Diskinis pjūklas

GOMAD PS400

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Panel saws Longitudinal and Crosscut Saw for PS 400 Longitudinal and Crosscut Saw for PS 400 Used 1999 Make: Longitudinal and Crosscut Saw for PS 400 Model: Longitudinal and Crosscut Saw for PS 400 Description: Longitudinal and Crosscut Saw for PS 400 Manufacturer: GOMAD Machine model/type: PS 400 Year of manufacture: 1999 Machine category: Longitudinal and Crosscut Saw Main blade adjustable up/down and tiltable Blade-to-blade operation Equipped with side sliding carriage Cutting length on carriage: 1500 mm Cutting width at fence: 1000 mm Main motor: 6 kW Table dimensions: 1020 x 1120 mm With table extension With extension With scoring unit Dsdpsgap Szjfx Affski Max scoring blade diameter: 120 mm Scoring spindle diameter: 22 mm Scoring motor: 0.75 kW 3 spindle speeds: 2800/4000/5000 rpm Brake Extraction port diameter: 120 mm Dimensions (L/W/H): 250 x 120 x 120 cm Weight: 935 kg

Būklė: naudotas, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used Dodpfx Afsxl Ha Sofeki - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressure 2 kg/cm² Heating: 2 x 1.8 kW - Long belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Maximum saw blade diameter 250 mm With chain feed - Extraction unit for sanding machine and saw 0.55 kW Airflow approx. 11 m³/min Push-button control with main and emergency stop switches Machine mounted on chassis Installation footprint (according to manufacturer): 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as seen”. Payment terms: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex stock

Būklė: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Dsdshp Rdlepfx Affoki Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -

Būklė: naudotas, Staklė: Didžiausias obliavimo plotis: 400 mm Didžiausias obliavimo aukštis: 240 mm Mažiausias apdirbamo elemento ilgis: 200 mm Peilio veleno skersmuo: 700 mm Peilių skaičius: 3 Peilio veleno apsukos: 5000 aps./min Rankinis darbo aukščio reguliavimas Dkedpfx Afsxwvqdefsi Lygiavimo staklė: Bendras stalų ilgis: 1810 mm Reguliuojami stalai Veleno triukšmo slopinimas Veleno apsauga Ištraukimo jungtis: 2x120 mm Pakreipiamas lygiuotuvės liniuotė Maitinimas: 400 V Variklio galia: 5 kW Bendri matmenys: Ilgis: 2030 mm Plotis: 800 mm Aukštis: 1160 mm

Būklė: naujas, Gamybos metai: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically operated height and tilt adjustment, 0–46° with automatic correction of cutting height during tilting - Control unit at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Rip fence, manually adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4000 rpm - AKE clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Stepless speed adjustment from 2,000 to 6,000 rpm - Exact adaptation of speed to the material increases cutting quality and saw blade service life Extended cutting height for one-sided tilting: This option is equipped for one-sided tilting with a large extraction hood allowing a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, maximum saw blade diameter is 500 mm, maximum cutting height 179 mm. Only available in combination with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit for single-sided tilting - With electromotive height and lateral adjustment, scoring blade height programmable with rapid lowering and lifting, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofit only possible on machines prepared for scoring unit. Dedpfxjw I Uxco Affeki LED lighting - Highly energy-efficient LED technology for clearly marking the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precise running. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, keep the upper carriage absolutely precisely aligned with the lower carriage on their respective hard-chromed round guide bars. This quality of movement is maintained even after decades of use and contamination. The carriage construction features a highly torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, positively fitted to the upper carriage, serves as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off switch on double roller carriage - The On/Off switch is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off. This saves steps and increases safety. Angle-mitre fence, crosscuts up to 3500 mm - This ALTENDORF-patented fence with integrated length compensation makes it easy to cut mitres and angles precisely in one function. In both positions, the swing angle is infinitely adjustable by up to 49° and is displayed via a measuring scale. The backlash-free and robust folding stops can be easily shifted and, as single stops, set along the full length up to a maximum of 3,500 mm.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1300 x 2070 x 1135 mm Weight: 320 kg Total power requirement: 2.2 kW 5-in-1 Combination Machine K5 250-1300 Functions: Sawing, Spindle Moulding, Surface Planing, Thickness Planing, Slot Mortising Circular Saw: - Max. saw blade diameter: 254 mm - Saw blade bore: 30 mm - Speed: 4750 rpm - Saw blade tiltable: 0°–45° - Max. cutting height at 90°/45°: 75 / 60 mm - Sliding table: 430 x 1300 mm - Motor power / Input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Spindle Moulder: - Spindle diameter: 30 mm - Spindle speed: 6500 rpm - Spindle length: 80 mm - Max. spindle stroke: 80 mm - Max. table opening: 144 mm - Motor power / Input power: 1.5 / 2.2 kW - Voltage: 400V / 50Hz Surface Planer / Thickness Planer: - Cutterblock diameter: 75 mm - Cutterblock with 3 knives Dedsvz E Sijpfx Affeki - Speed: 4000 rpm - Feed rollers diameter: 32 mm - Max. working width surfacing: 250 mm - Max. chip removal surfacing: 5 mm - Tiltable fence: 0°–45° - Max. working width thickness planing: 248 mm - Max. chip removal thickness planing: 2.5 mm - Max. workpiece height thickness planing: 190 mm - Feed speed: 8 m/min - Table size (surfacing): 1085 x 256 mm - Table size (thickness): 600 x 248 mm - Motor power output / input: 1.5 / 2.2 kW - Voltage: 400V / 50Hz - Dimensions: L=1300 mm, W=2070 mm, H=1135 mm - Table height: 850 mm - Weight: 320 kg

Būklė: naujas, The ALTENDORF F 25 offers everything a panel saw needs in a compact footprint. Whether it's for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder that simply makes you more productive. Materials such as wood-based panels, solid wood, wood-like materials, or extruded profiles can be efficiently processed with maximum precision, straightforward handling, and outstanding cut quality. The saw unit, which can tilt to one side, also enables angle cuts. The smooth-running double roller carriage based on the Altendorf system, as well as digital height and tilting display, are standard features. A machine equally suited for both beginners and professionals. Double roller carriage Tiltable Manual height and tilt adjustment Parallel fence with manual fine adjustment Angle/miter fence Preparation for subsequent installation of a scoring unit ----- Technical Specifications ----- Tilting range: 0 - 46° Carriage length: 3,200 mm Cutting width: 1,000 mm Cutting height: 100 mm Max. saw blade Ø: 315 mm Max. blade projection: 104 mm Dedpfx Afeu R S Hcefoki Non-CE version: Max. saw blade Ø: 350 mm, Max. blade projection: 121.5 mm Crosscut fence extendable up to: 3,450 mm Speeds: 4,200 rpm Motor output: 4.4 kW, 5.5 HP Working table height: 880 mm - Large extraction hood available as an option - - New display machine -

Būklė: naujas, Gamybos metai: 2024, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointer table length: 2300 mm Jointer fence angle adjustable: yes Dkjdevadxlepfx Affji Jointer tables lift: pneumatic Maximum thicknessing height: 250 mm Thickness table height adjustment: electric with position control Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Extraction connection: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Būklė: naujas, Gamybos metai: 2025, Cutting length: 2500 mm Cutting width at rip fence: 1000 mm Cutting width at crosscut fence: 1565 mm (telescopic extension up to 2550 mm) Cutting depth: 170 mm Scorer: no Saw blade height adjustment: handwheel Saw blade tilting adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 9.2 kW Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 2900 mm Dedpsqx Igqsfx Affski Machine width: 1800 mm Weight: 800 kg

Būklė: naujas, Gamybos metai: 2026, The Cormak PT265 Planer-Thicknesser is a robust and well-engineered machine, offering extensive adjustment capabilities and mechanical processing of both hardwood and softwood. The adjustment itself is simple, and converting the planer to thicknessing operation takes just a few seconds. Latest machine version with an innovative table opening system: ❌ Competing machines of the old type are fitted with “butterfly” tables. Before each job, the infeed and outfeed tables need to be recalibrated. Even small discrepancies between them lead to material damage and undesirable effects. ✔️ The new integrated table solution allows precise adjustment of both tables simultaneously! Once set, the tables remain permanently calibrated. When adjusting the planing height, both tables move in unison. ✔️ This innovation not only saves time and makes the machine more convenient to use, but also increases planing precision by 30% compared to previous systems. This is particularly important for working with thinner materials. Stable, vibration-resistant construction The machine’s weight of up to 170 kg, combined with wide, 265 mm precision-ground cast iron tables, ensures high stability and safe operation. Additional rubber feet ensure operation is virtually vibration-free. VERSION with the most powerful motor: S6 2.6 kW total output The PT265 Planer-Thicknesser stands out with its exceptionally powerful S6-rated 2.6 kW motor (2.2 kW S1). This is significantly more than most competitor machines, resulting in higher performance and stable operation. A more powerful motor means smooth operation and effortless processing of hard materials: Hardwoods require greater force to machine. The powerful motor handles this with ease. Effortless changeover from jointer to thicknesser. Switching from jointer to thicknesser mode is quick and straightforward—simply release the eccentrics, raise the tables, and reposition the chip extraction cover. Precision working. - Smooth height adjustment of tables with a scale. - Thicknesser table is centrally mounted on a column and features an adjustment handwheel. - Aluminum tilting fence (700x150 mm) with scale strip for precise adjustment between 90-45 degrees. Dkodpfx Aovxhznjffoi Technical data: Cutterhead diameter [mm]: 75 Cutterhead speed [rpm]: 4000 Extraction port diameter [mm]: 100 Tilting fence angle [°]: 0 - 45 Number of knives: 3 Cutterhead length [mm]: 262 Knife dimensions [mm]: 2500x300x30 Maximum planing width [mm]: 265 Maximum thicknessing width [mm]: 265 Maximum planing height [mm]: 180 Maximum thicknessing depth of cut [mm]: 3 Maximum planing depth of cut [mm]: 2.5 Thicknesser feed speed [m/min]: 6 Fence dimension [mm]: 700 x 150 Machine dimensions (L x W) [mm]: 1080 x 269 Weight [kg]: 170 Total motor power S6: 2.6 kW Power supply: 400V