Vertikalus apdirbimo centras

Fanuc ROBODRILL α-T14iAL

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 28820005482, X ašies eiga: 1 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 500 mm, X ašies padavimo greitis: 50 m/min, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 50 m/min, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, Įranga: dokumentacija / vadovas, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not documented in writing, but we assume it is from 2001. Please refer to the attached images for further details. We are, of course, available at any time to answer any questions you may have. The machine can be inspected under power by appointment. Collection with a suitable truck is to be organized by the buyer. Isdpfx Agsvx N Shegjtn Dismantling and removal of the machine can be carried out either by the buyer or by us (at an additional cost of €1,500).

Būklė: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Itedpfxsvvtpxs Aggsn Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Ijdeh Nypfspfx Aggjtn

Būklė: geras (naudotas), Gamybos metai: 2018, veleno greitis (maks.): 3 500 aps./min, bendras svoris: 6 000 kg, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Pagrindiniai parametrai: Valdiklis: FANUC 0iD/31iA Griebtuvas: SAMCHULLY 10" Veleno skylė: 86 mm Su apsauginiu vamzdžiu: 78 mm Revolverinė galva: 12 pagrindinių pozicijų, 12 antrinių pozicijų, BMT65 jungtis, Programuojama hidraulinė uodega: MT5 Pagrindinio veleno galia: 22 kW S1 max=3500 aps./min Gyvos įrankio galia: 5,5 kW S2 max=5000 aps./min X ašies eigos diapazonas: 260 mm Z ašies eigos diapazonas: 830 mm Y ašies eigos diapazonas: ±52 mm (104 mm) C ašis Maksimalus tekinimo ilgis: L=760 mm Didžiausias tekinimo diametras: D=376 mm Greitas poslinkis: 30 m/min Ijdpfewtg Inox Aggetn Automatinis įrankio matavimas su zondo svirtimi Svoris: 6000 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Max. profile length for 3-sided machining: 7,600 mm, Y-axis: 845 mm, Z-axis: 620 mm, max. traverse speed X-axis: 63 m/min, max. traverse speed Y-axis: 60 m/min, max. traverse speed Z-axis: 60 m/min, swivel range A-axis: -90°, 0°, +90°, max. spindle speed: 24,000 rpm, spindle power: 11 kW S1, machining directions: top/front/rear/left/right, positioning accuracy: 0.1 mm/m, tool holder: HSK-63F, disc cutter diameter: 120 mm, saw blade diameter: 180 mm, software: eluCam, connected load: 30 kVA, compressed air connection: 7 bar, compressed air consumption: approx. 180 l/min, length: 10,775 mm, width: 3,430 mm, height: 2,950 mm, weight: 4.9 t, operating hours: 1,550 h, standby: 6,300 h. Accessories: length measurement for profile bars, HSK-63F tool holder set, five collet chucks, eight collets, 2-layer length processing with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for order/operation input and documentation. Regularly serviced, on-site inspection possible. Itjdpfx Aezbb Rroggen

Būklė: labai geros būklės (naudotas), Darbo eigos: 860 x 550 x 600 mm Stalo dydis: 1000 x 560 mm Veleno tvirtinimas: SK40 Veleno apsukos: 10 000 aps/min Įrankių keitiklis: 24 pozicijos Valdiklis: HEIDENHAIN iTNC-530 Iodpfx Agezbrrtjgotn Veleno vidinis aušinimas 3D matavimo jutiklis Įrankio ilgio matavimo įrenginys Įvairūs priedai MARCELS MASCHINEN CH

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), X ašis: 2500 mm, Y ašis: 1270 mm, padėties nustatymo greitis X/Y ašyje: 80/90 m/min, sinchroninis ašių greitis: 100 m/min, štampavimo galia: 200 kN, revolverio stočių skaičius: 51, maks. įprasto plieno storis: 3,2 mm, maks. medžiagos svoris su F1/F4 padėties greičiu: 50/150 kg, padėties nukrypimas: +/-0,1 mm, X ašies smūgiai/min: 350, Y ašies smūgiai/min: 260, maks. smūgio eiga: 42 mm, maks. padavimo greitis X/Y ašyje: 80/60 m/min, revolverio greitis: 30/min, suslėgto oro poreikis: 500 l/min, darbinis oro slėgis: 5 bar, prijungimo galia: 19 kVA, ilgis: 4165 mm, plotis: 5120 mm, aukštis: 2082 mm, aukštis su veidrodžiu: 3028 mm, svoris: 13 t, darbo valandų skaitiklis: 4531 h, reguliariai prižiūrėta gamintojo, su dokumentacija, be štampavimo įrankių. Galima apžiūra vietoje. Itsdpfx Agjza E S Degon

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, X-axis: 620mm, Y-axis: 520mm, Z-axis: 460mm, B-axis: -50° to +110°, C-axis minimum increment: 0.001°, Distance spindle nose to table surface (B/C axes): 140–600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots (number/width/spacing): 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000 rpm, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feedrate: 1–10m/min, rapid traverse B/C axis: 25/min, tool holder: MAS BT-40, number of tool stations: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa/500l/min, coolant tank capacity: 420l, total connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, control operating hours: 9380h, machine-on: 9501h, program run: 3141h, hydraulics: 8371h, axes: 1863h, spindle S1: 2377h. Equipment: Roller guides in all 3 linear axes (Taiwan make), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air-conditioning for electric cabinet, chip conveyor (scraper type), chip bin, work area rinsing device, tailstock support for rotary table, roller guides in all 3 linear axes, CE compliant version, through-spindle coolant (IKZ), linear scales X/Y/Z Heidenhain, workpiece measuring probe, transformer, oil mist extraction, collision protection software, spindle thermal compensation, with documentation. On-site inspection possible. Isdpfozavyfex Aggstn

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. No.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Controller: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine No.: 50XXXX X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm Iodpfex Hn D Rsx Aggotn Working spindle torque (at 25% DC): 242 Nm Tool holder: SK 40 Number of tool stations in magazine: 54 Tool magazine equipped with: 80 pcs. Spindle speed: 10,000 rpm Main spindle drive power: 17 kW High-pressure pump: 50 bar Main spindle speed range: 10,000 rpm Number of pallets: 2 Pallet size (LxW): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle hours: 7,000 h Operating hours: 14,000 h Set-up stations: 4 x 90° Hydraulic pressure: 200 bar Additional information: - Machine has been measured - Geometry is in excellent (1A) condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in work area - Central cooling unit for motor spindle and electrical cabinet - Operator panel at the set-up station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by arrangement.

Būklė: naujas, Gamybos metai: 2022, SPECIAL PRICE, stock machine year 2022, condition: new List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables stepless mitre cuts from -45° to +30° (pivot range: 45° to the left, 60° to the right). Technical Data: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Blade speed: 40 and 80 m/min ● Saw blade: 2710 x 27 x 0.9 mm Ijdpjmftv Rjfx Aggetn Standard Equipment: ● Powerful band drive ● Stepless feed adjustment from the control panel ● Manual workpiece clamping, movable vice with dovetail guide ● Easy mitre adjustment by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop (without scale) --> Also available in various sizes and configurations!