Viena pagrindinė pjovimo mašina

Elumatec MGS

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, steplessly adjustable Saw blade height adjustment: electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. Among other things, the following components have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to servo-controlled pusher - New electrical components - New pneumatic lines - New pneumatic components - Retrofit to valve manifold - Optimized extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishing of the enclosure In addition, the machine features: - Minimum quantity lubrication - Splitter extension (for high-quality cut surfaces without drag marks) - Loading magazine for gentle handling of painted/anodized surfaces - Scrap piece ejection in the pusher - Foldable scrap piece tray Options: - Magazine width: 3,000 mm Gjdpfx Absuiy Ngedjbg - Pusher length: 6,000 mm - Pusher length: 8,000 mm - Reinforced motor: 5.5 kW - Multiple clamping device for parallel sawing of several workpieces - Online support connection - Delivery and installation at your site - Training for your staff

Sąlyga: naujas, Gamybos metai: 2025, ATTENTION: POSSIBILITY TO CONFIGURE CRANES TO ANY SPECIFICATION Thank you for your interest in our offer. WNM Sp. z o.o. offers: gantry cranes, semi-gantry cranes, jib cranes, column cranes, suspended overhead cranes, top-running overhead cranes. We invite you to submit inquiries for quotations; we provide pricing based on customer-supplied information such as: type of crane, lifting capacity, lifting height, dimensions, and runway length. This listing refers to a gantry crane/hoist with a lifting capacity of 5 TONS. All crane components are made from top-quality materials, ensuring durability and resistance to damage even in demanding operating environments. TECHNICAL SPECIFICATIONS: Gbjdpfev Ni Rxjx Abdog GANTRY CRANE HOIST – CAPACITY 5 TONS Span length - 6 M Lifting height: 3.55 M Hoisting mechanism – 5-ton electric chain hoist Lifting speed: 2.7 M/MIN Cross travel speed: 11 M/MIN Crane travel speed: 10 M/MIN DUTY CLASS A3 Power supply: 380V/50Hz/3 phases Control mode: pendant "lamp" + remote control We issue VAT invoices for all machines. If you have any questions, we remain at your disposal.

Sąlyga: naudotas, Gamybos metai: 2007, Technical data: Speed: 2800 rpm Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Gjdpfxorwlwvj Abdsbg Dimensions (W x D x H), approx.: 1760 x 800 x 1680 mm

Sąlyga: naudotas, Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 26045, pjūklo disko skersmuo: 420 mm, Performs double mitre cuts. Supplied complete with infeed roller conveyor and outfeed roller conveyor equipped with a measuring reader. Gbodev Hfc Eepfx Abdjg

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Briquetting press machine, automatic, hydraulic model POR STANDARD Used machine Condition: Excellent Briquette cutting system Gsdpfow E Iyijx Abdobg Hydraulic machine CE marking: Yes Hourly output: 60 / 90 kg/h Hydraulic pump motor: 7.5 HP Briquette diameter: 65 mm Maximum briquette length: 50–300 mm Voltage: 380V / 50 Hz Net weight: 800 kg Overall dimensions: 195 x 110 x 150 cm (H)

Sąlyga: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with glazing bead cutting unit, alternatively usable as a grooving spindle ATS control and program control ----- Machine is currently being overhauled and function-tested Technical Data Summary (additional accessories, if included, upon request) ----- General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW Gsdpfx Aou Su Husbdjbg > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically controlled up/down Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional Features ----- > Glazing bead cutting or usable as a grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Combined control of right spindle and glazing bead discharge via manual selector switch on the control panel > Spindles with mechanical digital display Option: Used planer heads available (technical data as per manufacturer – no guarantee!)

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Gbjdoh Rdwxspfx Abdsg Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Sąlyga: geras (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: 21100122-F, Offer 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm Gbsdpfxswq N Sws Abdog - Cutting range at 90° (round): 120 mm - Cutting range at 90° (flat): 105 x 105 mm or 180 x 70 mm - Cutting range at 45° (round): 110 mm - Cutting range at 45° (flat): 135 x 60 mm - Mitre adjustment to both left and right: 45° - Tilt-adjustable mitre head for compound cuts to the left - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement (approx.): W 600 x H 1,730 x D 1,200 mm - Weight (approx.): 180 kg

Sąlyga: naujas, Gamybos metai: 2025, - TFON Präzisions-Entgrat- und Finishsystem - Entwickelt für eine erstklassige Oberflächenbearbeitung und präzises Kantenrunden bei einer Vielzahl von Materialien und Branchen vereint das TFON-System fortschrittliche Automatisierung mit vielseitigen Konfigurationsmöglichkeiten, um exakt Ihren Fertigungsanforderungen gerecht zu werden. Materialkompatibilität: Geeignet für Anwendungen mit Aluminium, Edelstahl und Baustahl. Großer Dickenbereich: Bearbeitet Werkstücke effizient von 0 bis 120 mm Materialstärke. Hervorragende Finishqualität: Ausgelegt für hochwertige Oberflächenergebnisse, die die Produktästhetik und -funktionalität steigern. Industrielle Vielseitigkeit: Ideal für die Branchen Medizintechnik, Großküchentechnik, Automotive-Komponenten sowie Metallzubehör. Kantenrundungspräzision: Ermöglicht präzise Rundung mit Radius 2 und verbessert damit die Sicherheit und die Optik des Endprodukts. Fortschrittliche Automatisierung: Integriertes Siemens-Steuerungssystem sorgt für höchste Präzision und Betriebssicherheit. Unabhängige Bearbeitungsstationen: Ermöglichen eine flexible, effiziente Mehrstufenbearbeitung für komplexe Arbeitsabläufe. Mehrere Tischbreiten verfügbar: Wahlweise mit Tischbreiten von 650 mm, 1000 mm oder 1300 mm erhältlich – angepasst an unterschiedliche Produktionsanforderungen. Individuelle Förderbandoptionen: Wählen Sie zwischen Vakuum-, halbmagnetischen- oder halb-Vakuum-Fördersystemen für eine sichere und zuverlässige Werkstückführung. Oberflächenreinigung: Entfernt effektiv Rost, Oxide und Oberflächenverunreinigungen zur optimalen Vorbereitung für nachgelagerte Prozesse. Erhöhte Bedienersicherheit: Die Kantenrundungsstation minimiert Verletzungsrisiken durch scharfe Kanten. Hochleistungs-Finishing: Ausstattung mit Scotch-Abrasivtechnologie für gleichmäßige, homogene Oberflächenergebnisse. Längere Standzeit der Schleifmittel: Pneumatisches Oszillationssystem maximiert die Nutzungsdauer von Schleifbändern und Scotch-Abrasiven und reduziert Stillstandszeiten. Gbjdshq A Txepfx Abdjg Konstanter Radius: Sechs Lamellenräder gewährleisten gleichmäßige Kantenradien für konstant hohe Qualität bei jedem Werkstück. Für Leistung entwickelt. Auf Sicherheit ausgelegt. Für industrielle Vielseitigkeit gebaut. TFON – Oberflächenperfektion bei jedem Werkstück.

Sąlyga: naujas, Gamybos metai: 2024, slėgis: 8 juosta, Mitre adjustment horizontal 15°–90°–15° continuously variable, Saw motor 5.50 kW (400 Volt), Saw blade 600 mm, travel range rear stop 180 mm, working height adjustable from 940 to 1000 mm via leveling feet, 2 x extraction connections (top in hood and bottom), net weight 600 kg, dimensions (W x D x H): 135 x 140 x 150 cm, RAL 9007 grey aluminium. Turntable made from ground nickel-steel. Saw head with ball-type linear guides, offering high accuracy, long service life, and maximum rigidity. Saw material can be pre-clamped under low pressure when the hood is open. Hydropneumatic blade feed. Chip removal directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment continuously variable at 0º/45º/90º/–45º/–60º • Including 2 pneumatic clamps (vertical) • Saw blade feed infinitely adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device • Mist spray unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure reducer • Ergonomically arranged control panel Gsdpfx Abegwt S Tedjbg • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in scope of delivery! Our NC pusher system ensures that your workpieces are positioned at the desired processing position on our UK 600 HA 90°. A gripper clamps the material, and the NC control positions the material automatically. The clamping and sawing process is then triggered. The positions are programmed into the controller beforehand. Once the machine has finished processing, it automatically moves to the next saw position. Depending on the workpiece, multiple parts can be clamped side by side or stacked and positioned simultaneously. You are welcome to inspect the system at any time in our manufacturing or demonstration hall. Please feel free to contact us for more information. Plantec Maschinen GmbH