Lakštinio metalo apdorojimo mašina

Ernst NEPTUN EBB1500

Gamybos metai: 2002, būklė: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. Fpsdpst Hw Shjfx Actji 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 55 771 h, lazero valandos: 35 157 h, lazerio galia: 3 200 W, maks. lakšto storis: 20 mm, plieno lakšto storis (maks.): 20 mm, aliuminio lakšto storis (maks.): 8 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 150 mm, pozicionavimo greitis: 140 m/min, pozicionavimo tikslumas: 0,02 mm, paskutinio kapitalinio remonto metai: 2024, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 150 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, dokumentacija / vadovas, Lazeris veikia, galima apžiūra ir išbandymas. Reguliariai prižiūrėtas, geros techninės būklės. Visi veidrodžiai buvo pakeisti 2024 metais. Fpjdpfx Asv Hxbbectoi

Būklė: beveik kaip naujas (parodų įrenginys), veikimo valandos: 170 h,

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Fpodpsfxpbmofx Actei

Gamybos metai: 1965, būklė: naudotas, mašinos/transporto priemonės numeris: 4447, Working width: 2500 mm Fjdjb H Ibuspfx Actspi Sheet thickness: 4 mm Throat depth: 70 mm Back gauge: 520 mm Drive power: 380 V, 6.3 kW Space requirement: 3200 x 2300 x 1270 mm Weight: 4600 kg

Būklė: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large workpieces. Working width: 1150 - 1350 mm Fjdpfxsnah Tdo Actepi Maximum part weight: 500 kg Wide belt grinder with abrasive belt length: 2620 mm Standard equipped with vacuum holding system, optionally with magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface and reduces consumable costs due to the longer belt service life. Due to the modular design of the machine, it is possible to offer the optimal configuration for the customer’s processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing operations. Please contact us for further information and images via email at mail(at) or

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2000, bendras svoris: 1 000 kg, bendras aukštis: 3 500 mm, keliamoji galia: 2 500 kg, gerklės gylis: 5 000 mm, darbinio aukščio: 3 000 mm, Sertifikuota DGUV iki: 06/2025, Įranga: dokumentacija / vadovas, Column and Wall-Mounted Slewing Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoists – Multiple Systems Available For sale are several column and wall-mounted slewing crane systems from the manufacturers Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The cranes feature load capacities ranging from approx. 50 kg to 2,500 kg and are suitable for use in workshops, production sites, assembly areas, as well as in internal material handling and logistics. Fsdpfxeyt Hc Dj Actspi Some systems are designed as classic column slewing cranes with single arms, while certain units are configured as double-arm column slewing cranes and can therefore serve two work areas at the same time. The cranes are equipped with electric chain hoists and trolleys, and are operated via pendant controller units. Each system can be purchased individually. Inspection available by appointment. Taucha Column Slewing Crane – Load Capacity 2,500 kg Heavy-duty column-mounted slewing crane with floor-mounted steel column and jib arm for industrial lifting and assembly operations. Taucha Column Slewing Crane – Load Capacity 2,000 kg Column slewing crane with pivoting jib for material handling in production and assembly environments. Taucha Column Slewing Crane – Load Capacity 1,600 kg Industrial crane with column installation and slewing jib, suitable for medium to heavy loads. Taucha Column Slewing Crane – Load Capacity 1,250 kg Column crane with jib arm and trolley for precise material movement. Taucha Column Slewing Crane – Load Capacity 1,000 kg Column crane with electric chain hoist and pivoting jib for assembly areas. Taucha / Liftket Column Slewing Crane – Load Capacity 1,000 kg Column crane with Liftket electric chain hoist, suitable for industrial lifting applications. Taucha Column Slewing Crane – Load Capacity 800 kg Column slewing crane with jib arm and trolley for workshop and production facilities. Taucha Column Slewing Crane – Load Capacity 800 kg (Double Jib) Column slewing crane with two opposite jib arms, suitable for servicing two workstations. Taucha / Liftket Column Slewing Crane – Load Capacity 500 kg Column crane with electric chain hoist for lighter lifting applications. Liftket Column Slewing Crane – Load Capacity 500 kg Column crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Slewing Crane – Load Capacity approx. 315 kg Wall-mounted slewing crane with Demag electric chain hoist, suitable for workplaces with limited space. Taucha Column Slewing Crane – Load Capacity 250 kg Compact column slewing crane for light loads. Taucha Column Slewing Crane CS KD 250-6 – Load Capacity 250 kg Column slewing crane with pivoting jib and electric chain hoist. Liftket Column Slewing Crane – Load Capacity 250 kg Column crane with Liftket electric chain hoist for assembly operations. Taucha Column Slewing Crane – Load Capacity 200 kg Column crane for light material handling. Taucha Column Slewing Crane – Load Capacity 125 kg Light-duty column slewing crane for small components and tools. Taucha Column Slewing Crane – Load Capacity 100 kg Compact workshop crane for light-duty applications. Taucha Column Slewing Crane – Load Capacity 50 kg Very light-duty slewing crane for minor lifting tasks.

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) • Funnel-shaped air guidance to the extraction port Fpodpfxjfyadbj Actei Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Gamybos metai: 2023, būklė: naujas, IMMEDIATELY AVAILABLE! Vibratory Finishing Machines with Separator The VKUE series machines can be used for surface finishing of metallic and non-metallic workpieces. These machines feature a large screening area, allowing for easy separation of workpieces from grinding media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control Fjdjn Smcljpfx Actspi - Frequency control - Dosing pump - Magnetic valve - Stand for control panel - Rinsing pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Būklė: naudotas, Gamybos metai: 2016, veikimo valandos: 851 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MN25724, darbinis plotis: 1 500 mm, X ašies padavimo greitis: 4 m/min, įvesties srovės tipas: trifazis, maks. lakšto storis: 50 mm, bendras ilgis: 1 300 mm, bendras plotis: 2 600 mm, bendras aukštis: 2 500 mm, bendras svoris: 2 600 kg, darbinio aukščio: 950 mm, ruošinio aukštis (maks.): 50 mm, ruošinio plotis (maks.): 1 500 mm, The ER 1500 E is a top-side, single-sided deburring machine equipped with the EdgeRacer carousel for precise processing of interior and exterior contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of over 300 m²/h, gentle surface processing—even for polished, brushed, and foil-coated sheets—and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the grinding heads can also be adjusted below roller table level. The roller conveyor ensures maximum energy efficiency, with processing costs typically less than €0.01 per square meter of sheet metal processed. Thanks to the reversing operation, sheets to be processed can be inserted and removed from the infeed side. Acquire the EdgeRacer deburring machine ER 1500 E as a demonstration unit with only 851 operating hours directly from the manufacturer. Fpedpsucw Dzofx Actsi