Liejimo mašinų priedai

FRECH Z20/120C

Sąlyga: naudotas, Gamybos metai: 1992, Uždarymo jėga 600 kN Tvirtinimo plokštė 460x460 mm Atstumas tarp kolonų 300x300 mm Mašinos svoris apie 4,5 t Uždarymo eiga 230 mm Išstūmimo jėga 40 kN Išstūmimo eiga 70 mm Formos aukštis 120-350 mm Kolonų skersmuo 56 mm Liejimo jėga 55 kN Liejimo eiga 130 mm Liejimo stūmoklio skersmuo 45, 50, 55 mm Dujdofrvzvepfx Ab Sjl Liejimo tūris (DIN 24480) 76, 121, 165 cm² Specifinis liejimo slėgis 345, 280, 231 kp/cm² Atitinkamas dalijimosi paviršius 174, 214, 260 cm² Atbulinės eigos eiga 150 mm Naudota liejimo mašina DAW 50 su SBC2 valdymu, skirta cinko lydiniams. Galima įsigyti iš naudotų mašinų sandėlio. Mašina komplektuojama su Rauch MO50E elektrine krosnimi ir naudotu Oskar Frech 401 pneumatiniu purkštuvu. Gamintojas rekomenduoja atlikti kapitalinį remontą specializuotame servise. Remonto apimtis bus suderinta pagal susitarimą.

Sąlyga: naujas, Gamybos metai: 2026, The EVP-RA 350 vibratory finishing machine from ERBA features a rising processing bowl floor with integrated parts/media separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the integrated drop-off step. Discharge and separation are performed via the integrated flap (manual or pneumatic actuation). Upon request, the machine can be fitted with reinforced suspension and a higher-performance motor for heavier loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines thanks to its lateral discharge system. The machine is also available with a fully-automatic PLC control system (optional). Duodpfx Ajn Ut Ureb Sel ERBA vibratory finishing systems are renowned for their durability and longevity, which is largely attributed to the hot-cast polyurethane lining inside the processing bowl. Technical data: - Gross volume: 385 L - Working channel width: 340 mm - Imbalance motor power: 2.2 kW - Speed: 1,400 rpm - Internal bowl diameter: 1,200 mm All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are available separately at additional cost. If you are interested, we look forward to hearing from you. We would be pleased to advise you in a non-binding manner. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). Initially, you will receive a non-binding offer, which also includes information on our general terms and conditions, imprint, and cancellation policy, before any purchase or contract is concluded.

Sąlyga: naujas, Gamybos metai: 2026, The ERBA EVP-RA 550 vibratory finishing machine features a flat process bowl base with integrated separation, specifically designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out via the integrated flap (manual/pneumatic operation). For increased load capacities, reinforced suspension and a more powerful motor can be installed upon request. The motor speed can be continuously adjusted using a frequency converter (optional). The EVP-A 550 can be linked with other machines due to its side discharge configuration. The system can be equipped with fully automated PLC control (optional). ERBA vibratory finishing systems are characterized by their durability and longevity, supported by the hot-cast polyurethane lining of the process bowl. Dodpfsn Ut Ugex Ab Ssul Technical data: - Gross volume: 550 L - Process channel width: 390 mm - Imbalance motor output: 4.0 kW - Rotational speed: 1,400 rpm - Inner diameter of the bowl: 1,400 mm All prices are net, subject to the statutory VAT applicable at the time of purchase, and plus shipping costs. The images may show the system including accessories, which are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. Our consultation is non-binding and at your disposal. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contract negotiations take place via telecommunications (e-mail, telephone, messaging portal). Our initial offer is non-binding and will include our general terms and conditions with company information and cancellation policy before any purchase/contract conclusion takes place.

Sąlyga: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme Dedpfx Abjiu Smbo Soul 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package

Sąlyga: naujas, Gamybos metai: 2026, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 L Description: Duodpfx Aen Ut T Asb Sjl The ERBA EVP 1500 vibratory finishing machine features a flat work container base without separation. It is ideally suited for larger and heavier workpieces. Emptying or separation is carried out via bottom discharge (manual/pneumatic). On request, the machine can be equipped with reinforced suspension and a more powerful motor for higher loads. The motor speed can be continuously adjusted via frequency converter (optional). The system can be equipped with a fully automatic PLC control (optional). ERBA vibratory finishing machines are known for their durability and longevity, which is also due to the hot-cast polyurethane lining of the work container. The stated price is net, plus the currently applicable statutory VAT and freight costs. Accessories shown in photos may be optional and incur additional costs. The price refers to the basic machine. If interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include information about our general terms and conditions, legal notice, and right of withdrawal before a purchase/contract is concluded.

Sąlyga: naudotas, Gamybos metai: 1994, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Corresponding parting surface: 174, 214, 260 cm² Ejector withdraw stroke: 150 mm Used machine: DAW 50 as a basis for a complete overhaul, without control cabinet, furnace, or furnace cabinet. Djdpfx Abetuxmys Seul A general overhaul can be carried out at the manufacturer’s refurbishment facility. The scope of the overhaul can be agreed upon on an individual basis.

Sąlyga: geras (naudotas), Abrasive media, ceramic abrasive media, polishing media for vibratory finishing machines, mass finishing plants, vibratory tub, rotary vibrators, Trowal systems, continuous flow vibrators, ceramic abrasive media Dsdpjrxw Ezefx Ab Sjul - Manufacturer: Walther Trowal, ceramic abrasive media type MAC 10x15 A/C TRI - Grit: see photos - Price/lot: complete package - Transport dimensions: 1200 x 800 x H600 mm - Total weight: 471 kg

Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, tarpas tarp stulpų: 579 mm, liejimo jėga: 350 N, eigos ilgis: 420 mm, kolonos skersmuo: 125 mm, bendras svoris: 12 000 kg, galia: 22 kW (29,91 AG), Schließkraft: 350 Tonnen Zuganker-Ø: 125 mm Duodpfev D Dwpsx Ab Sol Holmzwischenraum: 579 x 579 mm Werkzeugstärke (min. - max.): 300 - 700 mm Auswerferhub: 420 mm Bewegliche Aufspannplatte: 940 x 940 mm Spritzposition: -125 mm Anschlussleistung: 22 kW Maschinengewicht: 11.974 kg Verkauft mit Entgratpresse und Manipulator.