Pildymo mašina

GAI 21116

Gamybos metai: 2000, būklė: geras (naudotas), Barberan Laminating Line For all inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum element length: approx. 600 mm Continuously adjustable speed from the brushing machine, maximum speed: 20 m/min. The line includes: - Tommassini automatic loader (not operational) - Top and bottom brushing machine - Pre-heating lamps for the top and bottom glue rollers Dcjdpfx Ansilqvre Hjh - PVAC glue applicator - Additional top and bottom drying lamps - Steel calender line for pressing - Additionally, the line is equipped with a purchased corona treatment unit for the upper surface (functional) – allows for single-side laminating with PP films

Būklė: naudotas, Gamybos metai: 2016, Panel saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control unit Os Labeling labeling unit with onboard graphic marking, including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Motorized rollers for side loading on lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic identification of disposable sacrificial panels based on thickness data stored in the machine Low stack stop Automatic side loading. Includes: stop grids, double photocell, control keypad, electrical pre-installation for two motorized infeed roller conveyors, and reinforcement with 4 rollers instead of fork slots in the infeed conveyor Intermediate roller conveyor Side infeed roller conveyor, dimensions 3800 x 2200 mm with motorized rollers (floor height 325 mm) Dead roller conveyor for longitudinal offcuts for corner systems, 4500 mm (total length 7295 mm) 3000 mm extension for dead roller conveyor to also handle cross-cut offcuts Long chute for manual transport of cross-cut pieces to the central dead roller conveyor Air flotation unloading table, 2050 x 850 mm, equipped with wheels on the front Air blower unit for up to 6 air flotation layers MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the crosswise axis; this device enables reduction of the minimum panel length for cross-cutting from 1830 mm to 1220 mm Automatic device for detecting saw shaft deflection on angled cuts (longitudinal and transverse), consisting of a sensor capturing deflection directly at the saw arbor and a device counting blade revolutions directly at the saw chuck Keypad for remote cycle start Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the crosswise axis Main saw blade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed 1–140 m/min with brushless motors Longitudinal pusher carriage speed 90 m/min Transversal pusher carriage speed 135 m/min Double pusher carriage: 6 clamps on the longitudinal slide + 10 clamps on the cross slide (8 fixed + 2 on the cross slide, Multi-Pusher system) Cutting system for thin panels Dcjdpfeuc Idxex An Heh

Būklė: beveik kaip naujas (naudotas), Inline folielasser en krimptunnel Merk: Kallfass Type: semi/automatische krimptunnel Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Frame: Staal Bereik: 1600 mm (band) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Elektrisch: 380V+N+E, 65 kW Dcodpfsg D Nv Tox An Hsh Conditie: In huidige staat, werkend

Būklė: geras (naudotas), The counterpressure technology of the MULTIMA product line is especially suitable for filling CO2-containing beverages such as beer, soft drinks, or mineral water. The integrated vacuum technology enables low-oxygen bottling and canning. Nominal capacity: up to 700 units/hour Dcedpfx Anjhx D U Tj Hjh Manual filling Stainless steel rotary lobe pump

Būklė: geras (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 100 mm, bendras plotis: 1 200 mm, bendras ilgis: 4 400 mm, įvesties srovės tipas: trifazis, bendras svoris: 1 800 kg, įėjimo įtampa: 400 V, darbinis slėgis: 8 juosta, įėjimo dažnis: 50 Hz, Automatic linear electro-pneumatic counter-pressure filling and capping line GAI MLE 661-BIER including rinser, infeed conveyor, and ENOS automatic labelling system for approximately 1,350 bottles per hour. The machine is configured for 33cl Longneck bottles and is fully operational. The machine remains powered, well-maintained, and in active production (availability by arrangement, with decommissioning planned by the end of 2025 at the latest). On-site inspection can be arranged by appointment. Dodjwx Hzxspfx An Hsch

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2018, STORK VS 24/8 Monoblock Bottling Machine after a general overhaul performed by the professional company Z.M. ROBAK. The machine is practically without signs of use; the protective film is still on the housing. Currently, the machine has been prepared for filling glass packaging – it was used for test filling of alcohol. Dcsdpeu Nhiqefx An Hoh Number of filling valves: 24 pcs (with light vacuum for still beverages) Number of capping heads: 8 (set up for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Suitable for bottles with the following dimensions (after adaptation to the specific format): – diameter: Ø 45 – Ø 110 mm – height: 105 – 400 mm – standard neck diameter: Ø 28 mm – neck diameter optionally changeable: Ø 18 – Ø 43 mm Machine dimensions: – width: 2,900 mm – height: 2,200 mm – depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – not used in production since modernization Condition: Machine practically without signs of use. The machine comes with original electrical documentation.

Būklė: labai geros būklės (naudotas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Djdohv Sttopfx An Hjch Loader

Būklė: naudotas, Gamintojas: Dreher Būklė: naudotas Atsargų numeris: 3175 Papildomos funkcijos Linija susideda iš: - Dreher alaus virimo sistema su 2 indais Tipas: KBA500 Pagaminimo metai: 2006 Katilas: 550 litrų Šildymas: 42 kW Valdymas: KBA basic - 3x Dreher fermentacijos talpos Tipas: GW500 Pagaminimo metai: 2006 Talpa: 520 litrų Su Dreher ZKV120 aušinimu - 3x Dreher / Brovarni dozavimo talpos Tipas: 500 L CCT Pagaminimo metai: 2017 Talpa: 500 litrų - 1x Dreher brite talpa Talpa: 1000 litrų - 6x Dreher Kombi talpos Tipas: KT500 Pagaminimo metai: 2006 Talpa: 500 litrų - 5x FIB alaus talpos Tipas: 70200503 Pagaminimo metai: 2022 Talpa: 540 litrų Pagalbinė įranga, įskaitant: Djdpeyzyy Hefx An Hjch - Gail 103 grūdų malūnas - Enotecnica Pillan srl F30 20x20 filtras - Serrco SW-150 aušinimo vandens talpa - Butelių plovimo stotis - Butelių užpildymo mašina - Kamščių uždėjimo aparatas - 45x 20 litrų talpos statinės - Darbo stalas - Dviguba plautuvė

Būklė: naudotas, Gamybos metai: 2013, Overview The Heuft InLine IR – High-Speed Empty Bottle Inspector stands out due to its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It is capable of performing all standard inspections (sidewall inspection, infeed inspection, finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). Additionally, it features a separate module for foreign bottle detection (height, contour, color). In 2016, it was overhauled and modified, including installation of a conveyor control system. Technical Data: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions Completely overhauled and modified in 2016 Features: Performs all standard inspections: sidewall, infeed, finish, base, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color) Dedpfx Aoukafron Hsch

Būklė: geras (naudotas), Código: 0253 Marca: LARI E LARI - ITALIA Modelo: FR 20 - TA - Norma CE Centro de trabajo para fresado y taladrado en madera, plástico o materiales compuestos, puertas de madera, marcos de ventanas - Norma CE Datos técnicos: Recorrido del eje X: 3250 mm Recorrido del eje Y con herramienta a 90°: 130 mm Recorrido del eje Z con herramienta a 0°: 290 mm Recorrido del eje Z con herramienta a 90°: 175 mm Velocidad de trabajo del eje X: 40 m/min Velocidad de trabajo del eje Y: 30 m/min Velocidad de trabajo del eje Z: 30 m/min Dcjdpfxjx A Hdxj An Hoh Unidad de taladrado y colocación de bisagras: Machos/Hembras Control de velocidad por inversor Sonda Portaherramientas tipo ER 25 Potencia del husillo eléctrico para taladrado de cabeza anuba: 2,2 kW Inclinación de la cabeza anuba: -10° a +90° Husillo eléctrico para fresado: 2,7 Hp a 18.000 rpm Portapinzas ER 32 Velocidad variable mediante inversor Inclinación de 0° a 90° para trabajos tanto verticales como horizontales Ordenador de máquina: control numérico - sistema operativo Windows XP - monitor en color - teclado alfanumérico - puerto USB - interpolación Mesa de trabajo con 3 mordazas deslizantes para fijación de piezas Potencia total instalada: 12 kW Diámetro de boca de aspiración: 120 mm Aire comprimido: 7-8 bar Dimensiones generales para el transporte: 4100 x 1500 x 2100 mm (alto) Peso de la máquina: 1.400 kg Peso del cuadro eléctrico: 250 kg