Vertikalios tekinimo staklės

EMAG & Lang-Laru VTC 250

Gamybos metai: 2000, būklė: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Hsdet Hw Nyopfx Aftsnn Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.

Būklė: geras (naudotas), Gamybos metai: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (equipment): 450 mm Module – max.: 6 Gear width – max.: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate – infinitely variable: 130 – 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface – tool spindle: -55 / +300 mm Maximum distance table surface – tool spindle: 200 mm Maximum distance table surface – tool spindle: 350 mm Manual column side shift: +/- 25 mm Manual tool spindle swivel angle: +/- 0.5° Max. tool rotation speed: 15 rpm Max. workpiece rotation speed: 27 rpm Max. tool diameter: 7 inches Voltage: 400 V Frequency: 50 Hz Max. line current: 70 A Total power requirement: 48 kW Machine weight: approx. 11 t Space requirement: approx. 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Mod. PSA 300 Hedpfx Afovu E Nuotenn The CNC modular gear shaping machine with shaping cutter is designed for machining external and internal cylindrical gears with straight or helical involute toothing, as well as any other profile obtainable by generating or slotting methods. The working cycle is controlled by a CNC unit with dedicated software for gear machining. Field of application --> The PSA 300 is designed for manufacturing: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 305 mm, garantijos trukmė: 24 mėnesiai, galia: 30 kW (40,79 AG), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilt-Axis Cutting Head Fully refurbished with manufacturer certification and a two-year warranty. The configuration of the waterjet cutting machine is fully customizable. Please feel free to contact us with your configuration requirements. Customers seeking efficient and affordable waterjet cutting systems will find their solution in the Modular Line MAXIEM. These high-performance MAXIEM systems combine operational flexibility and cost-effectiveness, and can be equipped with a wide range of accessories tailored to your cutting tasks. With the modular MAXIEM line, OMAX introduces mature, reliable waterjet cutting technology at an economical entry price, thereby making the advantages of this technology accessible for a variety of applications. On request, financing through leasing is possible under very attractive conditions, e.g. for up to 86 months. Hnodpfx Afjrm Ilfotjn - Accuracy up to ±0.05 mm - Software and machine components incorporate the latest OMAX technologies The MAXIEM achieves a cutting precision of under 1/10 mm with the A-JET 3D cutting head. The 3D head enables bevel cuts up to 60° as well as automatic compensation for taper angle errors. The machine is currently being refurbished, therefore illustrations may slightly differ from the actual offer. Prompt delivery can be arranged with INNOMAX AG.

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Main engine: 75 kw Capacity: 1000-1200 kg/h. Ring die/matrix: 8mm, new. Years 2001. Stainless steel cover. Manufactory: Radviliskis Machine factory-Lithuania. Model: OGM 1.5 Include: *extra new ring die for 8mm. *10pcs new roller shell. Hjdpfox R Suzox Aftenn *10 pcs new bearing for roller.

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Hnjdpfot Hw N Tox Aftjn Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Būklė: dilaminuotas dirbtuvėje (naudotas), mašinos/transporto priemonės numeris: 550-235-ELD, GENERAL SPECIFICATIONS Maximum rolling diameter: 41 mm Hnjdpfxsd Nw Ttj Aften Max./min. module range: 1.5 / 0.39 Maximum rolling width: 92 mm Maximum stroke of tool carriage: 760 mm Maximum rack length: 610 mm Max./min. diametral pitch: 20/40 – 32/64 Serial number: 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power: 15 HP

Būklė: naudotas, Gamybos metai: 2007, Ratlankio skersmuo - maks. 380 mm Ratlankio plotis 540 mm Modulis - maks. 7 Valdymas SINUMERIK 840 D Ašinė eiga 600 mm Stalo skersmuo 317 mm Stalo greitis 100 aps./min Frezos galva pasukama +/- 35 laipsniai Hnedpfx Afeyt Rvhetsn Frezos veleno pavara 27,00 kW Frezos sukimosi greitis - be pakopų 1500 aps./min Frezos skersmuo 160 mm Frezos ilgis maks. 330 mm Frezos galvos greitis maks. 3000 1/min Šliufuojančios frezos diametras - maks. 160 mm Šliufuojančios frezos ilgis - maks. 330 mm Tangencinė stumoklio eiga maks. 300 mm Ašinė greitis 10.000 mm/min Tangencinė greitis maks. 3000 mm/min Radialinė greitis 7.500 mm/min Alyvos talpa 100 l Aušinimo skysčio talpa 780 l Kontralaikiklio eiga 540 mm Bendra galia 50,00 kW Staklių svoris apie 16,00 t Reikalinga erdvė apie 6,00 x 4,50 x H3,50 m Skirta šioms operacijoms: ašinis šliufuojantis frezavimas, atskirų detalių frezavimas, sraigtinių ratų frezavimas, nuokraščių nuėmimas, briaunų šlifavimas; NC priešpriešinis atraminis stalas

Būklė: naudotas, Gamybos metai: 2005, Machine weight approx. 7,800 kg Required space approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gearing: - Maximum module (steel with approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Maximum module (steel with approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Hnodpfjudc S Hex Aftjn Machine travel distances: - Radial (X-axis): 180 mm - Column swivel (B-axis): -1 to +11 degrees Machine – workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - Feed rate X-axis: 12,000 mm/min - Workpiece table (C-axis): 0–400 rpm - Cutter (C2-axis): 0–300 rpm - Spindle stroke (A-axis): 500–3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Machine connected load: 35 kVA - Cable cross section: 35 mm² - Fuse protection: 80 A

Būklė: geras (naudotas), Bar capacity max: 36 mm Maximum spindle speed: 6300 rpm Number of spindles: 2 Control: Traub TX8i Tool turret 1: Number of tools: 12 X-axis: 50 mm Z-axis: 50 mm Front tool turret: Number of tools: 7 Speeds: 150 – 3000 rpm, 300 – 6000 rpm Mount diameter: 40 mm X-axis: 370 mm Z-axis: 250 mm Hjdpstrvzxefx Aftsnn Rear tool turret: Number of tools: 5 Speeds: 150 – 3000 rpm, 300 – 6000 rpm Mount diameter: 40 mm X-axis: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3200 mm Bar diameter: 5 – 42 mm Country of origin: Germany Machine dimensions (LxWxH): 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Būklė: naudotas, Gamybos metai: 2014, maks. tekinimo skersmuo 160 mm maks. tekinimo aukštis 150 mm maks. ruošinio skersmuo 100 mm maks. ruošinio aukštis 150 mm maks. sukimų dažnis 6.000 aps./min X ašies eiga 700 mm Hjdpfx Afsqvd Iuotsnn Z ašies eiga 375 mm C ašis 360° Valdymas: FANUC Vertikali tekinimo staklė | EMAG – VL2 Įrengta ruošinių pervežimo konvejeriu. Staklės yra itin geros būklės. Atkreipkite dėmesį, kad techniniai duomenys pateikti pagal panašias stakles.