Vertikalaus sūpynės svirties plokščias šlifavimo staklės

GMN Georg MÜLLER MPS 2

Būklė: naujas, Technical Specifications: Distance from grinding wheel axis to column axis: 300 mm Maximum distance table to grinding wheel: 280 mm Maximum grinding area: 140 x 300 mm Rapid traverse per speed: 2 Fine feed via micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Grinding wheel speed: 2840 rpm Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Equipment: Fgjdpfxjvnriue Af Ajb - Column made of cast iron, mounted on adjustable ball roller bearings - Wet grinding system - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (initial set) - Grinding wheel guard and table enclosure - Operating and maintenance manual - CE declaration of conformity

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 4105, Grinding area: approx. 130 x 255 mm Fgodpfx Aoh Ugwvof Ajb Grinding speed: 2800 rpm Table size: 150 x 300 mm Drive motor: 380 V, 1.5 kW Required space: 750 x 700 x 1700 mm Weight: approx. 380 kg Cup wheel diameter: 180 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 23087A, SPECIFIKACIJA Maksimalus šlifavimo paviršius: 140 x 300 mm Atstumas tarp kolonos ir rato ašies: 300 mm Didžiausias atstumas tarp stalo ir rato: 280 mm Spartus padavimas per vieną rankenėlės apsisukimą: 2 mm Mikrometrinis padavimas maža rankenėle: 0,01 mm Taurinio disko galia: 2,2 kW Rato greitis: 2840 aps./min. Apytikslis svoris: 400 kg Fgsdpovntgusfx Af Ajb ĮRANGA: 260 x 140 x 75 mm (storis) magnetinis stalas Aušinimo sistema Apsaugos

Būklė: naujas, Condition: New Delivery time: approx. 2 weeks from order confirmation Country of origin: Italy Price: €17,940 Lease rate: €344.45 Grinding length: 350 mm Distance spindle to table: 300 mm Fgsdjywcl Rspfx Af Ajb Table: 500 x 160 mm Grinding area: 350 x 150 mm Magnetic chuck: 300 x 150 x 55 mm Spindle speed: 2,800 rpm Spindle motor: 3.6 kW Length: 1,020 mm Width: 820 mm Height: 2,170 mm Weight: 440 kg Grinding wheel dimensions: Ø 200 x 78 x 78 mm This surface grinding machine with a fixed table is based on the R.V. 500 model but is distinguished by its long, quadruple-supported column with an additional, reinforced column support. Thanks to its rigidity and geometrical stability, this surface grinder is ideally suited for grinding precision parts with considerable height: single or series components from tool and die making, moulds, punches, gears, and much more. The vertical feed spindle nuts and the alignment pins for axis orientation ensure consistently optimal working conditions for this fixed-table grinding machine. • Cast iron bed for long-term geometrical stability of the machine. • Cast iron column, protected by bellows and mounted in four adjustable precision bearings, generously dimensioned for this machine type. • Three-phase motor with dual-circuit air cooling to prevent overheating during continuous operation and to maintain constant motor shaft and bearing temperatures. • Hardened, ground, and dynamically balanced shaft, mounted in precision ball bearings, generously dimensioned for this model and self-adjusting via spring preload to compensate for thermal expansion. • Vertical feed spindle, mounted in opposing, adjustable ball bearings, delivers optimal movement to keep the grinding area unobstructed and free from dust accumulations in this fixed-table model. • Metal bellows for enhanced protection of the vertical feed spindle. • Opposing bronze nuts compensate for wear on the vertical feed spindle over time. • Alignment pins serve for spindle axis orientation, ensuring parallel surfaces even after prolonged use. • The hand wheel is triple-supported and connected to the spindle via two helical gears. It is equipped with a graduated drum supported by an axial bearing, allowing material removal of 0.01, 0.02, or 0.03 mm per pass. • Rapid traverse per hand wheel revolution: 2 mm. • A knob with lever enables programmable micron feed at 0.01, 0.02, 0.03, or 0.04 mm per pulse, simplifying operation by eliminating the need for continuous step control. • Key slot for optimal use of grinding wheel height and for clamping non-magnetic parts and accessories such as magnetic chucks, self-centering chucks, and angle plates. • Low-voltage controls, safety guards, indicator lights, and all equipment required to comply with safety and conformity regulations for this type of fixed-table grinding machine. • Handles, design, and dimensions correspond to current standards...

Būklė: naujas, Condition: New Delivery time: approx. 2 weeks from order Country of origin: Italy Price: €17,940 Leasing rate: €344.45 Grinding wheel dimensions: Ø 200x78x78 mm Speed: 2800 rpm Distance grinding wheel to table (without magnetic chuck): 300 mm Magnetic chuck: 300x150x55 mm Grinding area: 350x150 mm Table: 500x160 mm Motor power: 3.6 kW Length: 1020 mm Width: 820 mm Height: 2170 mm Weight: 440 kg This surface grinding machine with fixed table is based on the R.V. 500 model but differs by its long, quadruple-guided column with additional robust column support. Owing to its rigidity and geometric stability, this surface grinder is ideally suited for grinding precision parts of considerable height: single or series parts from toolmaking, molds, dies, gears, and many more. The nuts of the vertical feed spindle and the alignment pins for axis alignment on this fixed-table grinding machine ensure consistently optimum operating conditions. Fgodoyv Iqvopfx Af Aeb Cast iron bed for lasting geometric stability of the grinding machine. Cast iron column protected by bellows and mounted in four adjustable precision bearings, generously sized for this type of fixed-table grinding machine. Three-phase motor with double-shell air cooling to prevent motor overheating during continuous operation and to maintain constant temperature of the motor shaft and bearings. Hardened, ground and dynamically balanced spindle, mounted in precision ball bearings, generously dimensioned for this type of surface grinder with fixed table, self-adjusting via spring pre-tension to compensate for thermal expansion. Vertical feed spindle mounted in opposing, adjustable ball bearings for optimal movement, keeping the grinding wheel area free of obstacles and preventing dust accumulation. Metal bellows offer further protection of the vertical feed spindle. Opposing bronze nuts compensate for wear of the vertical feed spindle over time. Alignment pins align the grinding machine motor with the axis, ensuring surface parallelism even over prolonged use. The handwheel is triple-supported and connected to the spindle via two helical gears. It features a graduated drum supported by an axial bearing, enabling a material removal per pass of 0.01 - 0.02 - 0.03 mm. Rapid traverse per handwheel revolution is 2 mm. A rotary knob with lever enables programmable micrometric feed of 0.01 - 0.02 - 0.03 - 0.04 mm per pulse, facilitating operation by eliminating the need for a continuous step control. Slot for optimum utilization of grinding wheel working height and for clamping non-magnetic parts and accessories such as magnetic chuck, self-centering chuck, and angle plates. Low-voltage controls, protective devices, indicator lights, and all necessary equipment to comply with current safety and conformity standards for this type of surface grinding machine with fixed table. Handles, design, and dimensions of the fixed-table grinding machine conform to current standards...