Ekscentrinis presas

Edelhoff AZR 160

Gamybos metai: 1990, Sąlyga: naudotas, Pressure: 75 t Throat depth: 300 mm Stroke: 8 - 110 mm Table size: 750 x 600 mm Ram adjustment: 75 mm Ram surface: 430 x 230 mm Passage opening in table: 250 x 150 mm Ram bore: 40 mm Strokes per minute: 60 + 90 spm Machine weight: approx. 4.4 t Total power requirement: 4.5 - 6.8 kW Space requirement: approx. 1.95 x 1.1 x 2.35 m Distance table/ram at bottom stroke, ram down: 19 mm Distance table/ram at top stroke, ram up: 380 mm Equipment: - with hydraulic clutch-brake combination, new hydraulics and oil cooler - with gear drive in oil bath - fixed table prepared for attaching tool change consoles - 2 roller rails in table - mechanical overload in ram (shear plate) The following work will be carried out on the machine / partial refurbishment: - Machine will be completely disassembled, inspected, seals replaced, defective parts exchanged, etc. - Machine will be repainted Fgsdpfx Ajd Nl E Ujbmjk - New Balluff cam switchgear - New hydraulic unit with oil cooler for clutch - New Vogel central lubrication - New control cabinet with touch panel and ABB safety control - Current safety inspection (German UVV) including brake time measurement

Sąlyga: geras (naudotas), Gamybos metai: 1989, bendras aukštis: 6 450 mm, For sale: Beche short-stroke drop forge hammer KGH 4B. Machine weight: 65 t Working capacity: 40 kJ Max. blow frequency: 98/min Max. usable blows: 41/min Max. ram stroke: 790 mm Fodport Uc Eofx Abmsgk Machine is dismantled Technical data available on request

Sąlyga: naudotas, Blow energy: 11,000 kg/m Max. stroke: 900 mm Clear guide width: 750 mm Length of tool seat in hammer bar: 750 mm Max. strokes per minute: 90 min⁻¹ Length of tool seat in die holder: 1,050 mm Minimum tool thickness: 350 mm Max. upper tool weight: 1,100 kg Working height approx.: 780 mm Sow block weight: 75,000 kg Machine weight approx.: 103,000 kg Fgjdpfxevam Ebe Abmek

Sąlyga: paruoštas naudoti (naudotas), Pressing force: 1600 kN, throat depth: 450 mm, installation height: 560 mm, ram stroke: 8–160 mm, control system: SCHMERSAL SEPG 05.3.2.0.22/95, weight: 16.2 t, including documentation. Fedpfxjhz Ua Ss Abmjgk

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.01, Fresan FP 130P - C-Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Capacity: 130 tons (1300kN) * Strokes per minute: 55 SPM (adjustable) * Distance between table and slide: 500 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC ground for minimal surface friction. * Bronze bearings, quality SnBz-12 * Pneumatic clutch-brake unit * Fully enclosed, helical gear drive lubricated with oil * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-way slide guide with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable strokes per minute via AC inverter * Motorized slide adjustment * Mechanical overload protection (hydraulic protection can be retrofitted to standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pieces) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feed and automation systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) Fjdpfx Asnyh Siobmsgk * Custom-built machine

Gamybos metai: 1971, Sąlyga: naudotas, Pressure: 160 t Throat depth: 440 mm Stroke: 20 - 120 mm Table surface: 1050 x 750 mm Fgedpfxecyc Ade Abmok Strokes per minute: 42 and 62 spm Ram surface: 800 x 500 mm Pin bore (depth x diameter): 85 x 50 mm Table through-hole: 355 mm Installation height (stroke down, ram adjustment up): 455 mm Ram adjustment: 100 mm Machine weight approx. 11.2 t *with gear drive *with fixed work table *with enlarged table and ram surface *with extended throat depth *with pass-through in the frame *with ram counterbalance The machine is currently being inspected and, for this, the clutch has been disassembled. (Currently, the press is in a dismantled state.)

Gamybos metai: 1977, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 3273, Manufacturer: Neff Model: 16 SRKA Year of manufacture: 1977 Weight: approx. 4,000 kg Machine number: 3273 General / Technical Data: Fgedpfed N Rl Njx Abmjk Used vertical hydraulic broaching press in good, ready-to-use condition Pressing force: 16,000 kg Stroke: 1,300 mm Throat depth: 250 mm Daylight: 1,500 mm Table size: 680 x 450 mm Table opening: 160 x 380 mm Table height from floor: 1,600 mm Ram speed: hydraulically adjustable, stepless Machine dimensions (W x D x H): approx. 1,000 x 1,800 x 5,100 mm Power supply / power: 380 Volt, 50 Hz / 22 kW Accessories / Special Features: • Integrated coolant system • Pressing force indicator • Press force limitation • Speed control Remarks: The machine is in working, ready-to-use condition and still features its original paintwork. Work stroke is released manually, either by hand lever or foot pedal. The machine is connected to power in our warehouse and can be inspected in operation.

Gamybos metai: 1980, Sąlyga: naudotas, max. pulling force: 10 t max. stroke: 1250 mm max. cutting speed: 10 m/min max. return speed: 27 m/min max. workpiece diameter: 320 mm broaching stations: 3 pcs weight: 4.8 t automatic tool feeder Fgsdpfx Ajcdtpljbmek hydraulic clamping for drawing head and end piece holder automatic loading device for workpieces up to 100 mm diameter magnetic strip chip conveyor

Sąlyga: naudotas, Gamybos metai: 1978, Impact energy: 7000 kg/m Max. stroke: 850 mm Max. number of strokes: 100 min⁻¹ Tool holder length in hammer bar: 650 mm Ram weight: 2500 kg Tool holder length in die holder: 900 mm Fgedpevam D Rsfx Abmjk Min. tool thickness: 300 mm Max. upper tool weight: 800 kg Working height approx.: 780 mm Anvil weight: 47,500 kg Machine weight approx.: 64,000 kg

Sąlyga: naudotas, Gamybos metai: 1996, Pressure: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table area: 830 x 610 mm Ram area: 650 x 400 mm Fsdpfstycdkox Abmegk Frame gap (towards rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment/features: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection - ejector - centralized grease lubrication - cover plate for drop hole - stepless speed control via frequency inverter - The machine will be technically overhauled and inspected in our facility and will receive a new control cabinet with safety control system and touchscreen - current accident prevention inspection (UVV) with brake time measurement