Ekscentrinis presas

EBU , Typ E 50

Sąlyga: naudotas, Gamybos metai: 1977, Pressure: 250 t Stroke: 40 - 190 mm Stroke rate: 40 /min Throat depth: 500 mm Clearance between frame sides: 1050 mm Installation height: 615 mm Table size: 1380 x 880 mm Pass-through opening in table: 450 mm Table height above floor: 800 mm Ram area: 1200 x 800 mm Ram adjustment: 125 mm Drive power: 22.0 kW Weight: 24.0 t Required floor space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Klodpfx Afovuuais Isl Approved for manual feeding operations in compliance with German accident prevention regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, clamping plate, two-hand control.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Control: Siemens Sinumerik 840D Working area Swing diameter over bed: 820 mm Swing diameter over cross-slide: 520 mm Cross-slide travel: 600 mm Toolholder: Front: Capto size C6 – Multifix D1 Rear: Drilling rest with clamping claw Centre distance: 3000 mm Main spindle drive Power, digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically actuated, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter at front bearing: 190 mm Speed range (constant V): 1 – 1,800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter at front bearing: 210 mm Speed range (constant V): 1–1,600 rpm Cross-slide Feed range, cross: 0.001 – 1,000 mm/min Feed range, longitudinal: 0.001 – 2,000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse, cross/longitudinal: 5/10 m/min With centre distance: 4,000 mm Feed force, cross: 16,000 N Feed force, longitudinal: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill stroke: 280 mm Taper: 6 Mk Electrical equipment Three-phase current: 400 V, 50 Hz Design according to VDE and EMC guidelines EN 50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C power networks/industrial networks without RCD protection Dimensions Machine (L × W × H): 2.88 m + centre distance × 2.55 m × 2.32 m Machine weight (Centre distance / approx. weight in kg) Ksdpfsxgdfbex Af Isll 3,000 mm: 10,900 kg

Sąlyga: labai geros būklės (naudotas), Grinding length 1000 mm Kledpfx Afek Abxxj Iel Grinding diameter Ø 350 mm In very good condition.

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Kjdpfx Aocubatof Iell Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Sąlyga: naujas, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications Kledpfxsfbbx Ro Af Isl - Distance between centers: 2000 mm - Center height: 330 mm - Swing over bed: 660 mm - Swing over gap: 900 mm - Swing over cross-slide: 460 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle mounting: DIN 55029, D1-8 - Speed range (16 steps): 25 – 1600 rpm - Longitudinal feed range (25 steps): 0.044 – 1.48 mm/rev - Cross feed range (25 steps): 0.022 – 0.740 mm/rev - Metric threads (54): 0.45 – 120 mm - Inch threads (54): 7/16 – 80 TPI - Quill diameter: 90 mm - Quill travel: 235 mm - Quill taper: MK 5 - Motor power: 7.5 kW (10.0 HP) - Machine dimensions (W x D x H): 3630 x 1200 x 1520 mm - Weight approx.: 2900 kg Features - Versatile applications in general engineering, production, single-part manufacturing, etc. - Central, user-friendly controls for feeds and threads with lead and feed screw - Prism bed made of grey cast iron, inductively hardened and precision ground - Modern main spindle bearing with precision angular contact roller bearing - Hardened and ground gears and shafts, including those in the feed gearbox - Rapid traverse for longitudinal and cross feed as standard, reducing non-productive time - Large spindle bore (105 mm) for workpieces with large diameters - Smooth start via mechanical multi-plate clutch - Electromechanical foot brake to reduce non-productive time - Optimal machining performance, even in face turning operations - The bed is reinforced with heavy ribs to stiffen the bed guideway and minimize vibration influence Scope of Delivery - 3-axis digital readout ES-12 V with LCD display - Slip clutch - Rapid traverse for longitudinal and cross feed - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Face plate 450 mm - Fixed steady rest – max. workpiece diameter 180 mm - Travelling steady rest – max. workpiece diameter 120 mm - 2 live centers - Motor with magnetic brake (CE-compliant) - Foot pedal with braking function (CE-compliant) - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool post with 4 holders - Safety guard for quick-change tool post - Change gears - Reducing sleeve - Chip guard (rear panel) - Cable management via energy chain - Operating tools

Sąlyga: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Kjdpfxofx Hv Ho Af Isll Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1980, Presavimo jėga: 300 t Stalo dydis: 1.200 x 850 mm Iškyša: 400 mm Stūmoklio plotis: 1.100 mm Anga stale: 400 x 250 mm Įmontavimo aukštis: 500 mm Smūgių skaičius: 32 1/min Klsdod A Hbcepfx Af Isl Eigos ilgis: 30 - 140 mm Stūmoklio reguliavimas: 105 mm Svoris: apytiksliai 19.500 kg Kita - Patvirtinta rankiniam įkrovimui - Su Herion Xsz 20 saugos vožtuvu - Motorizuota centrinė tepimo sistema - Pneumatinis stūmoklio svorio subalansavimo cilindras - Motorizuotas stūmoklio reguliavimas - T formos grioveliai stūmoklyje - Laisvai pastatomas valdymo pultas - Perdirbti švaistiklio guoliai Apsauginiai dangteliai pavaros dantračiui, be abejo, yra – žr. antrą nuotrauką.

Sąlyga: naudotas, Gamybos metai: 1974, tekinimo skersmuo virš slankiojančio stalo: 480 mm, plotis centre: 1 500 mm, Lead and Feed Screw Lathe Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Completely overhauled in 2012 Technical Specifications Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Year of manufacture: 1974, completely overhauled in 2012 Control: Conventional Centre distance: 1,500 mm Swing diameter over bed: 480 mm Swing diameter over cross slide: 295 mm Spindle speed: 20 – 2,190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1,200 kg Equipment - 3-jaw chuck D 250 mm, installed - Face plate D 400 mm Kjdpfx Aowm D Ilef Iell - 10 quick-change tool holders - 1 steady rest All information provided without guarantee. A powered demonstration is possible at any time in our showroom.

Gamybos metai: 1995, Sąlyga: paruoštas naudoti (naudotas), A Promecam (Amada) APX 103 CNC press brake is available. Press force: 1000 kN, working width: 3000 mm, distance between uprights: 2550 mm, gap opening: 370 mm, stroke: 100 mm, throat depth: 400 mm, approach speed: 70 mm/s, bending speed: 9 mm/s, return speed: 85 mm/s, drive power: 10.5 kW. Machine dimensions (L/W/H): approx. 3500 mm / 2200 mm / 2300 mm, weight: approx. 6400 kg, control: Amada Operateur, operating hours: 36,261 h. The machine is still in operation, thus the operating hours are increasing. Documentation is available. An on-site inspection is possible. Kledpfx Aswm Nn Ref Iol

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 1 200 h, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 1 100 mm, galia: 46 kW (62,54 AG), atstumas tarp centrų: 2 000 mm, darbo valandos: 1 200 h, Galima įsigyti tekinimo staklės DMT CD1100 su Heidenhain valdymu ir tik 1200 darbo valandų. Darbo sritis apima maždaug 1100 mm apsisukimo skersmenį virš staklių lovos ir apie 800 mm virš išilginio slankiklio. Įrankio laikiklis Multifix D1. Tarpcentrė — 2000 mm. Pagrindinis velenas varomas 46 kW galingumo varikliu (60% darbo ciklas) su dviem pavarų lygiais. Kljdpfx Afoxlza He Iel Veržliaraktis: - Pinolės skersmuo: 125 mm - Priėmimo kūgis: 6 Mk Pristatymas: atsiėmimas iš vietos Mokėjimas: 100 % pavedimu prieš atsiimant, iškart po sąskaitos išrašymo Visi duomenys nėra įpareigojantys, tarpinis pardavimas galimas. Įrenginys parduodamas be garantijos ir lieka mūsų nuosavybe iki visiško apmokėjimo.