Ultragarsinis valymo įrenginys

Glogar MU-200L

Būklė: beveik kaip naujas (parodų įrenginys), ATEX-CERTIFIED PUMP Hodpjftzgxsfx Aa Djr Oil-bath rotary vane vacuum pump. Available in stock. Fully overhauled unit. Supplied with warranty. Nominal flow rate: 30 m3/h at 50Hz. Ultimate vacuum: 1x10^-3 mbar abs. For any questions, please contact us.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Parts Cleaning Machine, Spray Cleaning System Type L800FP Hodouxuv Aepfx Aa Dor Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter for pump protection Delivery: ex works, FCA

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 680 kW (924,54 AG), Įranga: aušinimo blokas, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Hodovllxdopfx Aa Dsr Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9+25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Output depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow: 162,500 / 131,000 m³/h Motor power input: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise level: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully operational.

Būklė: geras (naudotas), Copeland Compound Refrigeration Units Deep-freeze / Normal cooling - 4x Copeland Compressors D6DT5-320X-AWM/D - Cooling capacity: 220 kW at -10ºC / +40ºC, 56 kW at -35ºC / +40ºC - Displacement: 4 x 126.9 m³ - With original Güntner condensers GVH 067B/2x3N - Quantity in stock: 1 unit - Refrigerant: R404A - In very good condition Hedpfx Aeg N Hu Sja Dor We have many other refrigeration units: Bitzer, Copeland, Frascold, Lunite, Küba, Güntner, ECO, Alfa-Laval, Goedhart, Helpman We offer a wide selection of refrigeration equipment: chillers, compressors, coolers, condensers, cold rooms, refrigerating and catering furniture as well as machinery and equipment for gastronomy and meat processing. Check our other listings or call us—many items are not listed on Machineseeker.

Būklė: visiškai atnaujintas (naudotas), REKORD 400 MODIFIED WITH TRAY AND COOLING SYSTEM SHARPENING MACHINE FOR CIRCULAR SAWS MADE OF CARBIDE AND HSS (FULL OIL PROCESSING) FEATURES Grinding wheel diameter: 150 mm Grinding wheel motor: 1 HP 0.25 HP movement motor for grinding carriage Cooling system indicator (fully oil-bath) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifying lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable via potentiometer Manual cutting angle adjustment using scale rod No. 1 Copying wheel No. 1 Diamond wheel, diameter 150 x 4 - 60° angle No. 1 Bakelite wheel for HSS Minimum blade diameter: 30 mm (with small blade holder on request) Maximum blade diameter: 400 mm Hedpfx Aoh A N R Soa Djr

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), SMS MEER CNC-Doppelseitige Anfasmaschine Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Hedpfeghrguox Aa Djr Arbeitsbereich: Rohrdurchmesser Ø 21,3 – 114,3 mm Wandstärke: 2,3 – 11 mm Länge: 6–12 m Die Anlage besteht aus zwei RFA14-Anfasmaschinen mit Transportvorrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Innen- und Außen-Anfasen beider Rohrenden. Das Rohrbearbeitungsspektrum umfasst einen Durchmesserbereich von 21,3 bis 114,3 mm und eine Wandstärke von 2,3 bis 11 mm bei einer Rohrlänge von 6 bis 12 m. Die Fördertechnik im Bereich der Anfasmaschinen dient dazu, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu transportieren.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 30 000 mm, bendras aukštis: 4 300 mm, bendras plotis: 6 500 mm, ruošinio svoris (maks.): 100 kg, temperatūra: 220 °C, šildymo galia: 80 kW (108,77 AG), ruošinio aukštis (maks.): 1 200 mm, ruošinio ilgis (maks.): 2 500 mm, izoliacinė medžiaga: Mineralwolle 75 kg/m³, izoliacijos storis: 150 mm, ruošinio plotis (maks.): 800 mm, The continuous processing system consists of the following components: - Chemical pre-treatment by spraying - Dryer Hsdpfx Ajum Uflja Djr - Powder coating system - Powder curing oven - Conveyor technology (indexing mode) - Electrical control system

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii starting from 1.5xD → Maximum bending capacity (tube): 42.4 x 3.25 mm (steel, max. Re 240 N/mm²) → Maximum bending capacity (tube): 30 x 30 x 3 mm → Maximum bending capacity (tube): 42.4 x 2 mm (stainless steel, 0.2 260 N/mm²) → Total connected load: 3 kW → Tube feed-in length: approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The touch display controller allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed by the chuck in the carriage, ensuring precise tube positioning and highly accurate geometry production. Standard features also include pre-bending geometry control: if the bend is initiated at the wrong position, the system blocks the process, thereby preventing operator errors. Optional additional features increase convenience, output, and overall system efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is via USB stick or network. Existing tube geometries can be imported with the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive for feed → Servo drive for rotation → Three-jaw chuck for tube fixation in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After entering length and angle, the control calculates feed and bending angles automatically. Hodpfotr U Hlox Aa Der Power supply: 400V 16A Dimensions: L:2.3m x W:1m x H:1.4m Weight: approx. 1200 kg

Būklė: beveik kaip naujas (naudotas), HSS saw blade sharpening machine LOROCH model SW Hjdpfx Aaoi El Hcs Djr

Būklė: naujas, Column drill, precise, quiet, and reliable. Manufactured in accordance with strict safety standards. Precision spindle axis with hardened Morse taper, ground base plate. Equipped with electronic speed variator. Swivel work table + vice, 350 x 250 mm. Drilling capacity in steel: R50 mm ø 22. Hsdpfx Aaeir Aihs Dsr Tapping capacity in steel: R50 mm M 14. Spindle taper: MT2 Spindle travel: 90 mm. Spindle sleeve diameter: 52 mm. Column diameter: 98 mm. Distance column to spindle center: 201 mm. PU belt drive Electronic variator (E). Spindle speed: 270 ÷ 4,200 rpm. Motor power: 0.75 kW / 220 V Single-phase. Overall dimensions (H x W x D): 1950 x 600 x 680 mm. Weight: 220 kg.