig Unicontrol 10 (UC 10) angle processing system for the manufacturing of windows, components, and doors. Suitable for frame, series, or individual part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units: 1. Cross-cut saw, NC-axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC-axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC-axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Horizontal profiling unit from above, 3 kW 6. Profiling spindle 2, NC-axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC-axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profiling unit, vertical right, 3 kW 9. Profiling unit, vertical right from above, 3 kW 10. Profiling unit, horizontal from below, NC-axis 3 kW - Double part package - Counter-milling package with counter-milling carriage - Automatic turning system - NEXUS PC control - CNC-controlled stop for length Kodpsv Ag Tdsfx Af Isdg - Studio window setup - Unit for edge rounding from below with cross-cut saw - Glazing bar support rail - Including extraction pipe system - Including Oertli tool set - Further technical data and tool drawings available upon request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Set for producing finger-joint connections for medium and large-scale production. The machine is technically efficient and in good condition. The set includes several tool kits. Characteristics: Kdedpfx Aelu D Tfjf Ieg – Industrial set with one tenoner. Batch feeding under operator supervision enables processing of lower grade raw material as well, – Operation controlled by microprocessors (automatic control), – Batch rotation after each operation on a rotary table (straight finger-joint connection) or tilting the batch rearward (furniture joint on a line; unique GOMA solution), – The set includes an automatic loading station for the press, – Possibility to use mid-cutting on the press, TENONER WITH FEED TABLE Specification Values Milling spindle diameter 50x210 mm Spindle speed 6000 rpm Motor 18.5 kW Tool dimensions 250x160 mm Saw spindle for end trimming Special chipper 300x8 mm Motor 6 kW / 3000 rpm Stepless feed table Working width x height 600 x 30-160 mm Glue nozzle outline according to tool FC-10 PZ6/2 PRESS Specification Values Board width 30-160 mm Board thickness 20-70 mm Finished board length 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic pump 3 kW / 140 bar

Sąlyga: naujas, AGRE ALUP ALLEGRO 14+ 13 270 Variable speed. Space-saving. Cost-effective. Efficient 1:1 direct drive. Simple operation. Low energy consumption. High performance. Suitable for a wide range of applications. Superior compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Kedpfxsixt I Hs Af Isdg Control: Variable speed control with frequency inverter Controller: Graphic controller C55DD Refrigerated dryer: Integrated, refrigerant R513A Filtration: including cyclone separator Tank: horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26–2.26 m³/min Operating pressure min. / max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil quantity: 5.2 l Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1988, Automatic wide belt sander with 2 belts for lacquers, wood, veneer, composite materials and various other materials Machine can be integrated into a production line Technical data: Working width: 1350 mm Maximum usable height: 130 mm Belt size: 2450 x 1350 mm Configuration: 1st unit: Sanding drum diameter 320 mm - grit 60 - cleaning belts for blower - 11 kW motor with variator 2nd unit: Sanding drum diameter 320 mm - grit 40 - cleaning belts for blower - 11 kW motor with variator Scotch Brite unit - 1.5 kW motor Vacuum table Belt speed variator: 4–19 m/min Operating pressure: 7 bar Dimensions (machine): 2000 x 2750 x 2200 mm Vacuum pump: 800 x 700 x 900 mm (h) Kdjdpfxsgmbu Ij Af Ijg

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- Kodpfx Aformucxe Iedg All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Gamybos metai: 2003, Sąlyga: naudotas, Bollegraf kūjinis malūnas AS 75/850 Pagaminimo metai: 2003 Galia: Pritaikymas: Įvado skerspjūvis: Kedpfxeg T Id Nj Af Iodg Rotorius- Rotoriaus plotis: 850 mm Kaina: 24.500 eurų Kontaktinis asmuo: ponas Rainer Eckerle

Sąlyga: naujas, Gamybos metai: 2024, ♻ MONSTER is a hybrid machine consisting of a PRE-SHREDDER P 150 (equipped with two Kdodpfx Aehwwplof Isg reduction gearboxes), combined with the SHREDDER SD 90 XL. The MONSTER shredder stands for effective shredding of various types of pallets, polystyrene, plastics, waste, and electronic equipment. ✔ Motor power: 30 kW + 1x 5.5 kW-9.2 kW (shredder + pre-shredder) ✔ Rotor length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Rotor diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Rotor speed: 80-120 + 5.3-10.3 rpm (shredder + pre-shredder) ✔ Number of cutting blades: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/hour* ✔ Suitable materials: pallets, polystyrene, electronic scrap, plastic, wood, ... ✔ Feed opening: 2072 x 1070 mm ✔ Dimensions (L/W/H): 3.73/1.78/2.67 m ✔ Weight: 4200 kg 2 years warranty or 2,000 operating hours