Vertikalios tekinimo staklės

EMAG VL 5S oLT

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 00404, tekėjimo skersmuo: 250 mm, Prieinama nuo: 2025-10-10 – Įrenginys susideda iš dviejų tarpusavyje sujungtų atskirų įrenginių. TECHNINĖ INFORMACIJA Tekinimo skersmuo: 250 mm Apsukų skersmuo: 260 mm STAKLIŲ DUOMENYS Srovės tipas: 3 fazių AC Dažnis: 50/60 Hz Darbinė įtampa: 400 V AC Nwsdpfx Agsw T Rx Nehsp Valdymo įtampa: 24 V DC Prijungimo galia: 36 kW Nominali srovė: 58 A Pagrindinis saugiklis: 80 A NH Bendras svoris: 6 500 kg ĮRANGA - Be varomų įrankių

Sąlyga: geras (naudotas), Gamybos metai: 2000, 1250 mm x 880 mm x 800 mm Variklinis velenas 12 000 aps./min H/V galva NC sukamasis stalas (C ašis) Heidenhain MillPlus valdymas SK-40 Njdpsxfi I Eefx Aghswp Įrankių keitimo įrenginys – 30 padėčių Vidinis aušinimas aukštu slėgiu 40 barų su papildomai sumontuota plyšinės filtracijos sistema Drožlių transporteris Elektroninis rankenėlė Padavimo greitis 15 000 mm/min Greitas važiavimas 40 m/min Staklių svoris 12 200 kg Prijungimo galia 46,00 kVA

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 480 mm,

Gamybos metai: 1992, Sąlyga: paruoštas naudoti (naudotas), Swing diameter over bed/cross slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. spindle speed: 3550 rpm, drive power: 35 kW, tool stations: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10 m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10,000 kg, control system: Siemens 840T with C-axis. After a buffer battery replacement, the machine software was deleted, resulting in the loss of several machine parameters without documentation and making automatic operation currently impossible. Expected to be available from Q1, 2025. Nwsdpfxou D H Hws Aghsp

Sąlyga: geras (naudotas), Gamybos metai: 2011, Control: FANUC Max. workpiece diameter: 220 mm Max. workpiece weight: 20 kg Max. turning length: 175 mm Max. spindle speed: 4,500 rpm Travel range: X = 660 mm, Z = 300 mm Tool changer with 12 stations Nedpfevzrk Sex Aghswp Chip conveyor

Sąlyga: naudotas, Gamybos metai: 2015, Swing diameter 420 mm Chuck diameter 400 mm X-axis travel 900 mm Z-axis travel 495 mm Spindle speed 3,100 rpm Number of tool stations 12 positions In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Nwodpfx Ajwqr S Toghjp Subject to changes and errors in the technical data and specifications, as well as prior sale!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Technical Details Maximum workpiece diameter: 400 mm Maximum workpiece length: 300 mm Control: SIEMENS 840Dsl Swing diameter: 520 mm Chuck diameter: 500 mm Travel paths x / y / z: 995 / ±30 / 580 mm Additional Information Operating hours (total): 1848h 1.2.2 TURRET BASE UNIT AND SLIDE UNIT Y-AXIS The slide unit of the Y-axis is mounted laterally on the machine base. A highly responsive, position-controlled, and maintenance-free servo motor is used for axis drive. The slide is driven via a high-precision ball screw. A linear measuring system is installed in the Y-axis. Positional repeatability: 2 µm. TURRET BASE UNIT Shortest indexing times due to direct drive for indexing, cooled for consistent accuracy. MAIN SPINDLE 37.7 kW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVEN TOOLS (C442) With internal coolant supply to the tool.* Maximum speed: 6,000 rpm Characteristic speed: 3,200 rpm Torque at 100% duty cycle: 54 Nm / 18.1 kW Torque at 40% duty cycle: 83.6 Nm / 28.0 kW Torque at 10% duty cycle: 100 Nm / 33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVEN TOOLS, 12x BMT75 for tool holders BMT75 1.2.6 CIRCULATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Workpiece height (incl. workpiece pallet) max. 300 mm Maximum workpiece weight: 60 kg Nwodpew Hxuaofx Aghop 1.2.7 SET (10 pcs) DRAG FRAMES for O-band For workpiece diameter 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump delivery rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) controls the machine’s thermal management. Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness: 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT TYPE – REAR DISCHARGE Chip discharge height: 1100 mm. / With integrated coolant tank, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m³/h 1.2.14 WASHDOWN GUN 1.2.16 WORKPIECE MEASUREMENT With measuring probe, fully protected against chips and coolant outside the working area. 1.2.17 BLOW-OFF DEVICE FOR MEASURING PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840Dsl, FANUC 31i/32i) 1.2.23 3-COLOUR SIGNAL LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 SET OF TOOLS FOR OP10 + OP20 1.3.7 HYDRAULIC THROUGH-BODY POWER CHUCK CYLINDER, SIZE 150 - with 1 medium transfer Coolant is supplied to the workpiece via the main spindle and the chuck. 1.3.10 3-JAW POWER CHUCK KNCS-N 500-155 QUICK CHANGE n max. = 2200 rpm (reference speed per DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 ACCESSORIES FOR KNCS-N 500-155 comprising: - Chuck flange DIN 55026 A11 - Drawbar adapter with through hole and shut-off valve for central air or coolant supply - Mounting bolts 1.3.12 FLUSHING NOZZLE IN CHUCK BORE Additional tool holders with tools

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), A CNC vertical turning machine by EMAG is available. Chuck diameter: 250 mm, swing diameter: 260 mm, travel X/Z: 570 mm/200 mm, rapid traverse X/Z: 60 m/30 m/min, feed force X/Z: 5 kN, ballscrew diameter X/Z: 40 mm, front spindle bearing diameter: 110 mm, spindle speed: 4,500 rpm, power: 18/28 kW, shank diameter: 40 mm, driven tool power: 12 kW, speed: 6,000 rpm. Machine dimensions X/Y/Z: approx. 2,700 mm/2,100 mm/2,400 mm, weight: approx. 7,000 kg, power-on hours: 50,416 h, automatic mode hours: 9,016 h. Documentation available. An on-site inspection is possible. Nwjdpevva Hkefx Aghsp

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Description Control: Fanuc 21i-T Maximum swing diameter: 260 mm Maximum chuck diameter: 250 mm Motor spindle speed: 4,500 rpm Clamping cylinder: Full-stroke cylinder Tool turret: 12-position disc turret without live tooling Nedpfx Aotq Tnujghewp Tool holder: VDI 40 Workpiece feeding: Workpiece conveyor belt with drag frame. Chip conveyor: Hinged belt conveyor.

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 101458, Mašinos duomenų lapas Bendrieji duomenys Gamintojas: EMAG Mašinos tipas: CNC vertikali tekinimo staklė Modelis: VL5 S Gamybos Nr.: 101458 Pagaminimo metai: 2008 Techniniai duomenys Didžiausias griebtuvo skersmuo: 260 mm Didžiausias apsisukimo skersmuo: 260 mm X ašies eiga: 570 mm X ašies darbinis eiga: 250 mm Z ašies eiga: 200 mm Nwjdpfjxtpi Sjx Aghsp Transporterio didžiausia leistina bendra masė: 120 kg Transporterio didžiausias diametras: 220 mm Pagrindinio veleno priekinio guolio skersmuo: 110 mm Pagrindinės pavaros AC asinchroninis variklis, didžiausias sūkių skaičius: 4 500 (5 000) aps./min. Variklio galia ties 100/40 % apkrova: 18/27 kW Sukimo momentas ties 100/40 % apkrova: 202/303 Nm Įrankių skaičius: 12 vnt. Įrankio laikiklis pagal DIN 69880, diametras 40 mm, didžiausias įrankio ilgis 190 mm Drožlių transporterio šarnyrinė juosta: 1 250 mm išmetimo aukštis Aušinimo skysčio talpa: 315 l, 8 bar Valdymas: Siemens 840 D Prisijungimo galia: 42 kW Įtampa: 400 V, 50 Hz Svoris: apie 6 500 kg Užimamas plotas: 10 m²