Konvejerio juosta (1)

Fimatech

Sąlyga: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW Giedpfeirax Ujx Abdol - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, The machine comes from the Daimler Benz technical center and has 150 operating hours. X-axis travel: 650 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Table size: 1,100 x 600 mm Table load capacity: 450 kg Spindle speed range: 6,500 rpm Spindle taper: SK 40 Tool changer: 24 stations Control: Siemens 840 D Total power requirement: 20 kW Machine weight: 5,500 kg Gijdpfx Aetdfbmobdjl Space required (W x D x H): 2.3 x 3.1 x 2.3 m Condition: very good

Gamybos metai: 2023, Sąlyga: naujas, Aluminium angled conveyor belt with substructure Including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 3,750 mm Inclined section: 3,200 mm Incline angle at the bend: 45° Total conveyor belt length (measured on the ground): 6,000 mm Discharge height: 2,500 mm Height of horizontal section: 250 mm Design: Aluminum construction - Reinforced two-times profile 90x45 mm Drive and return drum made from S235 steel, welded and machined Ø100x520 mm crowned and turned, shaft fixed with bearing units. Drive: Shaft-mounted geared motor 0.55 kW, speed 0.3 m/sec Connection 230/400 V, 50 Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC incl. PVC corrugated sidewalls, green Belt width: 500 mm 2 pcs. 40 mm high, 35 mm wide corrugated sidewalls, high frequency welded 46 pcs. T-40 cleats, approx. 300 mm spacing Belt material: 2-ply, especially cross-stable In the bend area, the belt is guided on each side by 3 hold-down rollers. Giodpfxoht Uzas Abdsl The belt is manufactured with a 70 mm edge-free zone on both sides. Due to the corrugated sidewalls on both sides, the usable belt width is reduced: Usable width: 290 mm, as follows: (Top view) Crosswise arrangement 70+35+290+35+70 mm Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop tailor-made, individual solutions and deliver systems from our own production. Feel free to contact us by phone as well to find a suitable solution for your application. Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), Flat belt conveyor in steel construction without substructure Conveyor belt length: 4,500 mm Belt width: 600 mm PU conveyor belt with wave edge, petrol matt finish Drive: 1.1 kW motor, speed 0.3 m/sec Connection 230/400V, 50Hz, protection class IP54 2 pcs. wave edges 80x45 mm T60 cleats, pitch approx. 250 mm 2-ply, especially cross-stable Godpfei E Stcex Abdjil Usable width 500 mm, specified as follows: Cross arrangement -45+5-500+5-45mm Carrying roller construction beneath running surface Conveyor frame in light square tube construction Paint: RAL 5015 sky blue

Sąlyga: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, konvejerio juostos ilgis: 2 530 mm, konvejerio juostos plotis: 690 mm, bendras ilgis: 2 530 mm, bendras plotis: 770 mm, galia: 0,37 kW (0,50 AG), variklių gamintojas: SEW, diržo plotis: 600 mm, Belt Conveyor / Conveyor Belt / Belt Strip Colour: Light grey Manufacturer: AMI Fördertechnik Condition: Used Model: Belt Belt Type: Longitudinal ribs Year of Manufacture: 2016 Total length: approx. 2530 mm Total width incl. motor: approx. 770 mm Gisdpfx Abjtzd Ixsdol Total width without motor: approx. 690 mm Belt width: approx. 600 mm Frame made of metal Frame height: approx. 80 mm Includes SEW motor (0.37 kW) Stock: 8 units Price per unit Features: Condition: Fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology was in operation until deinstallation. Thanks to the excellent workmanship of the conveyor system, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customised offer or assist you with design or installation queries. Simply let us know your requirements and on-site conditions. Benefit from our many years of experience and our excellent network of specialists. We have already successfully implemented projects for companies from various sectors, such as logistics, the pharmaceutical industry, skilled trades or the electronics industry. Together, we will find ways to optimise your processes and material flow in a cost-effective and sustainable manner. We can also supply fully automated sorting technology or additional components such as order picking racks or containers.

Sąlyga: naujas, Gamybos metai: 2025, Extremely powerful industrial magnet for iron separation Special price: €970 net (shipping €14.90 net) *Refer to image 2 for construction lengths The active side features a stainless steel end plate (material 1.4301). Threaded holes for mounting are located on the rear side. *Grip available on request These block magnet systems are suitable for use at operating temperatures up to max. +100°C. The magnet surface should be regularly cleaned of collected iron parts. Typical pickup distances for all types, e.g.: For an M5 steel nut: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Installation example 1: Mounted above a conveyor belt, “iron particles jump onto the magnetic contact surface.” Installation example 2: Mounted in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade setup using multiple block magnets in series is possible. Gijdpfx Astqfhxobdel Installation and safety notes: When handling, unpacking, and mounting, ensure that no loose iron parts (such as tools or screws) are nearby. The magnetic force is so strong that serious injuries can occur if fingers get caught between iron parts and the magnet’s active surface. No steel parts should be located within a minimum distance of 400 mm beneath the active magnetic surface.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, konvejerio juostos ilgis: 1 610 mm, konvejerio juostos plotis: 690 mm, bendras ilgis: 1 610 mm, bendras plotis: 770 mm, galia: 0,37 kW (0,50 AG), variklių gamintojas: SEW, diržo plotis: 590 mm, Belt conveyor / conveyor belt / belt band Colour: Light Grey Manufacturer: AMI Fördertechnik Condition: Used Model: Belt Band Gedpfxetu Iq Ao Abdeil Belt Type: Longitudinal Grooves Total length: approx. 1,610 mm Total width incl. motor: approx. 770 mm Total width without motor: approx. 690 mm Belt width: approx. 590 mm Frame made of metal Frame height: approx. 80 mm Including SEW motor (0.37 kW) Stock: 10 units Price per unit The conveyor system was in operation until dismantling. Condition: fully functional, with signs of use Ideal for rapid material transport Collection address: Industriestraße 5 (47918 Tönisvorst) Professionally dismantled and packaged Thanks to the high-quality workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics Whether for roller conveyors, belt conveyors, incline conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a customised offer or advise you on system design or assembly questions. Simply let us know your requirements and the on-site conditions. Take advantage of our many years of experience and our excellent network of industry experts. We have already successfully implemented projects for companies in various sectors, such as logistics, pharmaceutical industry, skilled trades, and electronics sector. Together, we will develop ways to optimise your processes and material flow cost-effectively and sustainably. We can also supply fully automated sorting technology or complementary components such as order-picking racks or containers.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, konvejerio juostos ilgis: 2 250 mm, konvejerio juostos plotis: 600 mm, Įranga: Tipinė plokštelė prieinama, Stock no.: 503508 Machine type / Equipment type: Conveyor belt Manufacturer: MK Maschinenbau Kitz GmbH Model: GUF-P 2000 AF 2550-600 Year of manufacture: 2008 - Belt conveyor for light and medium-weight conveyed goods. Flat belt conveyor: Belt width: 600 mm Belt length: 2250 mm Load capacity: 75 kg Giodpfeuiwrrjx Abdol

Sąlyga: naujas, Universally applicable double grinding machine for professional users. The induction motor operates quietly and maintenance-free thanks to high-quality ball bearings. Premium grinding wheels ensure optimal results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Grinding wheel grit: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON/OFF switch to IP54 with undervoltage release - Extended range of applications thanks to an optionally available grinding attachment - Universal use for a wide variety of materials (metal, plastic, wood, ...) - Very smooth operation due to balanced rotor with high-quality ball bearings - Large safety glass panels offer optimal protection against sparks - Stable and adjustable cast workpiece support - Powerful traction thanks to high-performance drive motor Gsdpfx Abevnrm Hjdeil Scope of delivery: - Rough grinding wheel K 36 - Fine grinding wheel K 80 - Spark protection on both sides - Workpiece support Note: Images may show special equipment and application examples not included in the scope of delivery. (Belt grinding attachment and base stands available at an extra charge)

Sąlyga: geras (naudotas), Gamybos metai: 1965, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 930 mm, For sale: Schnellradial drilling machine by Donau, type DR30 The machine is in good and fully functional condition. Technical Data: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle taper: MK 3 Spindle speeds: stepless, approx. 45 - 2240 rpm Quill stroke: approx. 170 mm Arm reach: approx. 930 mm Arm swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Gsdpfxjwal Hpo Abdoil Equipped with: - Tapping unit with automatic shut-off and reverse - Motorized height adjustment of the arm - Left-hand drilling control, manual and foot operation Transport and loading can be organized Europe-wide on request and at an extra charge. Prices plus VAT An inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.