Sriegio valcavimo mašina

E.W.Menn GW63

Būklė: naujas, Gamybos metai: 2024, veleno ilgis po galvute: 80 mm, sriegio ilgis: 55 mm, važiuojamoji greitis (maks.): 480 mm/min, E.W. MENN GW63 Flat Die Thread Rolling Machine with Rack-Type Dies Completely overhauled as new. New guides, vibrator, and new vibrating discharge system. New electrical system with inverter and PLC control. Thread size: M8 x 80/55 mm. Production rate: 480 pieces per minute. Thread diameter (min./max.): 3 - 8 mm. Itodpfxst Uucao Alreh Die length: 115/130 mm. Available for inspection and testing at HBR Srl - Calolziocorte (LC).

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Progresyvioji štampavimo staklė SACMA SP260 5 matricos – Kaip nauja – Puikiai veikianti Galima išbandyti HBR srl. Pilnai suremontuota Techninė informacija: Matricų kiekis: 5 Presavimo jėga: 800 kN Maks. atpjovos skersmuo 500N/mm²: 11,5 mm Maks. atpjovos ilgis: 85 mm Maks. spaudos išstūmimo eiga: 65 mm Maks. išmušimo eiga: 20 mm Darbo greitis: 275 vnt./min. Itodpfx Aewar Efolrsh Pagrindinio variklio galia: 30 kW Matricų skersmuo: 54 mm Matricų ilgis: 90 mm Išmušimo skersmuo: 45 mm Grynoji masė: 11.300 kg Bendroji masė: 13.000 kg Laukiame Jūsų HBR srl, Calolziocorte (LC)

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Ijdpfx Aljt Hw N Terjth Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Būklė: geras (naudotas), Gamybos metai: 2007, Mašina yra labai geros būklės. PROMOT krovimo ir iškrovimo stotis į pristatymo komplektą neįtraukiama. Itedpfexf Iamex Alrjh Prie mašinos yra įvairių įrankių / priedų. Techniniai duomenys apie mašiną pateikti paskutinėse dviejose nuotraukose.

Gamybos metai: 1988, būklė: geras (naudotas), Carlo Salvi 1-Matrize 2-Schlag Itsdpfxjhrdmxe Alrjh Modell 780/SV Maximaler Abschneidedurchmesser (mm): 6,35 Maximale Abschneidelänge (mm): 97 Maximale Ausstoßlänge (Stempelseite) (mm): 80 Maximale Geschwindigkeit (Stück/Minute): 360

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1970, Funkcionalumas: visiškai funkcionalus, veleno ilgis po galvute: 30 mm, dalies ilgis (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Iodpfx Alour N Dasrjth Year of manufacture: 1970 The machine is immediately ready for operation!

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Iedpfouz If Nex Alreth Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naudotas, TECHNICAL DATA Itedpfxouhb Uhj Alrjh - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: vadovas, darbinis plotis: 1 020 mm, lenkimo sijos reguliavimas: 46 mm, Lenkimo kampas (maks.): 135 °, bendras svoris: 340 kg, bendras ilgis: 1 350 mm, bendras plotis: 850 mm, bendras aukštis: 1 175 mm, Įranga: dokumentacija / vadovas, Ober- und Untermesser segmentweise herausnehmbar Inklusive manueller Hinteranschlag PNEUMATISCHER ZYLINDER!!! Max. Biegeleistung über die gesamte Arbeitslänge ----- 2,5 mm Itodpsga T A Dsfx Alrjh Max. Arbeitslänge ----- 1020 mm Max. Öffnungsbreite ----- 46 mm Breite der Finger ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. Biegewinkel ----- 0 - 135° Gewicht ----- 340 kg Breite ----- 1350 mm Tiefe ----- 850 mm Höhe ----- 1175 mm

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Itedpfxsw D Aq Te Alrjh Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories