Suvirinimo pasukamas stalas, rezervuaro pasukimo įtaisas

Gieseking KT 600

Sąlyga: geras (naudotas), Welding positioner Gieseking, 600 kg load capacity Good condition Continuously variable speed control, approx. 0.01 to 1.5 rpm With foot remote control Gtedpslamrwjfx Aczst Diameter: 0.8 meters Horizontal height: 0.95 meters Height when tilted to plate center: 0.8 meters Length: 1.2 meters Width: 1.1 meters

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock Gtedpjvx E Ncofx Aczet

Sąlyga: naujas, Gamybos metai: 2024, 600 kg load capacity Height-adjustable welding turntable with 100 mm through-hole Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Height when tilted min. 0.45 m, max. 0.95 m Speed from 0.01 to 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Gsdpjg Tdpgefx Aczott Very robust design

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing Gtedpfx Acsd Ab H Hszet • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: naujas, Article: Welding Turntable 50 kg Type: KT-50 without chuck Max. load capacity: 50kg horizontal Max. load capacity: 25kg vertical Rotation speed: 1–7.5 rpm Rotational direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor output in operation: 0.08 kW Godpfxsbambre Aczett Motor standby output (kW): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price excludes quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and nationwide shipping within Germany: approx. €80

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Gtsdpfxerypmgj Aczst Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor, infinitely adjustable from 0 to 90° Speed continuously adjustable from 0.01 to approx. 5 rpm Includes foot remote control Digital display with welding time limitation (optional)

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM2000.5000 H-322.41.9000.3E 130.20, Lifting capacity: 5t Reeving: 4/1 Lifting height: 9m Lifting speeds: 8/1.3 m/min Trolley travel speeds: 20/5 m/min FEM group: 2M Gtjdpjvx E I Sjfx Aczjt Operating voltage: 400V Control voltage: 230V Flange width: 300mm Several units immediately available from stock

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 5 000 kg, Complete set including manual and dual foot remote control Digital speed display Hydraulic height adjustment Dimensions: Gtsdpfol Dq U Ujx Aczet Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.9 rpm CE certified

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (naudotas), Dumeta welding positioner, hydraulically height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole 100–200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Height when tilted: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 – 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Gtsdpfxjhua Dqj Aczst Very robust design

Gamybos metai: 1960, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and center of gravity offset 300 mm: 10 t Gtodpfx Aecblc Sjczot Load capacity with vertical faceplate position and center of gravity offset 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically steplessly adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range up: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor level: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t