Sunkiasvoris transportavimo vežimėlis 1200 kg

Franke TA-MC

Būklė: naudotas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtainsider low loader, low-bed trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight rating: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Tarpaulin frame with EDSCHA roof system Fedpot N Antjfx An Hopn - Tarpaulin frame designed for easy removal (can also be used with the frame removed and sliding tarp advanced) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle is a lift axle - Drawbar – telescopic, adjustable in several stages - Very robust lashing eyes on outer frame and vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge €2,000 net) The vehicle was purchased new by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Būklė: naujas, Saw blade diameter 355 mm Fpodeupw Tkjpfx An Hon Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 120 x 106 mm Cutting capacity at 90 degrees: flat 102 x 197 mm Saw blade arbor diameter 25.4 mm Supply voltage 230 V Total power requirement 2.3 kW Machine weight approx. 28 kg Dimensions (LxWxH): 0.6 x 0.35 x 0.45 m Machine for cutting pipes and profiles made of steel, light metal, plastic, non-ferrous metal, and composite materials.

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Fedew D Aq Topfx An Hepn Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Būklė: geras (naudotas), Gamybos metai: 2011, From company closure: Berg und Schmid VKS 370 HA Year of manufacture: 2011 Semi-automatic 4-meter roller conveyors left and right Left stop with digital length measurement system, adjustable via handwheel Cutting capacity with 370 mm saw blade: Round: 120 mm – Square: 100 mm – Rectangle: 180x100 mm at 90° At 60°: Round: 110 mm – Square: 90 mm – Rectangle: 90x100 mm Mitre cuts: left up to 60°, right up to 45° Saw blade bore: 40 mm Saw blade speed: 15–70 rpm 380 Volt Coolant pump Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Fast lowering to start of material or direct cutting in series mode 4. Saw band off 5. Raise frame just above material 6. Open clamping vice Fodewa Ecqjpfx An Hepn

Būklė: labai geros būklės (naudotas), 3x3m Motorized Welding Column with Movement Control via Push-Button Panel. Effective Working Capacity: 3x3m Wire Spool Dispenser Lincoln Idealarc DC-600 Submerged Arc Welding Unit with Torch and Flux Holder, plus Lincoln NA-3N Panel for Amps and Volts Adjustment. Submerged Arc Duty Cycle: 600 Amps at 100% Welding Equipment: Idealarc DC600 220/380/440 3/50/60 Input Voltage: 220/380/440V Input Current: 116/67/58A Input Frequency: 50/60 Hz Input Phase: 3 Input Power: 220/380/440V/3/50/60 Output Range: CV: 70A/13V - 780A/44V CC: 90A/24V - 780A/44V Rated Output: 600A/44V/100% 680A/44V/60% Fpedpju Afwlsfx An Hen

Būklė: geras (naudotas), various counter bearings (support brackets), rollers 5-way adjustable Fpedpfx Ajl Dwnljn Hsn for transverse and longitudinal rotation to relieve, for example, welding positioners or for transporting pipes different models available height adjustment either in steps or stepless various heights available the supports themselves have a load capacity of up to 8 tonnes Prices from €480 to €850

Būklė: naudotas, Gamybos metai: 2004, bendras ilgis: 6 240 mm, Traktorius Fsdpfx Ansxyalko Hspn Rofan TPR-10 Variklio tipas: dyzelinis Metai: 2004

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2 t Fodpfjvx E Ilsx An Hspn Reeving 4/1 Lifting height 6 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, The used DIAMOND SJ 22 2-axis CNC lathe is a fast, medium-sized slant bed lathe with box ways, featuring FANUC 0i-TC CNC control, manufactured in 2007, CE compliant. Main features: - X-axis travel: 280 mm - Z-axis travel: 360 mm - Bar capacity: 45 mm - Spindle: max. rotational speed 6,000 rpm - Spindle motor power: 7.5 kW - Turret with 12 stations Fodpet N Upvjfx An Hjpn Standard equipment includes hydraulic tailstock with programmable quill, hinged belt-type chip conveyor, set of tool holders, 250 mm 3-jaw power chuck with corresponding jaws, and operation & maintenance manuals.

Būklė: naujas, Load capacity: 30,000 kg Own weight: 429 kg Dimensions: 2,450 mm Height: 535 mm Width: 265 mm Maximum length: 4,250 mm Extendable to (+ 800 JP): 6,200 mm Extendable to (+ 2 x 800 JP): 8,500 mm Warranty: 12 months Shackles: 4 + 4 pcs Extensions (1 set each, 4 pcs.): 800 JP Attachment beam for straps: 800 LKP Additional lifting eye: 800 LK Lifting eye for wide straps: 800 NKL Alignment plate: 800 TL Reeler: 800 AR 7 Storage rack: 800 ST 2 Fsdpfed R Hvyox An Hjpn XLift Lifting Beam - The No. 1 Choice for All Applications Various trades and industries face different lifting challenges. For this reason, universal lifting beams are naturally offered for a range of load capacities. Our range spans from lifting beams with a 3-ton load capacity up to lifting devices with capacities up to 50 tons. The beams are designed to keep their own weight as low as possible without compromising stability or operational safety. Each model is easy to handle and, thanks to small hole intervals, can cover a wide range of hook-in lengths. Universal lifting beams are particularly suited for a wide variety of lifting tasks, as they can be used as beam spreaders, spreader beams, or 4-point lifting beams. The cross-shaped arrangement of the beams, which gives the traverses their name, ensures that the vertical surfaces of the load are subjected to minimal pressure. Adjustment of the individual hole spacings is effortless even for inexperienced users, making these units stand out for exceptional user-friendliness. When used as an X-beam, the design allows for a greater distance between the suspended load and chains or slings under load. In addition, you can optionally purchase perfectly matched supplementary products from our XLift series, such as lifting accessories.