1 miršta 2 pučia antraštės

FIDE EF1

Būklė: naudotas, Technical Details: Wire diameter - max.: 9.0 mm Wire diameter - min.: 2.0 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Machine weight approx.: 5.0 t Dimensions lubricating unit (LxWxH): 830 x 650 x 1000 mm Dimensions machine approx. (LxWxH): 3.3 x 1.5 x 1.45 m Dimensions control cabinet (LxWxH): 0.7 x 1.5 x 1.75 m WIRE STRAIGHTENING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically and hydraulically controlled universal spring coiling machine for the production of right- and left-handed tension and compression springs as well as torsion springs. Springs can be produced with any desired pitch and coil body shape. Output max. 90 pcs/min. Spring outer Ø: 10 - 120 mm Wire feed length unlimited, feed speed = 27 - 80 m/min. Coiling unit: Two-finger system, wire diameter Ø 2.0 - 9.0 mm; spring outer Ø 10 - 120 mm Single-finger system: wire diameter Ø 3.0 - 7.0 mm; spring outer Ø max. 60 mm Hodpfx Aovc Aklof Doff Equipment: 5x feed rollers, wire intake 3 mm, two-finger Spring length measuring device LION PRECISION-PANTHER Wire reel holder POST, motor-driven, mandrel Ø 1,400 mm Lubricating unit Control cabinet cooler RITA Hydraulic power unit A wide range of accessories and/or spare parts available on request! i.D.

Būklė: geras (naudotas), Gamybos metai: 1970, For sale: Hilgeland model CH5AL header Hsdpfsu Szucex Af Deff The machine is in perfect technical condition. Machine weight: approx. 20 tons The header is equipped with a comprehensive set of accessories. Loading provided. Maximum diameter of normalized bolt: 16 mm Maximum length: 200 mm

Būklė: geras (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 39035,

Gamybos metai: 1988, būklė: geras (naudotas), Carlo Salvi 1-Matrize 2-Schlag Modell 780/SV Maximaler Abschneidedurchmesser (mm): 6,35 Hfodpohrdmxjfx Af Dof Maximale Abschneidelänge (mm): 97 Maximale Ausstoßlänge (Stempelseite) (mm): 80 Maximale Geschwindigkeit (Stück/Minute): 360

Būklė: naudotas, Gamybos metai: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm, vertical automatic feed Hfedpfx Aowq Nc Nef Dof with electro-magnetic fine-pole chuck, grinding wheel diameter: 300 x 50 x 76.2 mm, with paper band filter system, manual dresser mounted on top. Various wheels and flanges included. Weight: approx. 2,400 kg Footprint approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please contact us for further information.

Būklė: geras (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, 2-BLOW COLD FORGING MACHINE NATIONAL M5 For the production of semi-pierced parts Fully operational Recently overhauled! Hfedpfxetxni No Af Dsf Number of dies: 1 Production rate: 300 pieces/min Rivet length: 20 mm Maximum piercing depth: 5 mm Cut-off diameter: 5 mm Floor space (width): 1,300 mm Floor space (length): 2,690 mm Main motor power: 7.5 kW Net weight: 3,100 kg Gross weight: 3,700 kg

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Hedpeuz If Nofx Af Djff Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), Working width: 2300 mm, max. roll diameter: 1500 mm, working speed: 180 m/min, includes crane runway and longitudinal slitting unit. Shaft, timing belt, and wiring have been renewed. Hfjdsd Hr Uzspfx Af Def

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, CNC: HEIDENHAIN 530 Drilling diameter: 32 mm Drilling depth: 1000 mm X-axis travel: 2000 mm (table) Y-axis travel: 800 mm (vertical) Z-axis travel: 2000 mm (T-column) Table dimensions: 1500x1000 mm Table load capacity: 7/10 tons Indexing angle: 360° Milling spindle: SK40 M30, 200 cm³/min Hfjdpsvznyiefx Af Dof Motor power: 11 kW Spindle speed: 6000 rpm 24-position tool changer Overall dimensions: 5600x5000x3320(h) mm 100 bar pump

Būklė: naudotas, Gamybos metai: 1995, x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Table size: 1300 x 600 mm Max. workpiece weight: 2000 kg Hfodpfjvw Duhsx Af Def Spindle taper: ISO 50 Spindle speeds - infinitely variable: 30 - 3500 rpm Feeds - infinitely variable: 1 - 6000 mm/min Rapid traverse: 10 m/min Main spindle drive power: 18 kW Spindle torque: 500 Nm Distance spindle / clamping surface max.: 267 - 867 mm Distance table / vertical head: 58 - 658 mm Mains voltage: 380 V / 50 Hz Control voltage: 230 V Total power requirement: 22 kW Machine weight approx.: 6.5 t Dimensions: 3.6 x 4.2 x 2.3 m CNC control: DR. HEIDENHAIN TNC 360 Hydraulic tool clamping system Electronic handwheel Vertical head manually swivelling Coolant system,