CNC tekinimo staklės 1540 x 12.000 x 20 tonų

Giuseppe GIANA GGH 1100/760 x 12.000 CNC

Sąlyga: geras (naudotas), Gamybos metai: 1992, Fully automatic bandsaw, manufacturer: JAESPA, type: W400 AZ Control: Minipos 807, year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Saw band dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Giodpjgf H Sajfx Abdel Total power requirement: 4 kW Weight: approx. 2500 kg Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Required space: 2.8 x 2.8 x 2 m

Sąlyga: naudotas, Swing diameter over bed: 2400 mm Swing diameter over cross slide: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Faceplate diameter: 1650 mm Speed range: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over cross slide: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm (with special jaws up to 2050 mm) Clamping diameter in tailstock faceplate: 300 - 1400 mm Max. workpiece weight: 70,000 kg Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speeds, infinitely variable in 4 steps: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center cone angle: 70° Slides Travel of grooving slide: 500 mm Travel of plan slide: 1400 mm Rapid traverse long axis: 2000 mm/min Rapid traverse plan axis: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, plan: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Diameter of faceplate (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange center cone angle: 70° Rapid traverse: 1250 mm/min Special Equipment Gijdpfjxddvnex Abdjl Copying attachment for first support - Copying length: 8500 mm - Max. copying depth in one pass: 500 mm Boring attachment - Boring bar: 460 x 390 mm - Boring diameter: 600 - 1000 mm - Max. boring depth in one pass: 2700 mm For Ks of 200 kp/mm² - s max. = 1.5 mm/rev - a = max. chip section 30 mm² with 1000 mm overhang - With increasing boring depth, chip section is reduced One taper turning guide, setting angle up to 8° and max. taper length (in one process) of 2000 mm, setting accuracy ± 5 minutes. One taper turning guide, setting angle up to 15° and max. taper length (in one process) of 1000 mm, setting accuracy ± 5 minutes. 125 kg auxiliary crane at the headstock.

Sąlyga: naudotas, Gamybos metai: 2016, CNC MATRIX 2, stalas 3500 x 800 mm, eigos 3000 x 800 x 720 mm, veleno greitis 18 000 aps./min., 48 įrankių laikiklis, aušinimas per veleną, centrinis pertvaras švytuokliniam darbui, sukamasis stalas SANKYO DS50C-R1-2, 5 sinchroninių ašių, drožlių konvejeris. Gijdpfxoxyzhae Abdol

Sąlyga: geras (naudotas), Gamybos metai: 2019, Niles N 40 MC - 6000 tekinimo-frezavimo centras, Pagaminimo metai: 2019, Valdymas Siemens SI 840 D SL, X/Z ašys 850/6820 mm, Y ašis -200 / +400 mm, B ašis 0,001°, B ašies pasukimo diapazonas -105° / +95°, Įrankių keitiklis 192 pozicijos, Pagrindinio veleno C ašis 0,001°, Veleno greitis iki 1750 aps./min., 2 pavarų pakopos, Didžiausias ruošinio svoris tarp tvirtinimo galvutės ir atraminio taško 6.000 kg, Gsdpfxjw T Ag Ee Abdsil Variklio galia 87 kW, Tvirtinimas HSK 100, Luneta 70 - 425 mm, Atraminis taškas,

Sąlyga: geras (naudotas), Atstumas tarp centrų: 6500 mm Centrų aukštis: 665 mm Sukimosi skersmuo virš lovos: 1270 mm Sukimosi skersmuo virš skersinio: 1000 mm Godpfxew R Avbo Abdeil Veleno apsukos: 3,55-710 aps./min Plokštės skersmuo: 1200 mm X ašies eiga: 600 mm Pagrindinio veleno kiaurymė: 128 mm Griebtuvo cilindro skersmuo: 200 mm Griebtuvo cilindro eiga: 350 mm Griebtuvo vidinis kūgis: DIN 55028 Pagrindinio veleno galvutė: DIN 55027 Priedai: 3 lunetos Dokumentacija

Sąlyga: naudotas, Gamybos metai: 2010, tekėjimo ilgis: 6 500 mm, tekėjimo skersmuo: 880 mm, veleno skylė: 165 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 840 D, Description: General: Year of manufacture: 2010 Control system: Siemens 840 D Turning diameter: 880 (750) mm Swing diameter: 900 mm Turning length: approx. 6,500 mm Spindle bore: 245 mm Tool holder: Capto C8 Main spindle: Technology: Geared spindle Speed: 1,600 rpm Power: 60 kW Torque: 4,472 Nm C-axis: 0.001° Gsdpex Axyljfx Abdjil Spindle bore: 165 mm 3-jaw chuck: SMW Autoblock KNCS-N-630-165 Tool carrier (X/Y/Z): Technology: Swivel head with milling spindle Speed: 6,000 rpm Power: 30 kW Tool holder: Capto C8 Torque: 315 Nm X-axis: 920 mm Y-axis: 500 mm (-200/+300 mm) Z-axis: 6,870 mm B-axis: 200° (-110°/+90°) Tailstock + Steadies: Quill diameter: 180 mm Quill stroke: 200 mm Steady rest carriages: 2 units, 400 mm wide Steady rest I: SMW Autoblock SLU (45 - 310 mm) Steady rest II: SMW Autoblock SLU (125 - 460 mm) Tool magazine I: Technology: Drum magazine (double) Number of stations: 72 units Tool changer: Double gripper on shuttle Max. tool diameter: 110 mm (250 mm) Max. tool length: 800 mm Max. tool weight: 25 kg Tool magazine II: Technology: Pick-up magazine Max. usable length: 1,550 mm Max. usable weight: 150 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure system, 80 bar Coolant temperature control: Immersion recooler Workpiece measurement: Wireless measuring probe Emulsion mist extractor: LTA air clean Work area door: Automatic Set-up mode: Electronic handwheel Tools: Various Capto C8 holders Steadies: 2x SMW Autoblock steady rests 3-jaw chuck: SMW Autoblock KNCS-N-630-165

Sąlyga: paruoštas naudoti (naudotas), valdiklio modelis: CNC, tuščias svoris: 70 000 kg, bendras ilgis: 10 000 mm, bendras plotis: 3 230 mm, bendras aukštis: 1 900 mm, sūpynės skersmuo virš skersinio vežimo: 6 000 mm, Gehaarde draaibank met vier geharde lineaire geleidingen Werkstukgewicht tussen de centers: 20 ton Siemens aandrijvingen en motoren Heidenhain linialen en encoders Super Lathe-concept/licentie van Binns Machinery (VS). De ultieme prestaties voor zware draaibanken, specifiek ontworpen voor staalfabrieken, walserijen en smederijen voor de productie van onder andere turbinerotoren, grote assen en staven. Belangrijkste verschillen ten opzichte van een conventionele draaibank: - Zeer breed bed = extreem hoge stijfheid = geen trillingen - Zwaar en groot frame voor maximale stabiliteit - Geschikt voor het spannen van zware werkstukken tussen de centers - Het totale gewicht van de machine is exceptioneel hoog Gijdpfx Abewaivhsdsl Draaidoorsnede boven bed: 1.200 mm Draaidoorsnede boven dwarsslede: 850 mm Spindelvermogen: 165 kW Aantal toerentallen: 3 – 320 tpm

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Turning length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, quill diameter: 125 mm, quill stroke: 280 mm, total connected load: 62 kW. Machine dimensions (X/Y/Z): approx. 6500 mm/2500 mm/2300 mm, control: Heidenhain, operating hours: approx. 9000 h. Includes accessories such as a steady rest. Documentation available. An on-site inspection is possible. Giedevwcwujpfx Abdjl

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Savybės: Atstumas tarp centrų: 4500 mm Giodpfx Abjvy Adgedjl Maks. tekinimo skersmuo: 750 mm Veleno skylės skersmuo: 105 mm Valdymas: Heidenhain Komplekte 2 x griebtuvas, 500 mm ir 315 mm skersmens Komplekte 2 x pastovios atramos

Sąlyga: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 1 000 mm, tekinimo skersmuo virš slankiojančio stalo: 710 mm, tekėjimo ilgis: 8 000 mm, Used heavy-duty lathe with extensive steady rest equipment – Ideal for pipe machining and long rollers! This robust conventional lathe, featuring an impressive turning length of 8,000 mm, was specifically designed for applications in pipe machining. The well-thought-out machine concept allows the tool to pass smoothly by the open steady rests—ideal for precise machining of long, hollow workpieces. Technical Highlights: • Swing over bed: 1,000 mm • Swing over cross slide: 710 mm • Centre height: 900 mm Giedpov Tnttsfx Abdol • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tonnes • Main drive: 30 kW with frequency converter, infinitely variable Design Advantages: • One-piece cast machine bed, artificially aged – for maximum stability and freedom from internal stresses • 5 hardened and ground guideways for highest precision • Infinitely variable longitudinal feed via ball screw – no Norton or tumbler gearbox • Tailstock traversing motorized with hydraulic clamping • Manually adjustable cross slide with trapezoidal lead screw • 4-position tool post, manually indexable • Compound slide guided by three ways – for exceptional running smoothness Steady Rests & Pipe Machining: • Various steady rests (fixed and travelling) optionally available • Motorized steady rest brackets with hydraulic clamping • Steady rest quill adjustment conveniently accessible from the operator side • Travelling steady rests can be installed on the left or right as required Application: Thanks to its thoughtful design, this machine is excellently suited for light to medium-duty cutting operations – particularly for precise pipe machining. The infinitely variable speed and feed control ensures high flexibility and operating comfort.