NC sukamasis stalas

Fibro NC1.03.0340.1.1.04.04

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 Rodpew T Tcwefx Alcsch - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Gamybos metai: 2024, būklė: naujas, Universal testing machine H 5 TMNI (L) – 250mm Extended Version Mechanical structure: according to DIN EN ISO 7500-1 and ASTM E4 2 backlash-free recirculating ball screws, brushless drive motor, Fmax = 5 kN, stiffness 9.4 kN/mm Rodpjiq Hxvsfx Alcsch 1 test space up to rated load: Test space width: 420 mm Max. test stroke without test fixtures, adapters, and KMZ: 1270 mm Max. test space height (between lower fixed and movable crosshead) without test fixtures, adapters, and KMZ: 1325 mm Travel speeds: Testing speed 0.001 – 1200 mm/min up to rated load Return speed 1200 mm/min Force measurement: Measuring range depending on the used load cell: 0.4 – 100 % of rated load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement depending on integration time between: +/-160,000 and +/-900,000 digits. The machine is supplied with a factory test certificate. If customer requests a factory or DAkkS calibration at the installation site, these costs must be calculated separately. Crosshead travel measurement: Incremental quadrature input with encoder monitoring, storage of the crosshead position Resolution of crosshead travel measurement:

Būklė: naudotas, Gamybos metai: 2000, Didžiausias atstumas nuo centru 400 mm Redpfey Ty Ihjx Alcech Didžiausias atstumas tarp centru 3 000 mm Maks. apsisukimo skersmuo virš lovos 810 mm Maks. apsisukimo skersmuo virš skersinio stalo 510 mm Didžiausias apsisukimas įlaidoje 850 mm Valdymas WEILER Maks. ruošinio svoris 3 800 kg Veleno skersmuo priekinėje atramoje 150 mm Veleno pragręžimo skersmuo 106 mm Planšeto skersmuo 630 mm Įrankių sistema Parat Kopetinio centro kiaurymės kūgis MK 6 Kopetinio centro skersmuo 115 mm Veleno sūkių diapazonas 1–1 800 aps/min Tekinimo staklės – ciklinio valdymo | WEILER - E80 x 3000, su 630 mm planšetu, 400 mm SCHUNK ROTA-S plus patronu, gręžimo strypų laikikliu, PARAT įrankių sistema ir drožlių transporteriu. Į komplektą įtraukta plati įrankių pakuotė. Vaizdo įrašą iš įmonės galima atsiųsti pagal užklausą. Staklės yra geros būklės. Daugiau techninių duomenų rasite pasiūlyme. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Žymos: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Būklė: reikia remonto (naudotas), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 X axis: 500 mm Rodowmwrdjpfx Alcoch Y axis: 350 mm Z axis: 610 mm Motor spindle: 18,000 rpm Power: 10.2 kW Tool changer: 24 positions Weight: 3,200 kg with 4th axis Tools: SK 30 approx. 40 tool holders The machine has the following issues: - Heidenhain control 430 has defects (booting not always possible, crashes during machining)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 70.0961.000.253, TECHNISCHE DATEN: Umlaufdurchmesser: - Über Bett: 800 mm - Über Support: 560 mm - Planscheibendurchmesser: 750 mm Spitzenhöhe: - Über Flachbahnen: 380 mm - Über Prismenbahnen: 358 mm Bett, Lünette und Ausnehmung: - Drehdurchmesser im Bettbereich: 980 mm - Breite der Ausnehmung vor der Planscheibe: 380 mm - Schwenkbereich in der Ausnehmung: 1040 mm - Breite der Ausnehmung vor der Planscheibe im Schwenkdurchmesser: 330 mm - Bettbreite: 560 mm Spindelstock: - Spindelbohrungsdurchmesser: 90 mm - Spindeldurchmesser im vorderen Lager: 145 mm - Spindelkonus: MK 6 Spindeldrehzahlen: - Anzahl: 18 - Drehzahlbereiche: Redpfsup A Rzsx Alcoch 7,1 - 355 min⁻¹ 9,0 - 450 min⁻¹ 11,2 - 560 min⁻¹ Erforderliche Leistung: 7,5 - 14 kW Vorschübe: - Anzahl: 32 - Längsvorschübe pro Umdrehung: 32 Längsvorschübe: 0,071 - 2,5 mm/U 32 Quervorschübe: 0,04 - 1,4 mm/U Extras: Zusatzausrüstung, Maschinenhandbücher

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Rcedpfx Aljr A Hcbjcoh Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: visiškai atnaujintas (naudotas), Exzenterpresse SGP Typ: PEZZ 500/1700/1000 Presskraft: 500 t Tisch: 1700 x 1000 mm Hubweg: 20–153 mm Rsdpfx Alshqqnzscech Abstand zwischen Stößeloberpunkt und Tisch: 800 mm Abstand zwischen Stößelunterpunkt und Tisch: 700 mm Gewicht: 40 t Hergestellt in Österreich

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis and B-axis, designed for complete machining of turned and milled components. Integrated spindle motors (ISM) on both main and counter spindles with thermocompensation system (liquid-cooled). Drive power: Main spindle - 29 kW Sub spindle - 22 kW Speed range: Main spindle: 0-5,000 rpm Sub spindle: 0-7,000 rpm Spindle connection (DIN 55026): Main spindle: KK 6 (bar capacity 65 mm) Sub spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is constructed in such a way that the resulting cutting forces are distributed over two axes, providing extremely high rigidity for all machining operations. B-PowerMill: For the machining of angular surfaces and bores, a motorized milling spindle with a 24-position tool magazine is integrated into the upper slide system. The swivel range of 210° can be infinitely adjusted and interpolated. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D control including: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through the sub spindle * 12-position radial VDI 30 turret with directional logic for up to 12 driven tool stations! Swivel speed adjustable with feed override. Performance data: Max. 6.7 kW at 2,650 rpm Constant torque 25 Nm Speed range 0-5,000 rpm - C-axis for both main and sub spindle - TRANSMIT software for easy C-axis programming * Finished parts removal device Rodpfjxz Ab Rex Alcoch * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm ("hinged belt" type) * Coolant system integrated into chip conveyor 1 High-pressure pump 14 bar 1 High-pressure pump 14 bar incl. 20 µm fine filter 2 Flush pumps 3.7 bar * Electrical cabinet air-conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine work light * Interface for foot switch * Documentation Including: - Handwheel - PC keyboard - Network interface - Tool monitoring - Turned part window - Cleaning gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), SMS MEER CNC-Doppelseitige Anfasmaschine Hersteller: SMS MEER Typ: RFA 14 Rcsdpfoghrguex Alcjh Baujahr: 2000 Arbeitsbereich: Rohrdurchmesser Ø 21,3 – 114,3 mm Wandstärke: 2,3 – 11 mm Länge: 6–12 m Die Anlage besteht aus zwei RFA14-Anfasmaschinen mit Transportvorrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Innen- und Außen-Anfasen beider Rohrenden. Das Rohrbearbeitungsspektrum umfasst einen Durchmesserbereich von 21,3 bis 114,3 mm und eine Wandstärke von 2,3 bis 11 mm bei einer Rohrlänge von 6 bis 12 m. Die Fördertechnik im Bereich der Anfasmaschinen dient dazu, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu transportieren.

Būklė: naudotas, Gamybos metai: 2004, Technical details: X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 60 mm Tool holder: SK40 Magazine positions: 30 slots Table clamping surface: 630 mm Machine type 5-axis CNC milling machine Manufacturer: DMG Rsdpfx Alsw Dud Sscoch Model: DMU 60 P