Smulkus tuščiaviduris presas

FEINTOOL GKP F 160

Būklė: paruoštas naudoti (naudotas), The machine is in very good condition and can be inspected on site. Technical Data – Grinding Machine Working area (mm): Height x Length x Depth 80 x 110 x 55 Motor power (kW): 0.5 Spindle speed (rpm): 5000 Dsdpowvgidefx Af Ajcg Feed rate (mm/min): 150 Table load (kg): 20 Control system: BOSCH Accuracy: 0.005 mm, read via CNC, template grinding ratios 1:10, 1:20, or 1:50, suitable for coarse grinding. If you have any further questions, please feel free to contact me.

Būklė: naudotas, Manufacturer: CINCINNATI Djdpfxowrpyko Af Aecg

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Būklė: naudotas, Gamybos metai: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: mm Workpiece height: 60 mm Total power requirement: 50 kW Machine weight approx.: 7,000 kg Space requirement approx.: m DISKUS Vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of construction: 1969 Serial no.: 6672 --- Grinding wheels - diameter x bore per side: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc outside Ø: 810 mm Dsdpfx Aet Hw N Hsf Aecg Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Vertical quill adjustment per side: approx. 150 mm Hydraulic infeed pulses for depth feed: 0.0025 - 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed per side: (24 m/s) / 765 rpm Grinding spindle drive per side: 22 kW each Total drive: approx. 50 kW/380 V/50 Hz Total weight: approx. 7,000 kg Accessories / Special Equipment: • Workpiece rotary device for round transport discs with apertures for inserting the parts and with automatic ejection of finished parts down a chute into a transport box. • IONIC measuring control no. 9 So with measuring probe for finished workpiece height and, if necessary, with automatic hydraulic grinding wheel infeed. • Stepless speed regulation of the rotary device according to grinding dimensions and workpiece. • Manual infeed of grinding wheels via corresponding buttons. • hydraulically swivelling dressing device (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and with automatic repositioning to effective workpiece thickness after dressing = high time savings, can be triggered manually or by timer. • Ammeter displays for both grinding spindle drives. * Central lubrication, • Mechanical height control of workpieces with machine shutdown if overheight is detected. • Free-standing control cabinet, separate hydraulic unit, separate large band filter unit, various grinding wheels, various transport discs, etc. This machine is especially suitable for simultaneous, plane-parallel grinding of workpieces in large series. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Condition: good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naudotas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Table bore diameter 75 mm Stroke rate 355 – 630 strokes/min Feed range 0.008 – 0.4 mm/stroke Required space approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981 Dcsdetycg Sjpfx Af Asg

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Naudota dantračių šlifavimo staklė Niles ZSTZ 630i. Staklės visiškai veikiančios, pageidaujant galima atsiųsti vaizdo įrašą. Dedpexzfugjfx Af Ajcg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 107.44.00.407, X ašies eiga: 800 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 500 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, ruošinio svoris (maks.): 500 kg, bendras aukštis: 3 200 mm, bendras plotis: 3 200 mm, stalo plotis: 600 mm, stalo aukštis: 2 400 mm, stalo ilgis: 600 mm, sukimosi greitis (min.): 50 aps./min, sukimosi greitis (maks.): 20 000 aps./min, bendras svoris: 10 000 kg, veleno greitis (maks.): 20 000 aps./min, ašies variklio galia: 15 000 W, ašies skaičius: 1, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, MIKRON UCP 800 Duro, pagaminta 2018 metais, yra aukštos našumo penkiaašė apdirbimo centras, aprūpintas Heidenhain iTNC 530 valdymo sistema. Staklės turi 800 x 650 x 500 mm (X/Y/Z) poslinkius ir C ašį su 360° begaliniu pasukimo diapazonu. Įrengtos NCD 150 PL ir NCD 200 PL spindelių/adapterių tipai su HSK-E63. Pavaizduota stalų sistema šiuo metu nėra sumontuota. Į komplektaciją įeina drožlių transporterio sistema, aušinimo skystis su filtru ir visa dokumentacija. Staklės paruoštos pakrovimui ant sunkvežimio ir naudotos minimaliai. Eksploatacijos laikas: Valdymo įjungta: 30.064 h, Staklės įjungtos: 10.322 h, Programos vykdymas: 4.159 h, Pavaros įjungtos: 7.331 h, Spindulio sukimas: 4.231 h. Staklės prijungtos prie elektros ir bet kada gali būti pademonstruotos. Dedpjx D Ux Tefx Af Aecg

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 690 mm, veleno skylė: 150 mm, tekėjimo skersmuo: 1 040 mm, tekinimo skersmuo virš viršutinio vežimo: 690 mm, centro aukštis: 500 mm, plotis centre: 2 000 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 160 mm, Z ašies eigos atstumas: 380 mm, strypo praėjimas: 55 mm, Centre height: 500 mm Distance between centres: 2,000 mm Maximum turning diameter On cross slide: 690 mm Over bed: 1,040 mm In gap: 1,070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of faceplate: 320 mm CARRIAGE Bed guide length: 1,020 mm Cross slide travel: 640 mm Top slide travel: 360 mm SPINDLE Spindle nose: ASA 15'' Spindle bore diameter: 150 mm Front bearing size NN: 200/310/82 mm Rear bearing diameter NNU: 190/260/69 mm Internal Morse taper in reduction bush: No. 6 Spindle speeds: 24 Speed range: 4–800 rpm THREAD CUTTING Number of thread types: 398 Metric threads: 0.5–224 mm Module threads: mod. 0.25–11 Whitworth threads: tpi 56–1/8 Diametral pitch (DP): 112–1/4 FEEDS Number of feeds: 108 Longitudinal, cross, and top slide feeds: 0.05–22.4 mm/rev RAPID TRAVERSE Longitudinal, cross, and top slide rapid traverse: 2,500 mm/min Longitudinal return: 5,000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Steady rest passage over bed: 140–500 mm Dcodpeyhhuwofx Af Aog Steady rest passage over carriage: 40–350 mm ADMISSIBLE WEIGHT Overhung: approx. 1,500 kg Between centres without steady rest: approx. 5,000 kg Between centres with steady rest: approx. 6,000 kg Machine weight: approx. 7,800 kg

Gamybos metai: 1992, būklė: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Dcodpfx Aet Hw Nasf Ajg Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Dcedpfxot Hww Do Af Asg Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice