Pjūklas ilgiui pjauti ir įstrižinis pjūklas

Graule ZS 200 N

Sąlyga: naujas, Gamybos metai: 2025, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Hnjdpfx Acei Dfidsueu Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Cutting height at 90°: 200 mm Hodoiuld Sspfx Acusnu Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, nominali galia: 5 kW (6,80 AG), 5 kW, 7.5 HP Cutting height: 200 mm Tiltable up to 60° to the left, up to 30° to the right, adjustable from the front via handwheel Cutting height at 45° tilt: 140 mm Cutting width: 420 mm; cutting width at 45° swivel: 290 mm Swivels up to 60° to the left, up to 45° to the right Incl. saw blade for wood Hnedpodxw U Iofx Acuou 6,000 mm heavy-duty cross-feed roller conveyor, mountable on the left, stop carriage adjustable from the machine using a handwheel, pneumatically lockable, length digitally readable, with digital display in 230V version 4,000 mm heavy-duty feed roller conveyor, mountable on the right Machine tiltable on both sides via handwheel and worm drive from the front Optional extras available upon request, e.g. increased cutting height, material clamping, and laser cutting guide

Sąlyga: naujas, Saw blade diameter 520 x Ø 50 mm Cutting diameter 200 mm Cutting length 420 mm Cutting height at 45° 140 mm Saw blade dimensions 520x3.6/3.0x50 mm Speed 2,800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 310 kg Dimensions (L-W-H) 1400 x 900 x 1650 mm - Cross-cut and mitre circular saws for cross cuts - Double-sided mitre adjustment (60°/45°), with fixed stops - Double-sided bevel cut (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade infinitely height adjustable - Port for optional extraction Features: - 3.0 kW motor for aluminium cutting - Saw blade tiltable via handwheel and worm gear (bevel cut) - Saw blade diameter 520 mm - Saw blade bore 50 mm - Saw blade speed 2,800 rpm Hnodpsxaaxdofx Acuju - 400 Volt / 3 kW (S6/40%) motor with brake and automatic star-delta motor starter - Machine weight approx. 250 kg Cutting data: - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - Carbide-tipped saw blade 520x3.6/3.0x50 mm - Steplessly adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with lever valve - Pneumatic saw blade spray device - Machine tiltable from the front to both sides via hand crank - Machine stand - Powerful drive motor (3.0 kW)

Gamybos metai: 1996, Sąlyga: naudotas, Max. saw blade diameter: 520 mm Hedpfx Aswyur Iocuonu Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30° Pneumatic material clamps Minimal-quantity lubrication system Powerful 5 kW motor

Sąlyga: labai geros būklės (naudotas), Pull Saw GRAULE ZS 200 N -used- - Automatic brake - Feed brake - Machine inclinable to both sides by rear handwheel - Pneumatic spray device - Automatic brake - Feed brake ----- Technical Specifications ----- Cutting height: 200 mm Cutting length: 400 mm Motor: 3 kW Cutting height: 200 mm Cutting length: 400 mm Motor: 3 kW Quality Information: - Guides checked / readjusted - Complete basic inspection - Complete basic cleaning - Electrical system checked Hedpewlgf Djfx Acuonu - Immediately ready for operation

Sąlyga: naujas, Gamybos metai: 2025, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Hnedpfx Acjk H Ic Ueuju Saw tiltable via handwheel and worm gear (back side) Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Sąlyga: naujas, Gamybos metai: 2024, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Hedpoiy Ry Aofx Acusnu Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys: Pjovimo aukštis – 200 mm Pjovimo aukštis, kai pakreipta 45° – 140 mm Pasukama į kairę iki 67° Hjdpfxjn R A Ewo Acuonu Pasukama į dešinę iki 45° 5 kW, 1 hidraulinis padavimo stabdys (pagal pageidavimą) Pjovimo ilgis 90° padėtyje – 420 mm Pjovimo ilgis pakreipus 45° – 295 mm Pakreipiama į kairę 60°, į dešinę 30° Pakreipimo reguliavimas iš priekio rankine svirtimi. 1 vnt. pjūklo diskas medienai, skersmuo 520 mm 1 vnt. sunki atpjovimo ritininė linija, ilgis 6000 mm, montavimas kairėje pusėje. Atrama reguliuojama iš priekio rankiniu ratuku, ilgis tiksliai skaitmeniniu būdu rodomas milimetrais. Atrama pneumatiniu būdu fiksuojama. 1 vnt. skaitmeninis ekranas, 230 V versija 1 vnt. sunki padavimo ritininė linija, montavimas dešinėje, ilgis 4000 mm Staklių ilgis – 11 700 mm Pilnai transportuojama Staklės supakuotos ant tašų Nuotraukose pavaizduota kliento staklė. Pageidaujant galima ir su 215 mm arba 240 mm pjovimo aukščiu.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 520 mm, pjovimo aukštis (maks.): 200 mm, padavimo ilgis X ašis: 420 mm, sukimosi greitis (min.): 2 800 aps./min, pjovimo ilgis (maks.): 420 mm, vietos reikalavimas ilgis: 8 800 mm, reikalingas plotis: 1 200 mm, ilgio ribotuvas: 8 800 mm, slėgis: 5 juosta, galia: 5,5 kW (7,48 AG), ruošinio aukštis (maks.): 200 mm, Įranga: dvipusis, Mobilus pjūklų pagrindas; bendras ilgis apie 8600 mm, skirtas Graule ZS 200 pjūklui; kreipiamoji ritininė linija kairėje pusėje 5200 mm, matavimo ilgis nuo 400 iki 5960 mm, su skaitmeniniu LED matmenų rodmeniu, matavimo ilgis su ištraukiamu antstatu apie 8800 mm. Hnjdpfxov Hhg To Acuou Pjūklų pagrindas su 6 rankinėmis atramomis užtikrina stabilų stovėjimą darbo metu. Su elektriniu maitinimo paskirstymu ir triguba 230 V kištukinių lizdų jungtimi. Mobilus pjūklų pagrindas Beck ESF 1, pjūklas ZS 200 sumontuotas ant pagrindo.