Cilindrinio šlifavimo staklės

FERREL Giustina

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, X ašies eiga: 8 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 2 500 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, bendras plotis: 5 800 mm, bendras aukštis: 4 500 mm, bendras ilgis: 13 500 mm, stalo ilgis: 10 000 mm, stalo plotis: 1 250 mm, Travelling column – high performance, precision, and machining capability Linear RAM guide combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with through-spindle coolant at 15 bar Chip conveyor BLUM 3D measuring probe Wide bed, linearly guided on the X-axis, traverse path W = 930 mm Rotary table drive pre-installed in electrical cabinet X-Axis: 8,000 mm Y-Axis: 1,300 mm Z-Axis: 2,500 mm Rcodpfx Aloyr Dmdeceh Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feedrate: 35,000 mm/min Y-axis feedrate: 40,000 mm/min Z-axis feedrate: 40,000 mm/min Milling head auto-indexing: 0.001 x 0.001 deg Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page was provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, these details do not constitute representation or contractual terms. We recommend verifying all critical details.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: Rjdpfx Alew T Tcwscoch - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Būklė: naudotas, Pressure: 160 t Passage width / mm Stroke / mm Working height: 800 mm Total power requirement: 15 kW Rodpfjiulkqox Alcoch Machine weight approx. 11.8 t - Table size: 1000 x 1000 mm - Distance table/ram, max. stroke up, adjustment up: 800 mm Additional information: Movable table

Būklė: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 000 t, Ковашки чук SMERAL тип KJH 4 Пневматично-хидравличен матричен срещуударен ковашки чук. Тегло на бойната глава, кг: 1 800 Номинална енергия на удара, кгм: 4 000 Брой удари на бойната глава, 1/мин: 48 Ход на бойната глава, мм: 500 Площ на матрицата, мм: 286 x 600 Минимална височина на матрицата, мм: 350 Мощност на главния електродвигател, kW: 45 Дължина на машината, мм: 3 100 Ширина на машината, мм: 1 900 Височина на машината, мм: 3 900 Rjdpfxjwbginj Alcsch Тегло на машината, кг: 27 000

Gamybos metai: 1999, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition, equipped with a tool lift system, ideal for the use of flat broaching tools. Rcjdsr A Hcbspfx Alcsh Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Tool holder in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by the machine body of the tool tray) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine dimensions (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt, 50 Hz Connected load: 9 kW Equipment: • The machine has an electric control for the broaching stroke movement with both manual and automatic operation. • Integrated coolant/lubrication system • Tool lift system for flat broaching tools (no automatic feed) • The broaching slide with pull head holder is equipped with flat guides on both sides Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg) • Complete machine documentation, including CE declaration of conformity Remarks: The machine is ideal for manufacturing keyway slots. Thanks to its robust machine bed and the integrated tool lift system, it is especially well-suited for quick and easy use of flat broaching tools. The machine has had very limited use and is in near-new condition. The machine is available for inspection at our warehouse and can be demonstrated under power. Our direct contact details and further information about the machine can be found in the attached PDF document.

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, HAAS VF-2SS | 4-oji ašis | Aušinimo skystis, paduodamas per veleną | 2014 m. Vertikalus CNC apdirbimo centras HAAS VF-2SS, pagamintas 2014 m. Rcjdpfx Aloz Dh Edoceh Staklės yra komplektuojamos su 4-ąja ašimi ir aušinimo skysčio tiekimu per veleną (TSC). Techninės specifikacijos: X ašies eiga: 762 mm Y ašies eiga: 406 mm Z ašies eiga: 508 mm Stalo matmenys: apytiksliai 914 × 356 mm Maksimali stalo apkrova: apytiksliai 680 kg Veleno greitis: 12 000 aps./min. Veleno kūgis: CT/BT 40* Veleno pavara: tiesioginė pavara Įrankių keitiklis: 24+1 padėtys* Greitasis judesys X/Y/Z: iki 35,6 m/min. CNC valdymas: HAAS Aušinimo skystis, paduodamas per veleną (TSC) 4-oji ašis įeina į komplektą Įrankių laikikliai: neįeina į komplektą Pagamintas: 2014 m. Eksploatavimo valandos: duomenų nėra Ankstesnis eksploatavimas: 2–3 pamainos Įranga: 4-oji ašis Aušinimo skystis, paduodamas per veleną Didelio greičio „Super Speed“ (SS) versija Automatinis įrankių keitiklis Aušinimo sistema Staklių apžiūrą galima suorganizuoti iš anksto susitarus.

Būklė: naudotas, Gamybos metai: 1999, Presskraft 180 t Biegelänge 3100 mm Ständerweite 2550 mm Ausladung 310 mm Hub 200 mm Zustellgeschwindigkeit 80,0 mm/s Arbeitsgeschwindigkeit 10,0 mm/s Rückzugsgeschwindigkeit 58,0 mm/s Einbauhöhe 385 mm Tischbreite 240 mm Arbeitshöhe 885 / 1050 mm Öltankvolumen 180 l Anschlusswert 15,0 kW Maschinengewicht ca. 9850 kg Abmessungen (LxBxH): 4200 x 1750 x 2450 mm Aus Instandhaltungswerkstatt, gepflegter Zustand (!!) – In gewartetem Zustand – Maschinenvideo – ?v=o_t9BBMsNNs Ausstattung: - Einfache, konventionelle elektro-hydraulische Abkantpresse * Mit Torsionswelle zur Sicherstellung der Parallelität des Oberbalkens - Elektrischer Hinteranschlag mit Kugelumlaufspindeln (X-Achse) * 4x manuell verstellbare Anschlagfinger * Feineinstellung vorne per Handrad, mit analoger Positionsanzeige - Elektromotorische Einstellung der Eintauchtiefe (Y1 + Y2 Achse) * Mit digitaler Positionsanzeige - Schwenkbare Bedienkonsole, Anbau links - 1x Satz Oberwerkzeuge - 1x drehbarer MULTI-V Universalmatrizenblock 125x125 mm - 2x vordere / verschiebbare Auflegearme - 1x freibewegliche Zwei-Hand-/Fußbedienung - Bedienungsanleitung (PDF) --- Professional English translation for machinery listings: Press force: 180 t Bending length: 3100 mm Frame width: 2550 mm Throat depth: 310 mm Stroke: 200 mm Approach speed: 80.0 mm/sec Working speed: 10.0 mm/sec Return speed: 58.0 mm/sec Installation height: 385 mm Table width: 240 mm Working height: 885 / 1050 mm Oil capacity: 180 l Total power requirement: 15.0 kW Machine weight approx. 9850 kg Dimensions (LxWxH): 4200 x 1750 x 2450 mm From a maintenance facility, well-maintained condition (!!) – Delivered in serviced condition – Machine video – ?v=o_t9BBMsNNs Features: - Simple, conventional electro-hydraulic press brake * With torsion bar for parallel alignment of the upper beam - Electric backgauge with ball screw spindles (X axis) * 4x manually adjustable stop fingers * Fine adjustment via front handwheel, with analogue position indicator - Electro-motor adjustment of ram depth (Y1+Y2 axis) * With digital position display - Swiveling control panel, mounted on left side - 1x set of upper tooling - 1x rotating MULTI V universal die block 125x125 mm - 2x front / moveable support arms - 1x freestanding two-hand/foot controller Rcedpfx Aoxab Erolcoh - Operating manual (PDF)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Sūpynės 806 mm, Sūpynės virš skersinio stalo 527 mm, Maksimalus tekinimo skersmuo 457 mm, Atstumas tarp centrų 762 mm, Maksimalus tekinimo ilgis 584 mm, C ašis 0,01 laipsnio tikslumu, Frezavimas 3000 aps./min, 3,7 kW, Rcjdpfx Aezg Efielceh Y ašis +/- 50 mm, Strypo pralaidumas 76 mm, Veleno variklis 22,4 kW, Veleno greitis 3400 aps./min, Spartus padavimas 24 m/min, 24 vietų revolveris, drožlių transporteris, galinis atrama, įrankių matuoklis, aušinimas,

Būklė: naudotas, TECHNICAL DATA - Number of axes: 4 MAIN SPINDLE - Spindle nose: A2-8 - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar capacity: 80 mm - Max. machining diameter: 366 mm - Minimum C-axis resolution: 0.001° TURRET - Number of stations: 12 - Number of driven stations: 12 - X/Z travel: 280 x 785 mm - Y travel: +/- 50 mm - Driven tool speed: 6000 rpm - Driven tool power: 5.5 kW TAILSTOCK - Tailstock type: Numeric - Taper type: MT5 - Distance between centers: 705 mm ELECTRICAL SUPPLY Rcjdpsyxr U Refx Alceh - Supply voltage: 400 V - Total connected load: 39 kVA MACHINE HOURS - Operating hours: 7,261 h WEIGHT AND DIMENSIONS - Footprint: 3800 x 2143 mm - Machine height: 2,232 mm - Machine weight: 6,100 kg EQUIPMENT - Control: MORI MSX-850 III (Mitsubishi 720BM) - Tool touch probe system - 3-color status light - Coolant tank - Chip conveyor - 3-jaw chuck: hydraulic - Number of driven tool holders: 3

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 13 000 mm, Y ašies eiga: 5 000 mm, Z ašies eigos atstumas: 1 200 mm, veleno greitis (maks.): 2 500 aps./min, frezos galvos padėtis: Testa ad assi ortogonali indexati - TTL2 25 360, ašies skersmuo: 180 mm, W ašies eiga: 1 000 mm, stalo apkrova: 100 000 kg, greitas poslinkis X ašimi: 20 m/min, greitas poslinkis Y ašis: 20 m/min, greitasis eiga Z ašyje: 20 m/min, stalo ilgis: 3 000 mm, stalo plotis: 3 500 mm, šilko eigos atstumas: 2 500 mm, quill skersmuo: 180 mm, spindelio eiga: 1 000 mm, ruošinio svoris (maks.): 100 000 kg, sukimo momentas: 9 050 Nm, CNC BORING MACHINE PAMA model SPEEDRAM 2000 Hydrostatic CNC Control: Siemens Sinumerik 840D Travel: - X axis: 13,000 mm - Y axis: 5,000 mm - Z axis: 1,200 mm - W axis: 1,000 mm Total axial stroke (Z+W): 2,200 mm Feed rate on all axes: 8,000 mm/min Rapid traverse on all axes: 20,000 mm/min Spindle: - Boring spindle diameter: 180 mm - Ram (spindle holding shaft) dimensions: 400 x 440 mm - Spindle speed (3 ranges) max: 2,500 rpm - Spindle power (S1): 91 kW - Nominal spindle torque (S1): 9,050 Nm - Boring spindle internal taper: ISO 50 DIN 69871 AD-Type Big Plus Orthogonal indexing head - TTL2 25 360 Tool taper: ISO 50 DIN 69871/2 AD-Type Big Plus Max spindle power: 25 kW Max spindle speed: 2,500 rpm Speed ratio: 1:1 Spindle indexing: +/- 100°, 200 positions per 1° Head indexing: +/-180°, 360 positions per 1° Max nominal spindle torque: 1,000 Nm Rotary-travelling table TH 100: - Table dimensions: 3,000 x 3,500 mm - Load capacity: 100 tons - Central T-slot size: 36h7 mm - Side T-slot size: 36h12 mm - T-slot pitch: 320 mm - Longitudinal travel V axis: 2,500 mm - Feed/rapid speed on V axis: 10,000 mm/min Chain-type tool magazine cu 145 r80, 80 tools Machine weight approx. 160/165 tons Complete with: - Hinged belt chip conveyor - No. 02 chip conveyors on each side of the rotary table - Accessory storage (2+1 positions), fixed closed type - Fixed tool rack (ISO50, 6 positions) - External and internal coolant system, 30 bar - Wireless workpiece probe (Renishaw) Rodpfx Aleyxg Hbjcoch USED MACHINE Year: 2009