Pjūklas ilgiui pjauti ir įstrižinis pjūklas

Graule ZS 200 N 5 kW (neigbar)

Būklė: naujas, Gamybos metai: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Machine weight: approx. 250 kg Bjdpfx Akei Dfidsuswp Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: geras (naudotas), NHH Lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Digital readout Chuck diameter: 155 mm Bodpfx Akeqgdkisuowp Spindle speed: 2000 rpm Dimensions: 150x85x155 cm (LxWxH)

Būklė: naujas, Diameter 200 mm Bwsdpfjhuxbrox Akuop Height 105 mm Machine weight approx. 25 kg Required space approx. 400 x 280 x 150 mm

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Funkcionalumas: visiškai funkcionalus, Parduodama Alzmetall gręžimo-frezavimo staklė Tipas Plus 3 DG Bwjdpfx Akoxn T S Housp Staklės buvo visiškai išardytos ir atnaujintos. Apžiūra ir bandomasis paleidimas galimi bet kada. Pakrovimui yra šakinis krautuvas.

Būklė: naujas, Diameter 200 mm Bedpfxeupxd Re Akujwp Height 105/265 mm Centre height 105 mm Machine weight approx. 41 kg Space requirement approx. 400 x 330 x 310 mm

Būklė: beveik kaip naujas (parodų įrenginys), 1 3/4 inch - 5 1 3/8 inch - 5 1 1/8 inch - 7 7/8 inch - 9 5/8 inch - 11 1/2 inch - 13 Bodpfx Aodwbk Rekuewp 3/8 inch - 16 5/16 inch - 18 1/4 inch - 20 Individual purchase possible

Būklė: naudotas, with mounted three-jaw chuck Table diameter: 200 mm Bore approx.: 18 mm Construction height: 100 mm Total height with chuck: 165 mm Width: 270 mm Length: 320 mm Bedpsda I Rvefx Akuewp

Būklė: naujas, Gamybos metai: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Bsdpeiy Ry Ajfx Akuewp Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Būklė: visiškai atnaujintas (naudotas), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Bwedpow S Uazjfx Akujp Weight: approx. 7,000 kg Connection: 17 kW - A complete retrofit kit to allow unrestricted manual loading and unloading in accordance with EC conformity, as well as implementation of equipment to CE standards • New control cabinet with certified dual-channel electronic Siemens safety PLC (1512SP F or 1515F) for cycle control, with integrated operator panel for operating modes: setup two-hand, single stroke two-hand, and foot operation (only in combination with BWS); manual lever operation is no longer possible, • Hydraulic safety block for monitoring the closing motion on the main cylinder, • Position-monitored directional valve for up and down movement of the ram in the main cylinder, • Two-hand control unit with dual-channel monitoring of the two-hand synchronisation on the press table (incl. 5m cable), • Replacement of main and control pump motors, • Replacement of seals on the main cylinder, • Fine filter with contamination indicator, • The press is equipped with an electronic position measurement system (including teach-in function and display of current ram position), eliminating the need for a mechanical cam controller. Main operator panel integrated into control cabinet (mounted on right side of machine): - 12" touch panel - Operating buttons and switches for modes and drives - USB interface for data exchange - Light curtain Option: Draw cushion

Būklė: naudotas, Technical details: Drilling capacity in steel (diameter): 30 mm Throat depth: 260 mm Drilling stroke: 160 mm Spindle taper: MT3 Feed rates: 0.1; 0.2; 0.3 mm/rev and manual Spindle speed: max. 1800 rpm, stepless Max. distance spindle/table: 750 mm Bsdpfx Aova Higjkujwp Table clamping surface: L: 280 x W: 355 mm Rotating table: no Tilting clamping table: 360 degrees Drill table adjustment, vertical: 600 mm Column diameter: 130 mm Tapping: No Total power requirement: 1.1 kW Approx. machine weight: 570 kg Approx. machine dimensions (LxWxH): 0.9 x 0.9 x 1.9 m This machine is equipped with a cross table. Drilling table (LxW): 370 x 500 mm Attachment table (LxW): 420 x 750 mm, clamping surface = 320 x 600 mm, cross travel (X-axis) 250 mm possible Ejector with drift key Coolant system Accessories: Machine vice Machine feet