Elektroninis suklys

FISCHER MW 10,6/8

Sąlyga: naudotas, Gamybos metai: 2020, Technical Details: Swing Diameter: 670 mm Turning Length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Maximum Swing Over Bed Cover: 700 mm Travel Paths Turret No. 1 (Milling Spindle) x/y/z: 495 / ± 150 / 1562(+164) mm B-Axis Rotation: -30° / +210° Rapid Traverse Turret 1 (Milling Head) x/y/z: 40/40/40 m/min Milling Spindle Speed: 12,000 rpm Drive Power - Milling Spindle: 20.2/18.8 kW Milling Spindle Torque: 120 / 44 Nm Tool Interface Milling Spindle: Coromant Capto C6 Tool Magazine for Milling Spindle (Turret 1): 76 Tool Change Time Tool/Tool Milling Spindle: 1.25 s Spindle 1 Speed: 3,000 rpm Spindle 1 Power: 36 / 30 / 25 kW C-Axis Spindle 1: 0.001° Bar Capacity Spindle 1: 102 mm Spindle 2 Speed: 4,000 rpm Spindle 2 Power: 26 / 22 / 15 kW C-Axis Spindle 2: 0.001° Bar Capacity Spindle 2: 80 mm Space Requirement approx.: 7.8 x 3.6 x 2.9 m Linear Glass Scales on Axes: X, Y Programmable Steady Rest: KLU-A530 & SLU-X3.2 Accessories: Chip Conveyor Tool Measurement Spindle Load Monitor Air Blow System Air Blow System via ICS System to the Tool Spindle 1 Power Chuck Kitagawa 250 (B 210) mm Spindle 2 Power Chuck Kitagawa 250 (B 210) mm Interface for Internal Coolant Supply 70 bar Tailstock Specification for Sub Spindle Pjdpfewl Ag Dex Afwsrd Workpiece Measurement with Renishaw OMP60 Probe Detachable Handwheel Workpiece and Total Counter Three-Color Signal Lamp Robot Interface Matris Robot System R-2000iC/165F Automatic Door Rotoclear Viewing Window Fast Clamping Cycles Program Restart Four-Color Signal Lamp Ethernet I/P Interface Manual Tool Measuring Arm Automatic Door Oil Mist Separator Oil Skimmer Spindle Probe for Workpiece Measurement External Air Blow System for Sub Spindle Spindle 1 Coolant Nozzle Spindle 2 Coolant Nozzle Coolant Gun Internal Coolant Supply 70 bar with Knoll Filtration Very high-quality CNC turning-milling center equipped with sub spindle, which can also be used with tailstock function. The machine has an automatic door and Matris robot system type R-2000iC/165F.

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1998, mašinos/transporto priemonės numeris: 2183, X ašies eiga: 500 mm, Y ašies eiga: 300 mm, veleno greitis (maks.): 60 000 aps./min, veleno greitis (min.): 9 000 aps./min, ruošinio svoris (maks.): 300 kg, bendras aukštis: 3 250 mm, X ašies padavimo greitis: 2 000 m/min, Y ašies padavimo greitis: 2 000 m/min, stalo plotis: 380 mm, stalo ilgis: 600 mm, stalo apkrova: 300 kg, bendras svoris: 4 500 kg, W ašies eiga: 450 mm, Įranga: dokumentacija / vadovas, THIS MACHINE IS SOLD EXCLUSIVELY WITHIN THE EU - THANK YOU FOR YOUR UNDERSTANDING! Item type: CNC Coordinate Grinding Machine Manufacturer: HAUSER Model: S35-400 Year of manufacture: 1998 Machine number: 2183 Condition: According to the previous owner and a Hauser specialist, the machine is in good condition Delivery terms: Free on truck, loaded Availability: Immediately (by arrangement) Location: Magdeburg Technical Data: - Control: GE Fanuc Series 16-M - Tool holder: Collets EX 19 or grinding arbors E19 Psdpfxowakqyo Afwsrd - Travel paths X / Y / W axes: 500 / 300 / 450 mm - Feed rate X & Y axes: 0 – 2000 mm/min - Approximate feed rate W axis: 900 mm/min - Table dimensions: 600 x 380 mm - Max. table load: 300 kg - Grinding spindle speed, stepless: 9,000 – 60,000 rpm - Z-axis stroke speed, stepless: 0.5 – 14,000 mm/min - Fire extinguishing system - Further technical data – see images Scope of delivery: - Grinding motor 60S (9,000 – 60,000 rpm) – see separate images - Extraction system - Coolant device - Dressing turbine - Available manuals - The clamping devices shown in the pictures and the currently installed grinding motor are NOT included! Dimensions & Weights: - Installation dimensions (L x W x H) approx.: 4250 x 4000 x 3250 mm - Weight approx.: 4500 kg Should you have any questions or wish to arrange a viewing, please feel free to contact us. Additional notes: - The tool changer is not functional – according to the previous owner, it was never needed! - Upon request, we can offer transport to the destination. - The quoted price is net, plus VAT. - The goods are sold with exclusion of any warranty! - Sale is made exclusively to businesses! - Technical data without guarantee. - Subject to prior sale.

Sąlyga: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 13639, Heidenhain Steuerung Verfahrwege: X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 U/min Antriebsleistung – Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorn im Lager: 70 mm Erweiterter Werkzeugwechsler: 100 Plätze Rundschwenktisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbar C-Achse: 360° max. Tischbelastung ca. 1.000 kg max. Werkzeugdurchmesser: 80 mm max. Werkzeugdurchmesser bei freiem Nebenfach: 125 mm max. Werkzeuglänge: 300 mm max. Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X / Y / Z): 30 m/min Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Pjdpfx Aeinh Rqjfwsrd Sonstige Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Sąlyga: naudotas, Technical Details: Table diameter: 4,500 mm Faceplate diameter: 4,500 mm Operating hours: 0 h Swing diameter: 5,000 mm Turning diameter: 5,000 mm Maximum workpiece height: 2,500 mm Control: Sinumerik 840D SL X-axis: 300 mm ram slide travel X-axis: 2,850 mm ram travel X-axis: 2,850 mm working area without tool X-axis: 5,000 mm with tool changer W-axis: 1,800 mm cross rail travel Tool stations: 12 Tool holder: HSK 100 (spindle) Workpiece weight: 100 t Table speed: 1 – 50 rpm T-slots: 8 (36 H12) Ram milling speed: 4,000 rpm Rapid traverse in X and Z axes: 8,000 mm/min Podeu Ix H Dopfx Afwerd Torque (milling): 100,000 Nm Torque (turning): 200,000 Nm Total power requirement: 80 (2x40) kW Machine weight approx.: 140 t Machine dimensions (LxWxH): approx. 11.5 x 6.6 x 8.4 m CNC Vertical Turning Lathe – NEW (Photos show a demonstration machine) Applications: Turning, e.g. external longitudinal turning, internal and external face turning, and profile processing. Grooving operations such as internal and external grooving Displacement, including short and deep-hole drilling Milling: plan, corner, profile, and T-slot milling Thread cutting Also suitable for roughing and end finishing operations. The machine bed is designed as a welded construction to absorb extreme cutting forces. The table is made of high-strength Meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Additionally, the table features hydrodynamic support for the workpiece. Additional features: - Automatic tool changer - Chuck (8 pcs. with power chuck spindle and hardened jaws) - Includes 40 bar coolant system with filter unit - ATOS and Dropsa hydraulic and lubrication equipment - Axis measurement system by Heidenhain - Renishaw - NEW – with warranty & service from WMW AG

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Maks. tvirtinimo skersmuo: 20 mm, maks. ruošinio ilgis: 205 mm (GB tipas), 45 mm (NGB tipas), paėmimo veleno skersmuo: 20 mm, paėmimo veleno pratekėjimo skylė: 21 mm, maks. paėmimo veleno apsukos: 9000/min, pagrindinio veleno variklio galia: 2,2 kW (nepertraukiamai)/3,7 kW (10 min. / 25% ED), paėmimo veleno variklio galia: 0,55 kW (nepertraukiamai)/1,1 kW (15 min. / 40% ED), pavaromų įrankių talpa: maks. 6000/min, įrankio variklio galia: 1 kW (nepertraukiamai)/1,2 kW (5 min. / 30% ED), valdymas: Fanuc 0i-TD, prijungimo galia: 3,74 kVA, triukšmo lygis: 74 dB(A), ilgis: 2070 mm, plotis: 1177 mm, aukštis: 1760 mm, svoris: 1700 kg. Su strypų padavėju iki 3200 mm ilgio strypams ir automatiniu strypų padavimo žurnalu strypams, kurių skersmuo: 2–20 mm. Galima apžiūrėti vietoje. Prsdow U T Trepfx Afwod

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 500 mm, DMG CTX Beta 1250 TC 2009 - Siemens Sinumerik 840D SL Ergo Line control with ShopTurn - Machine operating hours: 22,470 - Spindle operating hours: 4,550 - Capto C6 - 5-axis simultaneous machining - Gear hobbing - Max milling spindle speed: 12,000 RPM - Max turning spindle speed: 5,000 RPM - Max workpiece diameter: 500 mm - Max turning length: 1,250 mm - Through-spindle bore (lathe spindle): 104 mm - Forkardt chuck type 3QLC 315-88 Prsdov N Hc Sspfx Afwjd - Tool magazine with 24 positions - Tailstock - Marposs 3D workpiece probe type E86 - B-axis +/- 110 degrees - Through-spindle coolant system 80 Bar - Automatic doors - Chip conveyor - Parts discharge system with conveyor belt for small parts - Oil mist extractor - Total machine weight: 10T - Complete service history - Loading included in the price The machine is ready for operation and in full working condition. Test run possible. For more information, please contact by phone or email.

Sąlyga: naudotas, Gamybos metai: 2004, veikimo valandos: 17 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 77203, X ašies eiga: 7 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 250 mm, greitas poslinkis X ašimi: 20 000 m/min, greitas poslinkis Y ašis: 20 000 m/min, greitasis eiga Z ašyje: 10 000 m/min, X ašies padavimo greitis: 20 000 m/min, Y ašies padavimo greitis: 20 000 m/min, padavimo greitis Z ašis: 10 000 m/min, veleno greitis (maks.): 4 500 aps./min, stalo ilgis: 7 000 mm, stalo plotis: 1 500 mm, aušinimo skysčio tiekimas: 15 juosta, ašies variklio galia: 37 W, Įranga: dokumentacija / vadovas, Priključki Pedpfewu R R Nox Afwerd Avtomatska rezkalna glava (0,001 stopinje v obeh ravninah) Hlajenje skozi vreteno 60-postajni avtomatski menjalec orodij (ATC) Transportni trak za odrezke Renishaw RMP60 sondiranje obdelovancev Talne plošče 7000 x 1500 mm Rotacijska miza 1200 x 1200 mm (5 t) Dodatna ročna rezkalna glava

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2008, YEAR: 2008 MAXIMUM RAM FORCE: 2,000 tons SLIDE STROKE: 1,500 mm TABLE DIMENSIONS: 5,000 x 2,380 mm BLANKHOLDER FORCE (UPPER): 300 tons CUSHION STROKE (RAM): 200 mm Pedpfjvm Eixjx Afwerd FAST STROKE SPEED: 220 mm/sec CUSHION CAPACITY: 600 tons CUSHION STROKE (SLIDE): 400 mm OVERALL HEIGHT: 9,145 mm DISTANCE BETWEEN UPRIGHTS (FRONT OPENING): 5,000 mm TOTAL WEIGHT: N/A

Sąlyga: naudotas, Gamybos metai: 2001, Stalo ilgis 600 mm Prsdowmwwyjpfx Afwsd Stalo plotis 380 mm Valdymas: FANUC 16i-M Išilginis eiga 500 mm Skersinė eiga 300 mm Didžiausias šlifavimo skersmuo 230 mm Koordinatinis šlifavimo staklės | HAUSER - S35-400 Įrenginys yra prižiūrėtos būklės. Atkreipkite dėmesį, kad techniniai duomenys buvo pridėti remiantis panašiomis staklėmis. Vaizdo įrašą iš gamyklos vietos atsiųsime paprašius. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Žymos: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35

Sąlyga: naudotas, Gamybos metai: 2008, x-axis travel: 12,000 mm y-axis travel: 1,500 mm z-axis travel: 3,500 mm Feed rate: 20,000 mm/min Spindle mount: DIN 69871 A50 / HSK63 Speed range: 35–6,000 rpm Table load capacity: 30,000 kg Operating hours: 26,658 h Control: Siemens 840 Digital Milling head: Automatic milling head, 45°, Internal coolant supply: 60 bar Coolant system: JUMA+GAIN, 200 L capacity Chip conveyor: included Podjxvdunopfx Afwsrd Tool changer: 80 positions Total power requirement: 209 kW Machine weight: approx. 75 t - Automatic 45° head, 6,000 rpm, with 0.001°/0.001° positioning (DIN69871 A50) - Rotary head (5 axes), 18,000 rpm, 23 kW, DIN69893 HSK A63 - Direct output head, 6,000 rpm, DIN 69871 A50 - Extension head 500 mm, 2,000 rpm, DIN 69871 A50 - Tool holding heads for turning with Capto 6 clamping systems - Automatic head changer (AHC) - AITEK ACH head changing station for automatic exchange of 4 heads - Rotary table with linear drive mod. ZA/B-2000 Table longitudinal traverse (B): 2,000 mm Table rotation (B): 0.001° Table surface: 2,500 x 2,500 mm Max. speed: 10,000 mm/min Hydrostatic system: included Table load capacity (max.): 30,000 kg - Rotary-milling table BOST Ø 2,500 mm Chuck size: Ø 2,500 mm Chuck longitudinal travel: 1,500 mm Table load capacity (max.): 25 t Spindle drive power: 2 x 37 kW Rotational speed (max.): 200 rpm Milling power (max.): 55 kW Rotary-milling axis: included Linear travel speed: 15,000 mm/min - BLUM LASER MICRO A5 - Probe M&H PS 20 with DIN 69871 A50 - Probe M&H PS 20.00 with DIN 69893 HSK A63