CNC apdirbimo centras

Emco Famup Emcomill E900

Sąlyga: geras (naudotas), Čia siūlomas apdirbimo centras, pagamintas Emco Famup. Rbedpfx Ajxrvg Ueh Hst

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle - Standard spindle 15,000 rpm - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct Rbjdpfox Eh Iqex Ah Hst - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: naudotas, Gamybos metai: 2005, Techninė informacija: x eiga: 750 mm y eiga: 406 mm z eiga: 508 mm Rjdpfox Iwr Tjx Ah Hobt Mašinos svoris: apie 4 t Grąžto veleno apsukos: 12 000 aps./min. HAAS VF-2 yra trijų ašių apdirbimo centras, sukurtas preciziškumui, dideliam tikslumui ir patikimumui.

Sąlyga: naudotas, Gamybos metai: 2011, Sūkurio skersmuo 460 mm Sūkurio ilgis 795 mm Valdymas MORI SEIKI M730 BM Sūkurio skersmuo virš planinio slystuvo 590/360 mm Veleno skylė 80 mm Eigos X/Z: 260/795 mm Darbo valandos 19 552 h Apdirbimo laikas 10 704 h Rbedpjxwzfyefx Ah Hot Veleno variklis 18,5 kW Bendras galios poreikis 40 kVA Staklių svoris apie 6,4 t Užimamas plotas apie 3.994 x 3.056 x 2.187 m DMG MORI Priedai: Griebtuvas Ø250 mm. Antrinės ašies griebtuvas Ø170 mm. Laikiklis HAINBUCH Drožlių transporteris Ištraukimo sistema Strypų padavėjas Hydrafeed Multiservo mod MSV maks. strypo ilgis 1.600 mm Detalės laikiklis ašinis Puiki būklė, galima apžiūrėti sujungus su elektros tiekimu.

Sąlyga: naudotas, Gamybos metai: 2007, Swing diameter: 300 mm Turning length: 600 mm Control: FANUC 18i-TB Swing diameter over cross-slide: 230 mm Travel X1: 165 mm Travel Z1: 700 mm Travel X2: 190 mm Travel Z2: 720 mm Travel Y: +/- 50 mm Main spindle bore: 76 mm Main spindle speed: 5,000 rpm Main spindle motor: 22 kW Spindle torque: 208 Nm Sub-spindle bore: 76 mm Sub-spindle speed: 5,000 rpm Sub-spindle motor: 22 kW Spindle torque: 208 Nm Turret: 2 x 12 stations Number of driven tool stations: 2 x 12 Driven tool speed: 5,000 rpm Torque (driven tools): 47 Nm Driven tool motor: 5.5 kW C-axis resolution: 0.001° Rapid traverse (X + Z axes): 20 / 40 m/min Rapid traverse (Y axis): 7.5 m/min Total power requirement: 68.4 kVA Machine weight approx.: 7.8 t Accessories: Collet chuck on main spindle, hydraulic 3-jaw chuck KITAGAWA, BB208, 210 mm dia., on sub-spindle, various tool holders for turret, short bar loader, HYDRAFEED type MULTIFEED MX-1B for bar diameter 3 – 80 mm and bar length up to 1650 mm; chip conveyor, coolant system with belt filter unit Rsdpfjxn Amtsx Ah Hjbt

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 52 455 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2501-0154, tekėjimo ilgis: 600 mm, sukimosi skersmuo virš skersinio stumduko: 140 mm, tekėjimo skersmuo: 300 mm, ašies variklio galia: 25 000 W, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 5 000 aps./min, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 3 m/min, greitas poslinkis Y ašis: 3 m/min, greitasis eiga Z ašyje: 3 m/min, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 4 000 aps./min, sukimo momentas: 239 Nm, strypo praėjimas: 80 mm, X ašies padavimo greitis: 165 m/min, Y ašies padavimo greitis: 165 m/min, padavimo greitis Z ašis: 220 m/min, bendras svoris: 10 500 kg, Įranga: dokumentacija / vadovas, The machine is still in use and can be viewed in operation at VOVU Machining in Uden. A total of 6 identical machines are available here. Equipped with Fanuc 310iS control. Rbsdpfeur Hfzex Ah Hjt

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 16 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5000 kg TECHNICAL SPECIFICATIONS CNC: Fanuc 18TB Intermediate section Fixed intermediate section: Grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100° Spindle speed (continuous): 6 – 600 min⁻¹ Internal taper mount: MT5 Reduction sleeve: MT5/MT4 Short taper external mount: DIN 55026 / Size 5 Admissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mount: MT4 Quill stroke: 50 mm / 2° Option: micrometric movement with correction (Ø +/- 150 µm) Grinding wheel data Diameter 300 mm: 27 m/s Diameter 400 mm: 35 m/s Diameter 500 mm: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left wheel mount, max.: Ø 500 x 80 mm Additional right wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Rbsdow T Tb Hjpfx Ah Hjt Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Upper table Distance between centers: 1000 mm, swiveling 0 to 9° Grinding slide (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max pressure connection: 3 bar Required space (version 1000): 3600 x 2000 mm All technical information is provided without obligation and subject to errors and omissions.

Sąlyga: naudotas, Gamybos metai: 2007, Turning diameter: 300 mm Swing diameter over bed: 430 mm Swing diameter over cross slide: 300 mm Control: SIEMENS SINUMERIK 840 D Travel – X axis: 160 mm Travel – Z axis: 510 mm Max. workpiece length: 480 mm Main spindle bore: 53 mm Main spindle speed: 0 – 7,000 rpm Spindle nose: DIN 55026 A2-5 Spindle torque: 100 Nm Main spindle motor: 15 kW Sub-spindle bore: 53 mm Sub-spindle speed: 0 – 7,000 rpm Spindle nose: DIN 55026 A2-5 Rjdpewx R Rksfx Ah Hebt Spindle torque: 100 Nm Sub-spindle motor: 15 kW C-axis resolution: 0.001° C-axis rapid traverse: 1,000 rpm Turret: 1 x 12 stations Number of driven tool stations: 1 x 12 Tool holder: cylindrical shank (DIN 69880) VDI 25 Speed of driven tools: 0 – 8,000 rpm Torque: 16 Nm Power: 4 kW Feed force X/Z axis: 4,000 / 6,000 N Rapid traverse X axis: 24 m/min Rapid traverse Z axis: 30 m/min Total connected load: 38 kVA Machine weight: approx. 4 t Machine dimensions (L x W x H): 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, Collet chuck 163 E on sub-spindle, Bar feeder, manufacturer FMB, type turbo 3-36/3200 A, year 2018, for bar diameters up to 36 mm and bar lengths up to 3,200 mm, Various tool holders for turret (no driven holders), Coolant system

Sąlyga: naujas, The VHF 3.2 is a high-performance universal milling machine, categorized among conventional milling machines and belonging to the universal milling machine product group. This versatile model complements the established top model of the VHF series and offers a combination of a horizontal spindle and a swiveling vertical milling head, making it ideal for a wide range of applications. Featuring a robust frame made of high-strength cast iron and a precisely manufactured main spindle gearbox, the VHF 3.2 is perfectly suited for use in repair workshops as well as in training and production departments. The machine is equipped with a spacious table with a clamping area of 1,370 x 320 mm and, thanks to its powerful servomotor, offers infinitely variable feeds in all axes. In addition, essential features such as a coolant system and a chip tray are included as standard. If you are looking for a powerful and robust solution in the field of conventional milling machines, do not hesitate to order online or submit an inquiry. Rbsdpfxjn E Ni Hj Ah Hot

Sąlyga: geras (naudotas), Gamybos metai: 2008, HAAS VF-5D / 40 CNC MACHINING CENTER TRAVELS: - X-axis: 1,270 mm - Y-axis: 660 mm - Z-axis: 635 mm DISTANCE BETWEEN TABLE SURFACE AND SPINDLE NOSE: 178 – 813 mm TABLE: - DIMENSIONS: 1,321 x 584 mm - LOAD CAPACITY: 1,815 kg Rbodpfx Asvf Nw Doh Hst - NUMBER AND SIZE x PITCH OF T-SLOTS: 7, 14 x 80 mm SPINDLE: - ROTATION SPEED: 8,000 RPM - SPEED RANGES: 2 - SPINDLE NOSE: ISO 40 - HIGH-PRESSURE / INTERNAL COOLANT FEED RATES: - RAPID TRAVERSE SPEED: 18,000 mm/min - WORKING FEED RATE: 12,700 mm/min - JOG: 0 – 1,260 mm/min TOOL MAGAZINE: 24 POSITIONS POWER: 15 kW WEIGHT: 7,000 kg YEAR OF FIRST INSTALLATION: 2008