CNC tekinimo ir frezavimo centras

GRAZIANO CTX 420 linear

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, x eiga 500 mm y eiga 450 mm z eiga 400 mm Valdymas Siemens 840 D Tvirtinimas SK 40 Psdpszawmasfx Ahgepu Veleno apsukos - bepakopės 2 aps./min Pastūmos greitis mm/min Įrankių keitimo įrenginys 16 Prispaudimo paviršius 700 x 500 mm Didžiausias ruošinio svoris 500 kg Staklių svoris apie 4,4 t Staklių matmenys 2,8 x 2,6 x 2,5 m Aušinimo įranga, rankenėlė Pilnas korpusas tik apie 1 500 val.

Būklė: geras (naudotas), Gamybos metai: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle SK 50 Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions Length: 1626 mm Width: 914 mm Width of T-slots: 16.00 mm T-slot center distance: 125 mm Number of standard T-slots: 7 Max. load capacity on table (evenly distributed): 4,536 kg Integrated 4th axis (B axis) Table: 1626 mm x 813 mm Clamping surface diameter: 762 mm Adjustment range: 360° Max. swing diameter of workpiece: 1,270 mm Table load: 4,536.0 kg Max. rated power: 3.7 kW Rotational torque (continuous): 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for machining (B axis): 36°/sec Spindle centerline to table: 146 mm Psdpfsv N Di Ajx Ahgjpu Max. feed rate for machining in X, Y, Z axis: 12.7 m/min Rapid traverse on X: 15.2 m/min Rapid traverse on Y: 15.2 m/min Rapid traverse on Z: 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (full): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General information Coolant tank capacity: 360 L Dimensions Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608.0 kg

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT30 - Spindle drive power: 4.9 [kW] - Spindle speed: 16,000 [rpm] LINEAR AXES - Travel X/Y/Z axes: 700 x 400 x 300 [mm] - Rapid traverse speed (X/Y/Z): 50 / 50 / 56 [m/min] - Feed rate (X/Y/Z): 1 - 30,000 [mm/min] - Distance from table to spindle nose: 330 - 630 [mm] TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 - Tool change time: 0.8 [sec] TABLE - Table size: 800 x 400 [mm] - Max. table load: 250 [kg] ELECTRICAL SUPPLY - Supply voltage: 220 [V] - Total power consumption: 9.5 [kVA] WEIGHT AND DIMENSIONS - Space requirement: 2,050 x 2,220 [mm] - Machine height: 2,497 [mm] - Machine weight: 2,400 [kg] MACHINE HOURS - Hours powered on: 23,456 [h] - Operating hours: 16,703 [h] EQUIPMENT - Control: Brother CNC-C00 - Interface: Ethernet / USB - Electronic handwheel - Option: Extended memory 500 MB - Option: High Accuracy Mode BⅡ - Rotary table type: 4th CNC axis integrated * Manufacturer: YUKIWA * Model: DRC170-EU * 4th axis travel: 360 [degrees] * Minimum 4th axis resolution: 0.001 [degrees] * Clamping diameter: 140 [mm] * Center height: 135 [mm] * With tailstock Ppodjxzu T Sjpfx Ahgou * Coolant tank: 150 [l] * With high-pressure pump: 15 [bar] * With cabin wash - Internal coolant supply (ICS) - Tool measuring probe system - Electrical transformer

Būklė: geras (naudotas), Gamybos metai: 2007, Mašina yra labai geros būklės. PROMOT krovimo ir iškrovimo stotis į pristatymo komplektą neįtraukiama. Prie mašinos yra įvairių įrankių / priedų. Pjdpfxoxf Iams Ahgjpu Techniniai duomenys apie mašiną pateikti paskutinėse dviejose nuotraukose.

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 050 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, sukimosi greitis (maks.): 12 000 aps./min, Heidenhain TNC 430 CNC control 32-position tool changer Coolant system 2x chip conveyors Measuring probe Podpfxou Hf Ryj Ahgopu The total X-axis travel is 2050 mm, which means you can machine 2 meters in one operation without repositioning. A partition wall is also included. When the partition is installed, the X-travel is divided accordingly. Technical data: X-travel: 2050 mm Y-travel: 520 mm Z-travel: 520 mm Spindle taper: SK40 Spindle speed: 12,000 rpm Tool magazine capacity: 2 x 32 positions Spindle drive power: 36 kW Weight approx.: 12,800 kg Technical data, accessories, and machine description are subject to change and not legally binding.

Gamybos metai: 2002, būklė: geras (naudotas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Ppjdpfx Aolz Rvlshgou Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all important details.

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4000 rpm, main spindle/subspindle power: 18.5 kW / 11 kW, tool stations: 10, live tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, total connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4150 mm / 2000 mm / 1800 mm, weight: approx. 4750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. An on-site inspection is possible. Podpfx Ahov Scrhjgjpu

Būklė: geras (naudotas), Gamybos metai: 2001, Manufacturer: KASTO Model: KASTOtec A3 Year of manufacture: 2001 Specifications Metric Saw capacity round 90°: 330 mm Saw capacity flat 90°: 330 x 330 mm Maximum saw speed: 12 - 120 m/min Saw blade dimension: 6830 x 41 x 1.3 mm Power: 7.5 kW Dimensions (approx.): Length: 4600 mm Width: 2150 mm Height: 2310 mm Weight: 4300 kg Ppjdpfx Ahou R R Acogou Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, these details do not constitute representations or contractual terms. We recommend verifying all critical details independently.

Būklė: naudotas, Gamybos metai: 2015, Technical details: Turning diameter: 65 mm Turning length: 120 mm Control: Index C200-4D SL Z-axis main spindle travel: 390 mm Z-axis sub-spindle travel: 390 mm X-axis sub-spindle travel: 600 mm Y1-axis travel: ± 80 mm Y2-axis travel: ± 80 mm X-axis rapid traverse: 45 m/min Y-axis rapid traverse: 15 m/min Z-axis rapid traverse: 45 m/min Spindle 1 speed: 5,000 rpm Spindle 1 power: 35.5/27.5 kW Spindle 1 torque: 170/125 Nm Spindle 2 speed: 5,000 rpm Spindle 2 power: 35.5/27.5 kW Spindle 2 torque: 170/125 Nm C-axis resolution: 0.00014° Bar capacity: 65 mm Spindle nose: AD 140 Spindle bore: 85 mm Milling spindle 1 speed: 18,000 rpm Milling spindle 1 power: 11 kW Milling spindle 1 torque: 19 Nm Milling spindle 2 speed: 18,000 rpm Milling spindle 2 power: 11 kW Milling spindle 2 torque: 19 Nm B-axis swivel angle: 230° B-axis torque: 440 Nm B-axis angular resolution: 0.001° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 magazine for static tools: 6 x VDI 25 Internal coolant supply: Knoll 80 bar / Ecofluid Machine weight approx.: 16.3 t Space requirements approx.: 3.73 x 2.92 x 2.58 m Equipment: Chip conveyor Spindle 1 power chuck SMW HFKN 165-46 mm Spindle 2 power chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck sub-spindle Hainbuch Spanntop Bar loader interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main and sub-spindle Conveyor belt for part removal Oil mist separator Büchel Pjdpfxoyxpads Ahgopu The Index R 200 is a high-precision multifunction turning and milling machine. It is equipped with 2 turning spindles and 2 milling spindles. Full 5-axis capability is installed on both milling spindles. The Z-axes are integrated in the turning spindle stocks. The X2 axis is located in the sub-spindle stock. Milling spindle 1 is equipped with X/Y/B axes in the head. Milling spindle 2 has Y/B axes in the head. Each milling spindle provides a full-value B (swivel) axis with 230° travel. The machine is equipped with a short bar loader IRCO and a parts catcher. The parts to be caught may have the following maximum dimensions: Diameter: 65 mm Length: 120 mm Weight: 5 kg Remnant length: 200 mm All linear axes are fitted with glass scales. Coolant supply is provided via main and sub-spindle, as well as through the sub-spindle. Tool breakage monitoring is available from a drill diameter of 1 mm. All current tool holders are included with the machine. It is in excellent condition!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 635 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 460 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: iTNC 530, veleno greitis (maks.): 10 000 aps./min, veleno nosis: ISO 40, įrankių magazino lizdų skaičius: 30, Įranga: CE žymėjimas, dokumentacija / vadovas, drožlių transporteris, VERTIKALUS APDIRBIMO CENTRAS DMG MODELIS DMC 635V EIGA: 635x510x460 mm ĮRANKIŲ KEITIKLIS RANOM 30 POZICIJŲ VERPTUVO GREITIS 10 000 APS/MIN AUKŠTAS SLĖGIS PER VERPTUVĄ DROŽLIŲ TRANSPORTERIUS NUOTOLINIS RANKENĖLĖ HEIDENHAIN HR410 Ppedpfx Ahsxq E Dasgou