Universalios cilindrinės šlifavimo staklės

Fritz Studer AG RHU 500

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Iodpfx Ajw T Sc Njf Ioal Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MGB1320E, centro aukštis: 180 mm, ruošinio svoris (maks.): 100 kg, šlifavimo ilgis: 500 mm, šlifavimo disko skersmuo: 400 mm, bendras plotis: 14 150 mm, bendras ilgis: 18 000 mm, bendras aukštis: 14 750 mm, šlifavimo skersmuo: 320 mm, ruošinio ilgis tarp centrų: 350 mm, šlifavimo ratuko plotis: 50 mm, veleno greitis (maks.): 3 000 aps./min, padavimo ilgis X ašis: 500 mm, padavimo ilgis Z ašis: 150 mm, X ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 1 m/min, bendras svoris: 2 100 kg, ruošinio veleno greitis (maks.): 400 aps./min, Įranga: sūkių greitis be galo kintamas, Beijing No.2 Machine Tool Works (BEIER) Semi-automatic High-speed Cylindrical Grinder MBS1320E Online production equipment; machine testing available; roundness within 0.001 mm Ijdpfx Ajtr Azksf Ijal Manufacturer: BEIER MACHINE TOOL WORKS CO LTD

Sąlyga: naudotas, Gamybos metai: 2017, As new condition Comprising: 1 piece measuring case 12-20mm Isdpfx Asvvxvdjf Ijal Comprising: 1 piece measuring case 20-50mm Comprising: 1 piece measuring case 50-100mm

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Iajdpfx Afsqt Dmys Ijl Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Sukimos ilgis: 3 000 mm Sukimos skersmuo virš planšlito: 520 mm X ašies eiga: 600 mm Y ašies eiga: 150 mm Isdpfexpfd Dox Af Ijal Z ašies eiga: 3 150 mm Sukimos skersmuo: 520 mm Sukimos ilgis: 3 000 mm Valdymas: SIN 840 D Siemens Z ašis: 3 150 mm Z ašies pastūma: 1 - 40 000 mm/min Greitaeiga Z ašyje: 40,00 m/min X ašis: 600 mm X ašies pastūma: 1 - 30 000 mm/min Greitaeiga X ašyje: 30,00 m/min Pagrindinis velenas S1 Veleno apsisukimų diapazonas: 1 - 3 300 aps./min Variklio galia prie 100 % apkrovos: 29,00 kW Veleno galvutė DIN 55026 - dydis A11 Priekinio guolio veleno skersmuo: 160 mm Veleno skylė: 115 mm C ašis: 360 x 0,001° Frezavimo velenas S2 Įrankio tvirtinimas: Capto C6 Apsisukimų diapazonas (be pakopų): 1 - 6 000 aps./min Y ašis: -100 / +150 mm B ašis: -110 / +110° Įrankių sandėlis su 100 pozicijų Bendras galios poreikis: 145 kW Staklių svoris apie 24 t

Gamybos metai: 1969, Sąlyga: paruoštas naudoti (naudotas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2100 mm, width: 1400 mm, height: 950 mm, weight: 1.6 t, complete with documentation; on-site inspection is possible. Iajdpfx Afjqzkdmj Iel

Sąlyga: naujas, Machine in stock and immediately available Double Mitre Metal Bandsaw S 255 DG Cutting capacity round / square 90°: 255 mm / 210 x 210 mm Cutting capacity flat 90°: 310 x 210 mm Cutting capacity round / square 45°, right: 220 mm / 210 x 210 mm Cutting capacity flat 45°, right: 220 x 200 mm Cutting capacity round / square 45°, left: 230 mm / 200 x 200 mm Cutting capacity flat 45°, left: 230 x 200 mm Cutting capacity round / square 60°, right: 135 mm / 135 x 135 mm Cutting capacity flat 60°, right: 135 x 135 mm Saw blade dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor output S6 40%: 2.2 kW Working height: 930 mm Features: - Double mitre band saw with swiveling saw bow from left -45° to right +60° - Ideally suited for cutting pipes, profile materials as well as solid material made of stainless steel, iron, etc. in commercial applications - Large, heavy-duty cast saw arm for low-vibration operation - Two band speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vice for easy and fast clamping of workpieces - Precise, adjustable saw band guides for optimal cutting results - CE/IEC certified, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides Iasdjd R Sipopfx Af Iel - Vice with quick clamping device - Integrated coolant system - Hydraulic bow lowering - Motor protection switch - Automatic cut-off - Base frame

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, bendras ilgis: 620 mm, Mechanics: All wear parts of the machine are replaced, including the feed spindle on the X-axis. All assemblies are restored to a like-new condition. After the overhaul, the machine is comparable to a new unit. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of each table and assembly is restored, both the X and Z-axis guideways are hand-scraped and restored to like-new condition. Upon completion, the machine receives a measurement protocol according to the manufacturer's specifications. Painting: After the machine's geometry is restored, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also fully overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Specifications: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine Weight and Dimensions: 2,500 kg // 2340 x 1445 x 1900 mm Machine Equipment (Standard): 1x Workpiece headstock MK5 1x Operator panel 1x Mount for internal grinding spindle 1x Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1x Hydraulic unit Optional: - 2-axis digital readout system - Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds possible upon clarification of technical details) Isdpfxjurw Uys Af Ioal - Separate low speed for part alignment

Sąlyga: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special Equipment Isdpfx Ast Hwzisf Ieal • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Sąlyga: naujas, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machines category, distinguished by its robust construction and long, supported guideways. Its heavy machine bed made of high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate accurate infeed. This setup is complemented by a standard position indicator with linear scales, allowing for straightforward monitoring of actual values. The machine’s versatility for internal and external cylindrical grinding, as well as taper grinding, is further enhanced by the hydraulically adjustable workhead. Buyers receive a comprehensive set of standard accessories, including an internal grinding attachment and a work lamp. Experience superior performance and precision with the RSM 500 A – request a quote now to optimize your grinding projects! Iedponcdx Nsfx Af Ieal