Kopijuoti maršrutizatorių

elumatec AS 70

Sąlyga: naudotas, Gamybos metai: 1997, Copy milling machine, copy router, hand lever milling machine, hand lever router, single-spindle copy milling machine -Manufacturer: elumatec, 1-SPINDLE COPY ROUTER Type AS 70/44 -Spindle speed: 12,000 rpm -Stop depths: see photos -Workpiece clamping: pneumatic -Dimensions: router 580/500/H1510 mm, roller stands 1050/210/H900 mm -Weight: 149 kg with pallet Nsdpetvhr Sofx Adujli

Sąlyga: beveik kaip naujas (naudotas), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL PARAMETERS: cutting width: 350 mm cutting height: 160 mm motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment maximum blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm track width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment top and bottom shaft height adjustment six upper pressure rollers mechanical roller pressure town anti-kickback pawls Nlodpfx Adjqy E Rleuei cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Nsdpfeu Uh T Djx Adueli Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Njdpfx Adei Hpk Ueuoli Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Sąlyga: labai geros būklės (naudotas), SCM S520 Thickness Planer Nsdpfx Adsitkx Ejueli Working width: 520 mm Working height: 250 mm Feed speed adjustable: 4 steps Cutterblock with traditional knives 4-knife cutterblock Power: 4 kW Weight: 670 kg

Sąlyga: geras (naudotas), Used boring machine Brand: Juaristi Model: MDR 75 Weight: 5,600 kg Motor power: 10 kW 2-axis FAGOR digital readout. Spindle diameter: 75 mm Longitudinal travel (X axis): 1,150 mm Nlsdpfsh Ryc Hex Aduji Vertical travel (Y axis): 700 mm Column traverse (W axis): 800 mm Quill travel (Z axis): 500 mm Table size: 900 x 700 mm Speeds: 22–1,055 rpm Number of feeds: 9 (from 0.04 to 3 mm/rev).

Gamybos metai: 1998, Sąlyga: geras (naudotas), I am selling a dowel drilling machine with dowel insertion unit KOCH Sprint-PTP Neded Exwgopfx Adueli Year of manufacture: 1998 Number of dowel spindles: 1 Number of insertion heads: 1 Programmable CNC-controlled motorized Z-axis Working width: 1200 mm Maximum working height: 36 mm Available for immediate sale

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Nodpfx Adscqvhwsusli Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), Window manufacturing machines WEINIG Nlodpfjiix Uvox Aduoi Tenoning and slotting machine UNITEC 10, year 1997 Profiling and rebate milling machine UNIVAR 10, year 1997

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 96123, Connected load: 380V 46A Planing width: 180 mm Planing height: 120 mm Infeed table length: 2300 mm 4x Leitz reversible knife cutterheads, each with 4 knives 2x feed speeds electric height adjustment 4x star-delta switches 2x pneumatic hold-down devices 1x side pressure device 2x steel infeed rollers Nedjh U Db Ijpfx Adusli 1x rubber-coated outfeed roller Extraction connection: 4x120 mm