Konsolinė lentynaFischer
Konsolinė lentyna
Fischer
Gamybos metai
2020
Būklė
Naudotas
Vieta
Nattheim 

Duomenys apie mašiną
Kaina ir vieta
- Vieta:
- Daimlerstr. 21, 89564 Nattheim, DE

Skambinti
Pasiūlymo informacija
- Skelbimo ID:
- A22022018
- Nuorodos numeris:
- NL-K-26001
- Atnaujinimas:
- paskutinį kartą atnaujinta 30.05.2026
aprašymas
FISCHER – Cantilever Racking System for Indoor Installation
The racking must not be clad or modified on-site without consulting FISCHER.
Technical specifications according to performance description
Rsdpezab Rcsfx Adzscb
Rack No. 1 – single-sided (cantilever arms bolted)
Number of racks
The following information refers to 1 rack:
- Quantity: 1 pc
- Number of uprights: 3 pcs
- Racking length (center distance): 2,500 mm
- Upright spacing: 2x 1,250 mm
- Upright height (hole spacing 100 mm): approx. 2,500 mm
- Top storage level: 2,200 mm
- Base length 1st/2nd side: 2,000 / 0 mm
- Cantilever arm length (total incl. end stops): 2,000 mm
- Cantilever arms 1st/2nd side: 4 / 0 pcs
- Desired load capacity per cantilever arm: 500 kg
- Load capacity per upright side (without considering the base): 2,000 kg
- Max. floor load: 0.11 kN/cm²
- Shipping weight per rack: 607 kg
- Color of uprights: flame red, similar to RAL 3000
- Color of cantilever arms: flame red, similar to RAL 3000
- 1 spray can included
Profile thickness is rated for 100% utilization of the racking capacity.
Seismic zone not identified; certified static calculations available for an extra charge.
Information on static calculation:
Important notice regarding the structural calculation of the storage system:
Calculations are based on the requirements of the Eurocode (DIN EN 1991-1-1, DIN EN 1991-3, and DIN EN 1991-1-4) and the relevant national annexes (NA) of the country of installation. As storage systems are typically installed in urban or industrial areas, applicable requirements (e.g., terrain category III and IV in Germany) are considered in the calculation.
Important notice regarding building permits:
Storage installations may require approval according to the respective state building regulations. The customer is obliged, when placing an order with Fischer, to obtain all required public permits for the racking installation. If the permit is not granted, revoked, or withdrawn, the contractor is not liable. For assembly carried out by Fischer, it is assumed that a valid building permit is present at the time of installation. Any required statically verifiable calculations for the building application will be supplied for a fee; please contact us.
Cantilever rack 1 pc: €1,500.00
Base rounding as a safety element, 3 pcs: €13.50 per base and side
Storage location: Customer site
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
The racking must not be clad or modified on-site without consulting FISCHER.
Technical specifications according to performance description
Rsdpezab Rcsfx Adzscb
Rack No. 1 – single-sided (cantilever arms bolted)
Number of racks
The following information refers to 1 rack:
- Quantity: 1 pc
- Number of uprights: 3 pcs
- Racking length (center distance): 2,500 mm
- Upright spacing: 2x 1,250 mm
- Upright height (hole spacing 100 mm): approx. 2,500 mm
- Top storage level: 2,200 mm
- Base length 1st/2nd side: 2,000 / 0 mm
- Cantilever arm length (total incl. end stops): 2,000 mm
- Cantilever arms 1st/2nd side: 4 / 0 pcs
- Desired load capacity per cantilever arm: 500 kg
- Load capacity per upright side (without considering the base): 2,000 kg
- Max. floor load: 0.11 kN/cm²
- Shipping weight per rack: 607 kg
- Color of uprights: flame red, similar to RAL 3000
- Color of cantilever arms: flame red, similar to RAL 3000
- 1 spray can included
Profile thickness is rated for 100% utilization of the racking capacity.
Seismic zone not identified; certified static calculations available for an extra charge.
Information on static calculation:
Important notice regarding the structural calculation of the storage system:
Calculations are based on the requirements of the Eurocode (DIN EN 1991-1-1, DIN EN 1991-3, and DIN EN 1991-1-4) and the relevant national annexes (NA) of the country of installation. As storage systems are typically installed in urban or industrial areas, applicable requirements (e.g., terrain category III and IV in Germany) are considered in the calculation.
Important notice regarding building permits:
Storage installations may require approval according to the respective state building regulations. The customer is obliged, when placing an order with Fischer, to obtain all required public permits for the racking installation. If the permit is not granted, revoked, or withdrawn, the contractor is not liable. For assembly carried out by Fischer, it is assumed that a valid building permit is present at the time of installation. Any required statically verifiable calculations for the building application will be supplied for a fee; please contact us.
Cantilever rack 1 pc: €1,500.00
Base rounding as a safety element, 3 pcs: €13.50 per base and side
Storage location: Customer site
Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.
Šie skelbimai taip pat gali jus sudominti.
Mažas skelbimas
Borken
1 181 km
Sluoksnio storio matuoklis su programine įranga ir kompiuteriu
Fischer FISCHERSCOPEX-RAY XDL 240 XRF
Fischer FISCHERSCOPEX-RAY XDL 240 XRF
Mažas skelbimas
España
2 606 km
Fleksografinė spaudos mašina
Fischer & KreckeFlexpress 16S/10
Fischer & KreckeFlexpress 16S/10
Mažas skelbimas
Oelde
1 103 km
Matavimo įranga
JOHANN FISCHERMesswinkel Measuring Angle
JOHANN FISCHERMesswinkel Measuring Angle
Mažas skelbimas
Louny 1
854 km
FISCHER & KRECKE FLEKSO SPAUSDINIMO MAŠINA
Fischer & Krecke31 DF
Fischer & Krecke31 DF
Mažas skelbimas
Eislingen/Fils
1 206 km
Paspauskite stabdį - hidraulinis
FISCHERHAKS 10/3200
FISCHERHAKS 10/3200
Mažas skelbimas
Goldenstedt
1 043 km
Paspauskite stabdį - hidraulinis
FISCHERDAP 5 /1500
FISCHERDAP 5 /1500
Mažas skelbimas
Bruchsal
1 243 km
Matavimo plokštė/Johann Fischer
Johann Fischer AschaffenburgMessplatte / Messtisch
Johann Fischer AschaffenburgMessplatte / Messtisch
Mažas skelbimas
Wymysłów
504 km
Matavimo sistema
Fischer DUALSCOPE DMP40Fischer DUALSCOPE DMP40
Fischer DUALSCOPE DMP40Fischer DUALSCOPE DMP40
Mažas skelbimas
Günzburg
1 195 km
Paspauskite stabdį - hidraulinis
FISCHERDAP 20/4100 NG
FISCHERDAP 20/4100 NG
Mažas skelbimas
Bruchsal
1 239 km
Fischer išsikišančių lentynų partija
FISCHER
FISCHER
Jūsų skelbimas sėkmingai pašalintas
Įvyko klaida




























































































