Kryžminio pjovimo pjūklas, pjūklas-mito pjovimo pjūklas ir varčios pjūklas

GRAULE 200 NF,Sonderausfuehrung

Sąlyga: naujas, Gamybos metai: 2025, Firebox output: 510 kW Working output: 407 kW New device, original packaging: Yes Flue outlet diameter: 250 mm Warm air supply ducts: 4 x 350 mm Nkedok Utrwspfx Af Iet Firebox length: 1900 mm Firebox width: 900 mm Firebox height: 900 mm Air delivery: 26,000 m³/h Power consumption: 4,500 W Designed for room volume: 8,000 m³ Area to be heated: 1,800 m² Oven height without warm air ducts: 3,000 mm Oven width: 1,220 mm Oven length without flue gas fan: 2,700 mm Weight: 1,575 kg

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2024/121/47, pjūklo disko skersmuo: 420 mm, GRAULE Crosscut and Mitre Circular Saw Model ZS 170 N (tiltable) 400 Volt three-phase brake motor, 2.2 kW Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine, tiltable on both sides via hand crank from the rear, from 90° to 45° left and approx. 30° to about 60° right Nodpfx Afjtwz Tlo Ijkt 1 pc. HM circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative rake, for wood 1 pc. machine stand

Sąlyga: naujas, Gamybos metai: 2026, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Nodsk H Ic Ujpfx Af Ijkt Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Sąlyga: geras (naudotas), Gamybos metai: 1990, RANDEK SP700 Crosscut Saw Nkodpfjh Ayyqox Af Ist Manufactured by Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series by Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and highly accurate. It has been on the market for a long time and is continually improved based on close cooperation with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all required cuts. The large saw blade diameter (700 mm) enables you to cut multiple pieces from wood stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Timber clamping near the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Discharge roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to change/errors excepted

Sąlyga: naujas, Gamybos metai: 2024, Hacker blades 40 x 40 concave Blades for Weima, Gross ... Suitable for almost all common chippers/shredders Njdpfsbxu Dhjx Af Ijkt Available from stock in Bitburg Subject to prior sale

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Nsdpfx Aou D Amgef Iekt Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Sąlyga: naujas, Gamybos metai: 2025, konteinerio ilgis: 7,2 pėda, spalva: balta, bendras svoris: 600 kg, didžiausias leistinas svoris: 600 kg, tuščias svoris: 600 kg, krovinio erdvės tūris: 6,6 m³, krovinių skyriaus plotis: 1 200 mm, krovimo vietos ilgis: 2 400 mm, krovos erdvės aukštis: 2 500 mm, mašinos/transporto priemonės numeris: Sanitärcontainer WC-WC, Įranga: dušas, vonios kambarys, Sanitary Container | WC Container | Shower Container | Toilet Container | Double WC Container | 120cm x 240cm | Model WC-WC | Double WC Container | High-Quality and Flexible Solution Nodevv Ra Uepfx Af Iekt Available products can be viewed and picked up directly at our warehouse. Our office, residential, and sanitary containers offer an excellent solution for a wide range of applications. They impress with outstanding quality, maximum flexibility, and short delivery times. Technical Details: Dimensions: • Length: 240 cm • Width: 120 cm • Height: 250 cm • Weight: 400 kg Insulation: • Ceiling/Walls: 5 cm PUR (Polyurethane) • Optional: 10 cm insulation with PUR, PIR, or mineral wool available • Floor: 16 mm fiber cement board + RAL 7015 colored, seamless epoxy resin floor coating • PVC flooring Features: • 2 mm thick galvanized steel sheet • RAL 7015 colored, seamless epoxy resin floor coating • 2× Compartments • 2× External doors • 2× WC with washbasin • 2× Ventilation • Frameless, modern mirror • Metal toilet paper holder • Metal soap dispenser Colors: • Facade color: RAL 9002 • Frame color: RAL 7016 • Customization: Individual design according to customer requirements possible High-quality finish for long-term use Stock & Delivery: • Stock items: Same-day shipping • Not in stock: Production time 2 to 4 weeks depending on model • Worldwide shipping: We offer professional shipping to all countries, ensuring fast and reliable delivery. • Custom sizes: Products can be manufactured according to the customer's specific requirements. Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen, Germany For further information or customized solutions, please feel free to contact us!

Gamybos metai: 2025, Sąlyga: naujas, ⭐️ Four Post Car Workshop Lift ⭐️ TM-GROUP 4SF-4000B 4 Tons Automatic FOR WHEEL ALIGNMENT / GEOMETRY HIGH-QUALITY OIL AND INSTALLATION KIT INCLUDED Nedpfew Ta I Tox Af Iekt Specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 4 tons ✅ Type: Automatic ✅ Connection: Base mounted ✅ Power supply: 400V (optional 230V) ✅ Lifting time: 60 seconds ✅ Lifting height: 1750 mm ✅ Limit switch: Yes ✅ Motor power: 2.2 kW ✅ Telescopic rolling jack arms allow lifting vehicles at the sills ✅ Turnplate recesses (with locking option) ✅ Spaces for turntables ✅ Self-lowering ramps ✅ Automatic safety locks forming wheel stops ✅ Anchors included: Yes ✅ Hydraulic oil 10L: included free ✅ Complies with UDT certification requirements: Yes ✅ Ramp length: 4250 mm ✅ Ramp width: 918–1118 mm Is this lift suitable for me?❓ The automatic four-post lift is suitable for servicing virtually any passenger vehicle, from 2-door coupes to large 4x4 off-road vehicles. The 4000 kg (4T) load capacity also allows lifting of smaller delivery vans. The lift ensures full service and repair capabilities for larger and heavier vehicles. What about the scope of repairs?❓ Our lift is perfect for wheel alignment and geometry work, suspension repair, as well as engine or gearbox maintenance. The high lifting (175 cm to wheel base—practical lifting higher by half the wheel diameter) enables comprehensive inspection. Documentation: The lift is delivered with all necessary documentation: ✅ Declaration of conformity with CE certificate ✅ Operating manual in English ✅ Automatic rolling jack FREE❗

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger-jointing press, foldable - Drying paternoster approx. 7 m, for board lengths up to 6 m - Cut-off and zero saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine not for sale Nedpfswclkysx Af Iokt - Package cross conveyor The machine is in very good condition, with very few operating hours. Machine is still assembled, but available immediately.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10006565, Weinig Powermat 1500 Nkederq Ebfjpfx Af Iet Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Top spindles: 2 Spindle arrangement: b-r-l-t-t-b Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Chamfering unit included Separate motor for each spindle Electronic feed with brake, infinitely variable 5-40 m/min Durofer spike-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS SYSTEM CE mark Declaration of conformity