Lakštinio metalo šalinimo mašina

ERNST EM5N II + 2F

Working width / mm
Workpiece height / mm
/

Workpiece thickness: 1-70 mm
Min. workpiece length: 350 mm
Min. workpiece length with magnetic or vacuum conveyor: 80 mm
Band filter unit capacity Ab=900 approx. 350 l
Band filter unit capacity Ab=1400 approx. 400 l
Constant working height 1000 mm
Feed speed 2/4 m/min
Stepless feed speed 1.5-8 m/min
Operating voltage 400 VAC
Control voltage 24 V DC, 230 VAC
Frequency 50 Hz
Compressed air connection R 3/8"
Minimum compressed air pressure 5 bar
Minimum compressed air volume EMSN II +2F 10 Nl/min
Minimum compressed air volume EMSN II /L +2F 80 Nl/min
Total electrical connection See layout plan
Machine weight, working width 900 mm approx. 4,200 kg
Machine weight, working width 1400 mm approx. 5,100 kg
Machine weight, working width 1540 mm approx. 5,600 kg
Abrasive belt dimension, sanding drum AB=900 1,540 mm long x 900 mm wide
Abrasive belt dimension, sanding drum AB=1400 1,540 mm long x 1,400 mm wide
Abrasive belt dimension, sanding drum AB=1540 1,540 mm long x 1,540 mm wide

5. Technical Description
The machine works with a wet grinding process and must only be operated with a suitable grinding emulsion.

A band filter system is used to filter out the grinding dust generated from the emulsion.

The machine is equipped with an elastic sanding drum, which is used for surface grinding or burr removal. Two counter-rotating abrasive flap brushes, or alternatively stainless steel brush rollers, are then used for edge rounding. Two subsequent spring steel brushes are used to remove the oxide layer from the cut edges.

Within the machine, pressure rollers hold down the workpieces on the continuous conveyor belt, keeping the parts in position during the grinding process.

=> This results in a minimum workpiece length of 350 mm.

At the discharge end, there is an integrated drying unit to dry the workpieces before they exit the machine.

The machine is equipped with a continuous conveyor belt for workpiece transport.

Bjdeinwwzspfx Alwjll
An optional special version may include a vacuum suction system or a magnetic conveyor. This allows for processing of smaller workpiece sizes. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm² applies. For magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² applies.

All sanding and brush elements are fitted with nozzle tubes, which continuously spray the tools with emulsion, enabling the processing of aluminium and its alloys.

The grinding residue is carried away by the emulsion to the band filter unit and collected by a suitable filter fleece.


ERNST
Automatic sheet metal deburring machine with wet grinding system
Type EM 5 N/II/L + 2 F 1400
Year of manufacture: 2008, Serial no. 780063

Machine/Equipment:
Sheet metal deburring machine with wet grinding system for punched, laser-cut and nibbled parts made of various materials, featuring a flexible sanding drum and 2 flap brushes for particularly high edge rounding.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.