Suvirinimo sukamasis stalas, reguliuojamas 3 ašių aukštis

Dumeta D-TLP-HE-05

Sąlyga: naujas, Table diameter: 700 mm Table load capacity: 0.5 t Swivel range: 0 - 135 degrees Rotation speed: 0.2 - 3 rpm Height adjustment: 400 - 900 mm Bore diameter: 100 mm Maximum welding current: 500 Amps Total power requirement: 0.75 kW HYDRAULIC HEIGHT-ADJUSTABLE TILTING TURNTABLE WITH THROUGH BORE • Self-locking gearbox, no overrun or backlash with eccentric loads. • Electronic components by Siemens and Schneider. • Frequency-controlled, stepless rotation drive speed. • Turntable with large through bore and T-slots. • High stability due to sophisticated design. • CE certification. Fedsfv Azljpfx Ab Seft • Excellent price/performance ratio. • The D-TLP series is supplied with welding current transmission, remote control and foot switch (left/right).

Sąlyga: naudotas, Gamybos metai: 1982, mašinos/transporto priemonės numeris: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Table size: 860x240mm, 3 T-slots 14mm, spindle mount SK30, Fedsiqkc Ispfx Ab Ssft Travel paths: X/Y/Z = 450/200/430mm, horizontal speeds: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 vertical milling arbor supports, 1 collet chuck with key, 1 machine vice with hand crank.

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Fsdjvx E Ncopfx Ab Ssft Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Sąlyga: naujas, Table diameter: 350 mm Table load capacity: 0.1 t Swivel range: 0–90 degrees Fedpfx Abogvkk Nj Ssft Horizontal table load: 100 kg Vertical table load: 50 kg Bore diameter: 30 mm Table rotation speed: 0.5 – 5 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.2 t Space requirements: approx. 0.5 x 0.5 x 0.5 m Welding table with hollow shaft D-DWP Rotary tilt tables with bore for turning, tilting, and welding of small workpieces up to 100 kg. - Rotary and tilting axis - Stepless speed control - Compact design - Includes foot pedal

Sąlyga: naujas, Gamybos metai: 2024, 600 kg load capacity Height-adjustable welding turntable with 100 mm through-hole Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Height when tilted min. 0.45 m, max. 0.95 m Fodpjg Tdpgefx Ab Seft Speed from 0.01 to 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Ffodpfsd Ab H Hsx Ab Sot Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: naujas, Article: Welding Turntable 50 kg Type: KT-50 without chuck Max. load capacity: 50kg horizontal Max. load capacity: 25kg vertical Rotation speed: 1–7.5 rpm Rotational direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor output in operation: 0.08 kW Motor standby output (kW): N/A Dimensions: 430 x 430 x 375 mm Fedpfx Ajbambrob Sjft Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price excludes quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and nationwide shipping within Germany: approx. €80

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Schiess CNC vertikalioji tekinimo staklė su C ašimi, 1992 m., modernizuota 2012 m. CNC NUM 1060 FLEXIUM 2 stalai, stalo skersmuo 2000 mm – maksimalus tekinimo skersmuo 2500 mm – maksimali stalo apsukų sparta 201 aps./min. – stalo galia 56 kW Ffodjxpqm Rspfx Ab Sst apkrova (įskaitant stalą) 16000 kg judinama skersinė sija, 12 padėčių, žingsnis 50 mm laisva erdvė po veleno nosimi min. 795 mm, maks. 1345 mm RAM Z eiga 1000 mm C ašis – 360000 padėčių; frezavimo galvos sūkių dažnis maks. 1600 aps./min.; frezavimo ašies galia 22 kW; pavarų skaičius – 2 ĮRANKIŲ magazinas: tekinimo įrankiai – 20 padėčių, frezavimo įrankiai – 35 padėtys 1 frezavimo galva WIDAFLEX UTS80 1 frezavimo galva ISO 50 Renishaw kontaktinė zonda (detalėms) MP 60 Įrankių išankstinis nustatymas – Transmit funkcija: G20 / G21 – NĖRA standaus sriegimo SKIEDRŲ KONVEJERIS Priekinės durys: dalinis atidarymas M0 / pilnas atidarymas

Sąlyga: geras (naudotas), Gamybos metai: 2009, padavimo ilgis X ašis: 6 000 mm, padavimo eiga Y ašimi: 3 000 mm, padavimo ilgis Z ašis: 1 500 mm, valdiklio modelis: HAIDENNAIN, ruošinio ilgis (maks.): 6 000 mm, ruošinio plotis (maks.): 2 500 mm, stalo plotis: 6 000 mm, stalo ilgis: 2 500 mm, Gantry milling machine with 5-axis head Fsdovcqybepfx Ab Seft

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), Technical Data: - Load capacity: 15,000 kg - Own weight: 960 kg - Workpiece diameter (insertable): approx. 50 - 3,200 mm Ffjdpfxsd Iuqas Ab Sot - Roller diameter: 250 mm - Roller width: 240 mm - Rotational speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control