Dviguba kampinė pjūklas Emmegi Norma VIS

Emmegi Norma VIS

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 Cjdpfxswbh Ifj Aahepw ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.

Būklė: beveik kaip naujas (parodų įrenginys), FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package, standard from 1.5 m ➤ Fronius carriage ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator With this unit, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It features filler wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in bodywork applications. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further expanding the functions of the TPS unit. Cpsdjwbknbepfx Aahsw ----- IMMEDIATE DELIVERY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the unit? For clarification: we purchase nearly new used units, disassemble them, check everything thoroughly, replace any wear parts if necessary, and only after successful test welding do we release them for sale. "All" units are clean and have neither burn marks on the displays nor numerous burn holes or dents distributed over the unit! You buy from us an item that is presentable and does not look completely worn out! ►►►Will we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash upon personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the units on site and pay in cash. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – Fronius only, no other brands! We are experts with these units and never sell anything we are not familiar with.

Būklė: naujas, Gamybos metai: 2025, The shredder breaks down large, bulky pieces of polystyrene and EPS, as well as similar materials with a maximum bulk density of 30 kg/m³, into small pieces. In this process, the shredder reduces the volume by approximately 65%. This makes the machine ideally suited for use in industrial and craft businesses, as well as for wholesalers and retailers dealing in polystyrene packaging materials. Throughput capacity: Screen 10 mm: approx. 3 m³/h Screen 20 mm: approx. 8 m³/h Screen 30 mm: approx. 13 m³/h Screen 40 mm: approx. 18 m³/h Cpsdpfx Aoxlzkrsahew Screen 50 mm: approx. 23 m³/h Depending on the selected screen size, your polystyrene waste can be reduced in volume by a ratio of 3:1 simply through shredding. Custom solutions available upon request. VAT will be shown separately on the invoice. Shipping within Germany included (islands subject to surcharge). If you have any questions, please do not hesitate to contact us.

Būklė: naudotas, Gamybos metai: 2020, The shredder breaks down large, bulky pieces of polystyrene and EPS, as well as similar materials with a maximum bulk density of 30 kg/m³, into small pieces. In this process, the shredder reduces the volume by approximately 65%. This makes the machine ideally suited for use in industrial and craft businesses, as well as for wholesalers and retailers dealing in polystyrene packaging materials. Throughput capacity: Screen 10 mm: approx. 3 m³/h Screen 20 mm: approx. 8 m³/h Screen 30 mm: approx. 13 m³/h Screen 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Cjdpfxoxm T I So Aahepw Depending on the selected screen size, your polystyrene waste can be reduced in volume by a ratio of 3:1 simply through shredding. Custom solutions available upon request. VAT will be shown separately on the invoice. Shipping within Germany included (islands subject to surcharge). If you have any questions, please do not hesitate to contact us.

Būklė: naudotas, Gamybos metai: 1997, bendras ilgis: 7 230 mm, bendras plotis: 1 450 mm, bendras aukštis: 1 650 mm, Svoris: 1.935 kg Kaina: Pagal užklausą - Pagaminimo metai: 1997 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip Cpsdpfx Aoxwk Dxsahsw - CE sertifikatas: Ne - Serijos numeris: 970114 - Pagrindinio variklio galia [kW]: 4,5 - Didžiausias pjūklo disko skersmuo [mm]: 500 - Pjūklo disko skylės skersmuo [mm]: 30 - Maks. veleno apsukos [aps./min]: 2800 - Transportavimo matmenys: 7230 mm x 1450 mm x 1650 mm (i x p x a) - Transportavimo svoris [kg]: 1935 kg - Transporto paketai [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir atpirkimas galimi bet kada visų pramonės sričių įrangai Glenn Smeets

Būklė: naudotas, Electric contact length stops for Mubea and Peddinghaus in various lengths. The price is for one Mubea length stop, 1000 mm. Cpedpfef Srn Rex Aahsw

Būklė: geras (naudotas), Gamybos metai: 2009, kėlimo aukštis: 8 000 mm, kuro tipas: elektrinis, spalva: geltonas, Drivetrain Drive: Wheel Weights Unladen weight: 2,160 kg Functionality Lifting capacity: 230 kg Working height: 10.00 m CE marking: yes Maintenance, History, and Condition Number of owners: 1 Technical condition: good Visual condition: good Additional Information Delivery terms: EXW Transport dimensions (L x W x H): 2.46 x 0.81 x 2.18 m Last inspection: 2025-10-13 Country of manufacture: FR Further information Please contact Rothlehner Arbeitsbühnen GmbH for further details. Working height: 10.00 m Platform load: 230 kg Platform size: 2.30 m x 0.80 m Platform extension: 0.92 m Own weight: approx. 2,160 kg Turning radius: 2.50 m (outer) Climbing ability: 23 % Passage width: 0.81 m Passage height: 2.18 m Minimum passage height: 1.33 m Overall length: 2.46 m Ground clearance: 0.13 m Battery drive 24 V, fully automatic charger 2-wheel drive, max. 3.00 km/h Inclination sensor 2° Operating hour meter Charge indicator Solid rubber tires, grey, 38 x 13 x 5 cm For indoor use The unit will be technically serviced and is fully functional; the safety inspection will be updated. All documents are available. Service and spare parts supply is ensured. Why don’t we state prices? Our prices depend partly on customer requirements regarding the optical and technical level of refurbishment, or on optional special features. These individual configuration options are highly valued by many customers. We are happy to answer all your questions in a personal consultation. Cpedpfx Aasxpcztohow Please include your telephone number with your inquiry so our staff can provide you with comprehensive advice.