Smulkių detalių presas - hidraulinis

FEINTOOL HLT 1250

Gamybos metai: 2008, Sąlyga: naudotas, Pressure: 315 t Stroke: 40–200 mm Stroke rate: 20–100 strokes/min Ram adjustment: 120 mm Ram area: 2000 x 1100 mm Table area: 2000 x 1200 mm Pass-through opening in table: 1700 x 250 mm Shut height (ram up, slide adjustment up): 500 mm Lateral frame clearance: 820 x 650 mm Total power requirement: 45 kW Machine weight: approx. 44 t Hydraulic clutch-brake combination Hydraulic overload protection in the ram Semi-automatic stroke adjustment Motorized ram adjustment Stroke rate frequency controlled Central grease lubrication for guides Oil recirculation lubrication Ram counterbalance cylinder Front/rear safety door Hydraulic die clamping system Extendable table plate Hydraulic roll block rails in the table Feed: Helmerding EWH800/150 (V-1341-6518) Strip width: 100–800 mm, strip thickness: 0.5–6.0 mm, max. strip cross-section: 1600 mm² Air blow-off/intermediate venting, height adjustment via gear motor Straightener: R-70/800/9-S (R-1343-6518) Strip width: 100–800 mm, strip thickness: 0.5–4.0 mm Max. strip cross-section: 1600 mm² at 450 N/mm² Iedpfordi Dlex Abkeik Straightening speed, frequency controlled up to 25 m/min Strip feed assist: transfer table with hydraulically adjustable separation wedge Hold-down, hydraulically adjustable Strip edge guide: 1 pair lateral roller guides, adjustable via handwheel Feed rollers: 2x rollers, Ø140 mm, pneumatically adjustable Straightener: 9x rollers, Ø70 mm, adjustable manually via handwheel Uncoiler: HE-4/800/MOT/HYD (H-1342-6518) Strip width: 100–800 mm Max. load: 4 t Coil inner diameter: Ø508 mm Coil outer diameter: Ø1000–1600 mm Drive, frequency controlled Limiting arms Hydraulic expansion Hydraulic hold-down arm

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Iiedpew T Sc Nofx Abkek Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: naudotas, Gamybos metai: 1996, mašinos/transporto priemonės numeris: 7/4986, Total pressing force: 250 - 400 t Hydraulic ring-tooth force (lower table): 20 - 200 t Hydraulic counterforce (upper table): 10 - 100 t Ram stroke: 30 - 200 mm Ring-tooth stroke: 40 mm Counterholder stroke: 40 mm Max. tool dimensions: 765 x 760 x 610 mm Number of strokes: 40 min⁻¹ Rapid traverse down: 120 mm/s Rapid traverse up: 135 mm/s Working speed: 5 - 50 mm/s Total tool weight: 2,400 kg Ijdpfxeuqdxis Abksik Standard equipment Automation Pay-off tray with straightening machine

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, CNC valdiklis: M720BM Talpa X ašies eiga mm: 260 Y ašies eiga mm: ±50 (100) Z ašies eiga mm: 795 Tekinimo ilgis mm: 705 Didžiausias tekinimo skersmuo mm: ø 356 Apsisukimo skersmuo virš lovos mm: ø 923,8 Apsisukimo skersmuo virš skersinio slankiklio mm: 755 Strypo apdirbimo skersmuo mm: 80 C ašies padalos laipsnis: 0,001° Viršutinis revolveris Įrankių lizdų skaičius vnt.: 12 Varomų įrankių apsukos APS/min: 6.000 Varomų įrankių pavaros galia kW: 5,5/3,7 (3 min/nuolatinis) Indeksavimo laikas s: 0,25 Pagrindinis velenas Veleno apsukos aps/min: 4.000 Pagrindinio veleno pavaros galia kW: 18,5/15 (25% ED/nuolatinis) Veleno kiaurymė mm: ø91 Galinis centravimo antgalis Centro eiga mm: 734 Laikiklis: MT5 Isdpfxexcqz Ie Abkoik Įranga Drožlių transporteris Įrankių matavimo svirtis

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1970, Funkcionalumas: visiškai funkcionalus, veleno ilgis po galvute: 30 mm, dalies ilgis (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Isdpfxsur N Daj Abkoik Year of manufacture: 1970 The machine is immediately ready for operation!

Sąlyga: geras (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 39035,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1987, Pressing force 320 t Sheet thickness 0 mm Strokes per minute 80 spm Total pressing force 320 t Stroke 30 - 80 mm Lower table clamping surface: 630 x 740 mm Upper table clamping surface: 630 x 630 mm Total power requirement 60 kW This FEINTOOL HFA 320 fine blanking press was completely overhauled in 2019 and is in as-new condition with a new CE marking. MAIN RAM Total force (nominal): 320 t Stroke min.: 30 mm Stroke max.: 80 mm V-RING Nominal force: 160 t Stroke: 30 mm COUNTER RAM Nominal force: 80 t Stroke: 30 mm TOOL DIMENSIONS Lower table width: 630 mm Lower table depth: 740 mm Iiodpfovwgl Njx Abkjk Upper table width: 630 mm Upper table depth: 630 mm Maximum daylight: 320 mm ELECTRICAL SPECIFICATIONS Total power consumption: 60 kW

Sąlyga: labai geros būklės (naudotas), kuro tipas: elektrinis, spalva: žalia, Gamybos metai: 2015, veikimo valandos: 25 987 h, Year of manufacture: 2015 Unladen weight: 30,000 kg Mast length: 13 m Technical condition: very good Optical condition: very good Price: On request Serial number: 825.7.2315 Please contact Ferdinand Pater for further information. Color: Green Mast length: 13 m Stock No. D19 Machine Make: Sennebogen Model: 825AE-D Series Weight: 30 tons Iedpfx Abst Dlv Nekjik Serial number: 825.7.2315 Year of manufacture: 2015 Operating hours: 25,982 Engine: Electric motor 400V 110kW Boom: K13 boom configuration, 7.5 meter boom, 5.8 meter stick Cab: Maxcab Industry, hydraulic cab elevation, 2.7 m high with platform walkway at the cab, additional 320x270mm window in the cab floor Uppercarriage: Standard Sennebogen paint, centralized lubrication system, hydro-clean filter Undercarriage: Sennebogen ST20, 400x400 including 2x 5-ton additional counterweights, 1 meter additional pylon Lighting: Multiple (LED) lights on boom, stick and cab Extras: The machine is equipped with a brand new original Sennebogen slewing ring, serviced, clean, and ready for operation.

Sąlyga: naudotas, Gamybos metai: 1988, Technical details: Pressing force: 630 t Sheet thickness: 16 mm Total nominal force: 630 to Stroke: 30 - 150 mm Ring-tooth force: 320 t Iisdpfx Aevmht Hjbkjk Nominal force: 160 t Lower clamping area: 910 x 1050 mm Upper clamping area: 900 x 900 mm Installation height: 410 mm Ram adjustment: 120 mm Sheet width: 40 - 450 mm Sheet thickness: 0.5 - 16 mm Feeding length: 1 - 1000 mm Total power requirement: 100 kW Approx. machine weight: 28 t Space requirements approx.: 4.50 x 2.20 x 2.80 m Fineblanking press with: - Straightening device

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 6 898 h, mašinos/transporto priemonės numeris: 2253736, Įranga: hidraulika, kabina, visų varančiųjų ratų pavara, Recently received a new slewing gear and starter motor. Invoices available. For further details, please refer to the type plate. Iodpfswb Eq Dex Abkjik