Servopresas

Durendus Einständerpresse

Būklė: naujas, Gamybos metai: 2026, spaudimo jėga: 100 t, Single-column press – Manufacturer Durendus – 100 t C-frame press – Table 800 × 600 mm For sale is a hydraulic single-column press (C-frame) from Durendus with an adjustable pressing force of up to 100 t. This machine is suitable for versatile pressing, assembly, and forming tasks and can be newly manufactured at short notice as well as customized to your individual requirements. ==== Technical Data + Information: Hydraulic Single-Column Press – C-Frame – 100 t ==== General Specifications - Manufacturer: Durendus - Model: Single-column press - Design: C-frame press / Single-column press - Pressing force: 15 – 100 t (adjustable) - Installation height: max. 700 mm - Table size: 800 × 600 mm - Ram area: 800 × 600 mm - Table height: 900 mm - Dimensions (W × D × H): approx. 1,600 × 1,800 × 2,900 mm - Machine weight: approx. 4,800 kg - T-slots: as per customer specifications ==== Hydraulic Cylinder - Stroke: 0 – 500 mm (adjustable) - Working pressure: max. 245 bar - Return speed: 110 mm/s - Pressing speed: 5 – 12 mm/s - Rapid traverse speed: 140 mm/s ==== Hydraulic Unit - Pump: Bosch Rexroth - Delivery rate: 28 l/min - Motor power: 11 kW - Pressure accuracy: ± 5 bar - Valve: NG-50 - Installation: hydraulic unit mounted on top - Filter: Filtrec - Oil level monitoring: electronic - Cooling: air cooling ==== Control & Operation - PLC: Siemens S7-1200 - Touchscreen: Siemens SIMATIC Comfort 9" - Adjustable: pressure, stroke, speeds - Oil temperature display: available - Filter monitoring: available - Fault display: available - Remote access: available - Recipe memory: up to 100 programs ==== Modes of Operation - Manual (setup) - Manual (single stroke) - Automatic operation - Operation: two-hand operation and footswitch ==== Safety - Hydraulic ram locking - Top and bottom limit switches - Safety PLC - Light curtains (SICK / Keyence / Leuze), 700 mm - Monitored safety doors left and right ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor connection: 11 kW Nlsdpfx Asfu Nqxjbzjc - Total connected load: approx. 13 kW ===== Assembly applications, press-fit work, forming technology, serial production, tool making, maintenance Single-column press, C-frame press, hydraulic press, industrial press, production press, die setting press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives and European machine guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which is based on these regulations. Our core competence is special-purpose machinery and press automation. We offer customized hydraulic presses at surprisingly affordable prices. The hydraulics of our presses use primarily components from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 2017, Vamzdžio skersmuo (maks.): 80 mm, mandrilo ilgis: 4 500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Maximum tube loading length 4.5 m Robust and durable steel construction with a rigid, torsion-resistant connection – no twist-prone components such as a split construction between bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The touchscreen control panel allows for easy and intuitive programming and operation of the machine. After loading, the tube is clamped in the travelling chuck, ensuring precise tube positioning for dimensionally accurate geometries. Standard equipment also includes a check of tube geometry prior to bending: if the bending process is initiated from the wrong position, the machine will not start, preventing operator errors. Optional additional features provide more comfort, increase output, and enhance overall system efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is possible via USB stick or by FTP access from the computer to the machine control. USB or LAN ports (RJ45) are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard Equipment: → Electromechanical drive for the bending axis 4 kW → Bending speed 2.9 rpm (=17°/sec) → Bending direction: left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending spindle diameter 50 mm Nljdpfx Abettah Rozjc → Electronic length measurement ±0.1 mm → Electronic rotation measurement ±0.1° → Manual stop system (mechanical stops for length) → Manual indexing system (15° increments for rotation) → Three-jaw chuck for tube clamping on the carriage → External operator panel PLC Control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transfer via (W)LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. Once length and angle are entered, the system calculates the feed values and bending angles automatically. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-retract mandrel Options (can be ordered as extras): → Variable bending speed via frequency inverter or servomotors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on wheels) → Radius extension Images show a new machine.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Techniniai duomenys: Darbinis plotis: 2600 mm Lenkimo pajėgumas: 20,0 mm Palenkimas: 16,0 mm Viršutinio volo skersmuo: 330 mm Nledpox Ii Hvjfx Abzjc Vidurinio volo skersmuo: 300 mm Šoninių volų skersmuo: 240 mm Kūginio lenkimo įrenginys sukuriamas šoninių volų pakreipimu Mobilus valdymo pultas su skaitmeniniu ekranu Variklio galia: 11 kW CE žymėjimas Matmenys (ilgis x plotis x aukštis): apie 5800 x 2300 x 1900 mm Svoris: apie 11 t Papildoma įranga: Lenkimo pagalbinis įtaisas viršuje Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašinos būklė atitinka amžių pagal išvaizdą, techniką ir nusidėvėjimą; naudotos mašinos parduodamos be jokios garantijos.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, atviros grandinės įtampa: 87 V, suvirinimo srovė esant 60 % darbo ciklui: 270 A, suvirinimo srovė esant 100 % darbo ciklui: 220 A, įėjimo srovė: 25 A, apsaugos tipas (IP kodas): IP23, suvirinimo srovė (min.): 3 A, suvirinimo srovė (maks.): 300 A, įėjimo dažnis: 60 Hz, We offer this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Includes Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 If you have any questions or need further information, please feel free to send us a message or call us. Nsdpsy Sxkfjfx Abzolc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Sheet width: 3100 mm Sheet thickness: 6.0 mm mild steel Pre-bending: 4.0 mm mild steel Top roll diameter: 200 mm Side roll diameter: 165 mm Lower roll diameter: 190 mm Bending speed: approx. 5.0 m/min Control: DIGI Oil capacity: 80.0 litres Voltage: 380 V Nedpfx Abex Sr Dfozelc Total power requirement: 6.0 kW Weight: 6000 kg Dimensions (L-W-H): 5250 x 1500 x 1400 mm Very good condition (!!) Current new price approx. €85,000 Special price on request Equipment: - Robust electro-hydraulic 4-roll plate bending machine * 4-roll concept offers versatile bending and rolling options - MG swiveling control console * Operation & control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are directly driven by hydraulic motors - Conical rolling possible by tilting the rolls - Parallelism of side rolls via torsion shafts - Pre-bending possible on both sides - Diameters up to 1.1 times the upper roll diameter possible - Forged and hardened rolls, hardness 53–55 HRC - Low-maintenance, robust machine design - Continuous lubrication of all bearings - Rigid welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure display for rolls - Safety device (safety rope with switch unit) - Operating manual (PDF)

Būklė: naudotas, Gamybos metai: 1992, mašinos/transporto priemonės numeris: 150258, Offer 24348 Technical Specifications: Nledpfsut Uiqsx Abzoc - Pressing force, continuously adjustable: 15 t - Stroke, continuously adjustable: 150 mm - Mandrel bending device up to: 6,000 mm - Mandrel bending angle: 180° - Drive: 400 V / 4 kW - Space requirement approx.: W 1,500 x H 1,200 x D 1,100 / 7,500 mm - Weight approx.: 1,500 kg - Bending capacity - Horizontal bending, flat bar: 120 x 10 mm - Tube bending (pressure method) up to approx.: 1 1/2” - Mandrel bending up to: 42 mm - Press brake tooling - Pipe bending tools for horizontal bending - Steel mandrel bending tools approx.: 21.3 R 50; 26.9 R 57; 30 R 67; 33.7 R 72.5; 42.4 R 92.5 mm - Mandrel bending tools for plastic approx.: 10 R 60; 12 R 65 + 85; 17.2 R 100; 28 R 65; 33.7 R 120; 36 R 100

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2023, OEM – Marking Laser (Laser Safety Class 4) The beam source is a 20-watt fiber laser with a wavelength of 1064 nm. The marking area is 120 mm x 120 mm, with an optional upgrade to 300 x 300 mm. No external cooling is necessary. Power supply: 230 VAC / 50 Hz. Applications include laser engraving and material removal. The Weldmark 3 control software is installed on the supplied PC, running Windows 10 Professional. The laser head can be adjusted manually. Optionally, software-controlled linear axes and a rotary axis can be integrated. The control software language is selectable (German, English, French). The laser is prepared for integration into an overarching system but can also be operated as a stand-alone solution. For integration purposes, interfaces for interlock, emergency stop, external laser control, etc. are available. We are happy to support the customer in accordance with their requirements upon request. Nedpjn Atmvjfx Abzjlc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Techniniai duomenys: Darbinis plotis: 6500 mm Maks. lenkimo galia: 10,0 mm Maks. išankstinis lenkimas: 7,0 mm CNC valdymas Viršutinio volo skersmuo: 420 mm Šoninių volų skersmuo: 315 mm Vidutinio apatinio volo skersmuo: 400 mm Kūginio lenkimo įranga sukant šoninius volus Mobilaus valdymo pultas su skaitmeniniu ekranu Hidrauliniai atlenkiami guoliai CE ženklinimas Variklio galia: 22 kW Matmenys (ilgis x plotis x aukštis): apytiksl. 9200 x 2350 x 1900 mm Svoris: apytiksl. 39 tonos Papildoma įranga: Šoninė lenkimo pagalba Viršutinė pasukama lenkimo pagalba Būklė: Nlodsx Iitiepfx Abzsc Labai geros būklės, mažai naudota Darbo valandos: 100 val. Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašina pagal išvaizdą, techninę būklę ir nusidėvėjimą atitinka savo amžių; naudotos mašinos parduodamos be jokios garantijos.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1993, valdymo tipas: vadovas, automatizacijos lygis: vadovas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 280 mm, viršutinio volo skersmuo: 300 mm, šoninio volelio skersmuo: 280 mm, volelio skersmuo: 400 mm, vėjo ilgis: 4 050 mm, darbinis plotis: 4 000 mm, darbinio aukščio: 1 100 mm, maks. lakšto storis: 8 mm, plieno lakšto storis (maks.): 8 mm, nerūdijančio plieno lakšto storis (maks.): 6 mm, bendras svoris: 11 000 kg, bendras ilgis: 6 000 mm, bendras plotis: 1 450 mm, bendras aukštis: 1 510 mm, galia: 11,03 kW (15,00 AG), įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, 3 ritinėlių 4000x8 mm plokščių lankstymo staklės su pirminiu prilaikymu Modelis: Famar CPI4/6 TECHNINIAI DUOMENYS Plokštės plotis: 4000 mm Plokštės storis: 8 mm Pirminis lankstymas: 6 mm --- Naudinga ritinėlių darbinė zona: 4050 mm Viršutinio ritinėlio skersmuo: 300 mm Šoninių ritinėlių skersmuo: 280 mm 3 ritinėlių paviršius grūdintas Lankstymo ritinėlių padėties indikacija Priekinis hidraulinis segmento atidarymas — uždarytos kiauto iškrovimui Pailgintos ašys, skirtos papildomiems profilio lankstymo ritinėliams montuoti Kintamas valcavimo greitis iki 5 m/min Elektrinis variklis: 15 AG hidraulinei sistemai Galia: 15AG, 380V/50Hz Apsaugos įrenginiai su avariniu stabdžiu Matmenys: 6000x1450 x H1510 mm Svoris: 11 tonų Nlsdpoxnmb Ijfx Abzsc

Būklė: naujas, Sheet thickness: 6 mm Bending length: 3100 mm Top roller diameter: 210 mm Technical specifications: Nsdjd Ab Sdjpfx Abzjlc - Hardened and polished rollers - Complete frame made of ST-52 steel - The 4 rollers are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers powered by hydraulics and gearbox - Vertical movements of the lower roller are hydraulically driven - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roller support system (for special customer requirements) We have an extensive list of references!