Suoliukas gręžtuvas

FEHLMANN P18S

Sąlyga: naujas, Table length: 1200 mm Table width: 1200 mm Table height: 900 mm Table load capacity: 3000 kg Machine weight approx.: 0.32 t Bdjdpfx Aod Iinfodmjk Dimensions (L x W x H): 1.2 x 1.2 x 0.9 m Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Plasma nitriding provides a hard surface layer. Height adjustable from approx. 880 to 980 mm Base reinforced with ribs for added strength. Including floor bearing Accessories optional!!!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 500 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 160 mm, X ašies eiga: 500 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 480 mm, veleno greitis (maks.): 9 000 aps./min, X ašies padavimo greitis: 2 m/min, Y ašies padavimo greitis: 2 m/min, padavimo greitis Z ašis: 1 m/min, veleno greitis (min.): 100 aps./min, plunksnos brūkšnys: 160 mm, stalo plotis: 320 mm, stalo ilgis: 880 mm, X-500, Y-250, Z quill stroke 160 mm, W axis (machine head travel) 480 mm, table 880 x 320 mm, max. load 320 kg, spindle taper SF 32, 100–9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124. Extensive accessories included. Bdedoq R Rb Hopfx Admek

Sąlyga: geras (naudotas), Gamybos metai: 2010, Centre Lathe Manufacturer: JET Type: GHB-1330 Year: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Bdedpfx Adsqwgzqjmjk Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm Machine in good condition, from a training workshop. Machine documentation available.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, veleno skylė: 83 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 570 mm, tekinimo skersmuo virš viršutinio vežimo: 340 mm, quill skersmuo: 80 mm, šilko eigos atstumas: 200 mm, bendras svoris: 3 200 kg, įvorės išorinis skersmuo: 250 mm, Įranga: sūkių greitis be galo kintamas, The machine is in very good condition. Bjdjwxw S Iopfx Admjdk Available immediately! Can be tested under power.

Sąlyga: naujas, Optimum OPTIdrill D 23Pro (400 V) Promotional Set Bench Drill 3003020SET With V-belt drive. TECHNICAL DATA Dimensions and Weights Length (product): approx. 680 mm Column diameter: 73 mm Width/Depth (product): approx. 350 mm Height (product): approx. 1015 mm Weight (net): approx. 63.5 kg Drilling Capacity Drilling capacity steel (S235JR): 25 mm Continuous drilling capacity steel (S235JR): 20 mm Drill Table Drill table working surface length: 280 mm Drill table working surface width: 245 mm Drill table T-slot size: 12 mm Drill table rotation: 360° Drill table tilt: 45° Bsdpfx Adjt N Ivvomodk Distance spindle - drill table max.: 425 mm Speed Range Speed range: 200 – 2440 rpm Number of speed steps: 12 Electrical Data Drive motor power: 0.75 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine Base Distance spindle - machine base max.: 618 mm Machine base working surface length: 240 mm Machine base working surface width: 250 mm Machine base T-slot size: 16 mm Machine base number of T-slots: 2 Machine base T-slot spacing: 170 mm Spindle Quill stroke: 80 mm Spindle taper: MT2 Throat: 180 mm SCOPE OF DELIVERY Keyless drill chuck 1 - 16 mm Morse taper MT2/B16 T-slot nuts Machine vice BMP

Sąlyga: naudotas, TECHNICAL DATA - Max. swing over bed: 270 mm - Max. swing over cross slide: 130 mm - Distance between centers: 440 mm - Spindle nose: CAMLOCK D1-3' - Max. bar diameter: 28 mm - Power: 7.5 kW - Spindle speed: 0–5000 rpm with variator - Travel (X x Z): 180 x 400 mm - Feed rates: 0–5000 mm/min with variator - Rapid traverse: 7500 mm/min Bedpfsuhcarjx Admsdk - Power supply: 3-phase 380V 50Hz, 14 kW - Dimensions: 1700 x 1226 x 1660 mm - Weight: 1415 kg EQUIPMENT/ACCESSORIES - FANUC 20-T CNC controller - Multifix 'A' quick-change tool turret - SCHAUBLIN B32 collet chuck - Tailstock with handwheel - Coolant tank with pump

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. Bdjdpfx Adotyyn Hsmok 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Bdjdpfertd Uwex Admek Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Sąlyga: naujas, Gamybos metai: 2025, The drill press, thanks to its rigid construction, ensures perfect drilling quality. The tilting table allows for a wide range of machining operations. The machine is equipped with an electronic rotation indicator, drilling depth gauge, and a movable head. A 125 mm vice is included. The model is fitted with stepless spindle speed adjustment. Machine Description stepless spindle speed adjustment LED lamp worktable and base equipped with T-slots robust, torsion-resistant column tilting worktable from -45° to +45° drilling depth stop with scale Bdjdpfx Aeridnvjdmok Technical Specifications Maximum drilling diameter: 25 mm Maximum chuck diameter: 16 mm Distance from spindle axis to column: 215 mm Spindle taper: MT3 Spindle travel: 150 mm Column diameter: 80 mm Motor: 400 V / 50 Hz / 1500 W Gearbox: YES Base dimensions: 580 x 415 mm Table dimensions: 356 x 356 mm Overall height: 1710 mm Spindle speed range (50 Hz): 180–2000 rpm Table travel range: 600 mm Packed dimensions (L/W/H): 1510 x 690 x 256 mm Weight: 95 kg

Sąlyga: naujas, For grinding HSS and carbide engraving cutters, as well as mills with single or multiple flutes in various profiles such as radius cutters or cutters with a negative conical angle. The universal index head is adjustable to 24 positions, allowing for any required profile angle to be achieved; free rotation of 360° or in 10° increments is possible for grinding end mills, twist drills, and lathe tools. Simply replace the attachment on the index head for different tool types—no complex assembly required. Standard accessories 3 collets: Ø4, Ø6, Ø8 mm Grinding wheel ×1 Twist drill grinding attachment ×1 End mill grinding attachment ×1 Lathe tool grinding attachment ×1 Bdjdpfxeq E Ry Ho Admok Options Collets: Ø3, Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. collet capacity Ø3 - Ø18 mm Max. grinding diameter Ø18 mm Taper angle 0~180° Relief angle 0~45° Negative angle 0~25° Speed 5300 rpm Grinding wheel Ø100 x 50 x Ø20 mm Motor 375 W Dimensions 550 x 460 x 490 mm Weight 51 kg