Mobilus trupinimo ir rūšiavimo įrenginys

General Makina GNR 03 Mobile Crusher

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Hard rock chipping plant – essentially consisting of: Iaedpfx Aeufih Dsaujr - Feed hopper - SVEDALA H-36 cone crusher - Dosing hopper - SANDVIK H-200 cone crusher unit with pre-screening machine - Dosing hopper with discharge conveyor - 2 x double-deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm - Various conveyor and stockpile belts - Complete electrical installation with control cabinet in container

Būklė: naudotas, galia: 55 kW (74,78 AG), kuro tipas: dyzelinas, kėlimo aukštis: 9 070 mm, Gamybos metai: 2024, veikimo valandos: 500 h, Unladen weight: 7,320 kg Engine make: Deutz Lifting capacity: 3,300 kg Maximum speed: 25 km/h Serial number: MAN00000C01124485 Front tyre condition: 100 Rear tyre condition: 100 Ijdpfx Ajtr Hmljauoar Transport dimensions (L x W x H): 4.68 x 2.33 x 2.3 m Contact PFEIFER GROUP for further information.

Gamybos metai: 1963, būklė: paruoštas naudoti (naudotas), Lifting capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Iedpfx Ajh I Edveaujar

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Processing plant for (track) ballast Iaodpfx Astpamgjauer 40 m³ feed hopper with push wagon Impact crusher OMT 120 kW with feed and discharge chutes Double-deck screening unit 1,400 x 4,000 mm with conveyor and stockpile belts complete electrical installation

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Complete solution for conveying bulk materials such as shredded material, wood chips, wood pellets, granulate, etc. Aluminium angled conveyor belt including substructure Horizontal section: 2,500 mm (customizable) Inclined section: 5,000 mm (customizable) Bend angle: 35°, 40°, or 45° Infeed height: horizontal (customizable) Discharge height: individually adjustable Design: height-adjustable (movable) Conveyor belt width: 500 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt including cleats and corrugated sidewall Drive: 1.1 kW motor (adjustable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive, etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Corrugated sidewall: 50x25 mm T-50 cleats – 400 mm pitch 2-ply for exceptional transverse stability Permanently mounted overband magnetic separator: Permanent overband magnetic separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200 mm Magnetic area L: 700 mm, W: 250 mm Geared motor: 0.37 kW Iodpfji Igdfjx Aausar We always keep various systems of this type in stock. The delivery time for a customized system is currently approx. 2-3 weeks, depending on manufacturing requirements. Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop custom, individualized solutions and supply the associated systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 3 300 h, Funkcionalumas: visiškai funkcionalus, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Tri-axle semi-trailer chassis, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive Tyres 385/65 R22.5 Permissible gross weight 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Ijdexx Tigspfx Aaujar Load-dependent feed control including automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned lubrication strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs, opening/closing rear basket, folding/unfolding rear conveyor belt, disengaging travel drive) when engine is off 24 V electrical control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket Multimesh (mesh sizes between 30 - 280 mm, increments on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, with antimagnetic centre section Underslung conveyor: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water supply connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at the feed hopper (made of wear-resistant steel) on both sides for sidewall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic travel drive Scraper floor chain lubrication Neodymium overband magnet Frame for overband magnet Central lubrication system Engine compartment guard plate Lighting package: engine compartment and rear conveyor Watering system Delivery date according to agreement Available from 06/2026

Būklė: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 18 520 h, Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recycling, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; fully equipped with ABB frequency converter, Cooling unit Control panel Hopper Drive motors: 200 kW Iodpfewxmb Ejx Aausar Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible by appointment. Delivery time: immediately

Būklė: naujas, rida: 100 km, galia: 324 kW (440,52 AG), kuro tipas: dyzelinas, bendras svoris: 26 000 kg, ašių konfigūracija: 3 ašys, spalva: balta, pavaros tipas: automatinis, krovimo vietos ilgis: 8 900 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 1 050 mm, Gamybos metai: 2025, Įranga: ABS, autonominis šildytuvas, navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: geras (naudotas), "Rentec Dinosaurus 2600S" for Sale Manufacturer: Rentec Model: Dinosaurus 2600 S Equipped with hydraulic unit and control system installed in a container. Fitted with reconditioned rotors. Ijdovt Tptjpfx Aausar A discharge conveyor for the Rentec Dinosaurus 2600S is also in stock. For more detailed information, please refer to the PDF below.

Gamybos metai: 1997, būklė: labai geros būklės (naudotas), For sale, we have a block mould with the following specifications: - Block dimensions: 1300 x 1040 x 5300/4000 mm - VARIO - PLC control system: SIEMENS S7 - VACUUM system vacuum pumps by SIEMENS - Hydraulic pump for the hydraulic system by BOSCH After being purchased by our company, the machine underwent a thorough inspection, including disassembly of all internal panels and comprehensive cleaning of the internal steam and vacuum channels. The machine is in excellent technical condition and offers high performance. The offer also includes a complete set of documentation, comprising electrical, hydraulic, and pneumatic schematics as well as technical drawings. We also have other EPS (expanded polystyrene) production machinery for sale, such as: Ijdon Tn Hrepfx Aausar - ICI CALDAIE steam generator (2000kg/h) - 2x steam accumulators with capacities of 10,000 liters and 20,000 liters (RUTH'S tank) - 3x EPS block cutting lines - 2x block moulds - Pre-expander (high-capacity continuous pre-expander) It is also possible to purchase a complete production line (including installation, commissioning, and staff training).