Polių gręžimo mašina

FAMUP RAG 35

Sąlyga: naudotas, Gamybos metai: 1971, Drilling capacity in steel/cast iron: 23 mm Spindle taper: 3 MT Throat depth: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 – 1,180 rpm Klodpsrz Nqaofx Af Iol Feeds: 0.1 / 0.6 / 0.25 mm Drive motor: 380 V, 1.25 / 2.15 kW Space required: 850 x 400 x 1,770 mm Weight: 280 kg

Sąlyga: naujas, Pjovimo skersmuo 235 mm Pjūklo juostos matmenys 2645 x 27 x 0,9 mm Pjovimo plotis 280 x 190 mm Pjovimo greitis 45/90 m/min Pjovimo našumas 60° - apvalus 120 mm Pjovimo našumas 60° - kvadratas 120 mm Pjovimo našumas 45° - apvalus 190 mm Pjovimo našumas 45° - kvadratas 170 mm Kljdop Scqyepfx Af Iol Prijungimo įtampa 400 V Bendras galios poreikis 1,1 kW Mašinos svoris apie 290 kg Matmenys I x P x A 1,2 x 0,8 x 1,2 m Dvigubo kampo juostinis pjūklas -Kampiniai pjūviai iki 60° kairėje ir 45° dešinėje -Spaustukas su greito užveržimo įtaisu -Juostos įtempimo kontrolė -Elektrinis aušinimo automatas

Sąlyga: naujas, Gamybos metai: 2025, CORMAK HBS275 Band Saw for cutting pipes, profiles, and rods is widely used in all locksmith workshops where precision, quality, and cutting speed are paramount. The model is equipped with a swiveling arm adjustable from 0-60°, with saw guides based on carbide inserts. The robust frame design ensures precise and quiet operation. Machine Features The horizontal metal band saw with a swiveling arm allows cutting perpendicular to the axis of the material as well as at any angle between 0 and 60°. The material can be fed manually or with any mechanical device, while the tool feed is fully automatic. The blade guides are fitted with special carbide plates and bearings, significantly enhancing blade guidance, lifespan, straightness, and the quality of the cut. Carbide guidance greatly reduces both machine and blade wear. The machine is equipped with a high-efficiency coolant pump in a closed-loop system. The saw arm, made of a single cast-iron piece, combined with a 27 mm wide saw blade, allows for repeated series cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and features quick clamping. Blade guides fitted with hard metal (carbide) plates and a rolling bearing system ensure cutting precision and straightness—carbide-guided blade supports are crucial for quality results. The arm is equipped with an automatic blade tension sensor and is tilted at 25 degrees to prolong blade life. A cleaning brush, mounted underneath the arm, ensures blade cleanliness and effective operation. Power is transmitted through a worm gear drive. A cast-iron work table with a swiveling arm and a separate control panel is attached to the base. During cutting, the main movement is the saw blade’s feed, and the arm’s descent serves as the feed direction. The descent (cutting) speed is regulated by a hydraulic cylinder. Feed speed is controlled from the saw’s control panel. The operator can select one of two blade speeds: 37.5 or 75 m/min. In the lower arm position (after finishing the cut), the blade drive shuts off automatically. Safety is ensured by blade guards and micro-switches stopping the motor once the cutting cycle ends or if any guard is opened. Additional protection cuts off the machine automatically if the blade breaks. The drive is transmitted via a worm gear motor. The motor has a thermal fuse, protecting it from overheating during operation. Technical Data TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (WITH RAISED ARM) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg CUTTING CAPACITY Klsdpfeudi Unox Af Iol Angle | Round | Flat | Square ---|---|---|--- 0° | ø220 | 260 x 140 | 200 x 200 45° R | ø160 | 160 x 140 | 160 x 160 60° R | ø100 | 120 x 100 | 100 x 100 Price does not apply to machines purchased in Poland.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Su VE 320 elektronika Gamybos metai: 1992 Gręžimo pliene galia: 32 mm Sriegimo įrenginys Mechaninis padavimas be pakopų per potenciometrą Stalo tvirtinimo paviršius: 500 mm x 360 mm Gręžimo gylio reguliavimas su skaitmeniniu ekranu Apsauginis įtaisas Gręžimo gylis: 150 mm Veleno tvirtinimas: MK 3 Veleno apsisukimai 140 aps./min. – 1400 aps./min. be pakopų su skaitmeniniu ekranu Gręžimo stalo apšvietimas Ksdsxc Iw Hjpfx Af Iell

Sąlyga: naudotas, Drilling capacity in steel (diameter): 32.0 mm Drilling capacity in cast iron: 36.0 mm Throat depth: 280 mm Drilling stroke: 150 mm Spindle speed: 80 - 1400 rpm Table size: 400 x 550 mm Morse taper: MT 3 Feed rate: 0.1-0.2-0.3 mm/rev Kedpfx Ajxabv Dof Ioll Total power requirement: 1.1 / 2.0 kW Machine weight approx.: 350 kg Dimensions (L x W x H): 800 x 600 x 1900 mm Equipment: - Pillar drilling machine – drive: V-belt - Automatic spindle feed (0.1/0.2/0.3 mm/rev) - Pole-changing drive motor - Work table with T-slots - Height adjustable via hand crank - Machined base plate with T-slots - Adjustable drilling depth stop - Connection cable + 16A plug

Sąlyga: naudotas, Drilling capacity in steel (diameter): 40 mm Throat depth: 360 mm Drilling stroke: 135 mm Spindle taper: MK 4 Table size: 630 mm Feeds: yes, mm/rev Spindle speed: 120 – 1120 rpm Total power requirement: 2.4 kW Kledpfx Asm Rlavjf Iel Machine weight approx.: 0.9 t Dimensions (L x W x H): 1.2 x 0.8 x 2.75 m

Sąlyga: naudotas, Gręžimo galia pliene (skersmuo): 40 mm Išnešimas: 385 mm Gręžimo eiga: 200 mm Veleno tvirtinimas: MK 4 Sukimosi greičio diapazonas: 61-1169 aps./min. Stalas: 470 x 560 mm Staklių svoris apie 700 kg Klsdsx H Ak Sjpfx Af Iel Reikalingas plotas apie 900x800x2000 mm Įranga: - automatinė pastūma - Alzmetall daliklis - staklinis spaustuvas - sukimosi kryptis į dešinę/į kairę

Sąlyga: naudotas, Gamybos metai: 1995, Gręžimo našumas pliene (skersmuo): 40 mm Kljdpfx Ajxz Hg Rjf Ijl Išsikišimas: 230 mm Gręžimo eiga: 130 mm Kotus: MK 4 MK Stalo matmenys: 400 x 315 mm Sūkių diapazonas: 105 - 1257 aps./min Bendra galia: 2,55 kW Staklių svoris: apie 0,35 t Išmatavimai (I x P x A): 0,8 x 0,6 x 1,95 m

Sąlyga: naudotas, Gamybos metai: 2000, Gręžimo galia plienas / ketaus 40, 50 mm Iškyša 280 mm Gręžimo eiga 125 mm Veleno tvirtinimas MK MK 4 Kedpfx Afexyab Se Ioll Veleno sukimosi greitis 20–2000 aps./min. Stalo eiga 500 mm Mašinos svoris apie 275 kg Stalo dydis 420 x 340 mm Atstumas tarp darbinio veleno ir tvirtinimo paviršiaus maks. 500 mm Darbinė įtampa 400 V Jungiamoji galia 0,75 kW