Vienos kolonos piešimo presas - Hidraulinis

DUNKES HZT 6,3

Būklė: naujas, Pressure: 25 t Djdpfxjb U Hwps Aahjcd Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram area: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam switch gear Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: naujas, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating energy: 1370 Nm Single stroke energy: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Passage opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Dcjdpfx Aaob U Hwnshed Passage opening in table: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Būklė: labai geros būklės (naudotas), CTS Type: C-40/60 CTS Compact Climate Chamber, Air-cooled Test volume: 60 litres Temperature range: -40 °C / +180 °C Humidity range: 10% to 98% relative humidity +10 °C to +90 °C within temperature range +5 °C to +89.5 °C within dew point range Dimensions (W x D x H): Internal: 400 mm x 345 mm x 425 mm Housing: 560 mm x 845 mm x 1575 mm Refrigerant: R-404A Rated voltage: 230V 1/N 50 Hz Power: 3.3 kW Rated current: 13 A For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate Dcedpfxju Hlb Ee Aahjd 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data reserved!) For further questions, we are happy to assist you by phone.

Gamybos metai: 1977, būklė: naudotas, Pressing force: 200 t Stand width: 500 mm Stroke: 150 mm Ram surface: 320 mm Table surface: 470x400 mm Machine weight approx. 12 t Required space approx. 2000x2000x2700 mm Sick BWS safety light curtain for protection and cycle operation Two-hand control Mechanical fixed stop Dsdpelp Uz Uofx Aahecd Pressure switch Dwell time/pressure hold time Rapid working stroke Approved for manual loading/unloading operations

Būklė: naudotas, Single-column hydraulic press DUNKES Type HZT 2.5 Machine No. H94-2558 Year of manufacture: 1994 Press force: 2.5 tons Throat depth: 180 mm Table size: 420 x 300 mm Table opening: 60 x 185 mm Ram area: Ø 40 mm Clamping pin bore: Ø 20 mm Ram stroke: 160 mm Max. installation height: 250 mm Rapid downstroke: 65 mm/sec Rapid upstroke: 160 mm/sec Working speed: 8.3 mm/sec Table height above floor: 950 mm Hydraulic operating pressure: 135 bar Hydraulic tank capacity: approx. 100 liters Drive power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Installation height can be increased by 80 mm by shortening the piston rod Dcodpeh Uhqysfx Aahsd - Pressure and stroke shut-off - Two-hand operation at the machine - Stroke counter - Safe press control system with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for hand feeding operations) - 32,047 observed operating hours - Electrical and hydraulic schematics available Space requirement (L x W x H): 1100 x 980 x 1950 mm Weight: 700 kg Very good condition.

Būklė: naudotas, Gamybos metai: 1982, Technical details: Dcsdpfxerdlgio Aahsd Pressure: 2.5 t

Būklė: naudotas, Single-Column Eccentric Press MÜLLER GEFREES Type PDET 5 S/EK Mach. No.: Year of manufacture: 1988 Press force: 5 tons Throat depth: 125 mm Standard opening: 170 mm Table size: 280 x 220 mm Scrap hole: Ø 90 mm Ram area: 160 x 100 mm Stroke adjustment: 4 to 40 mm Ram adjustment: 30 mm Installation height (max. with largest stroke at top): 210 mm Stroke rate: 200 strokes/min. Clamping shank bore: Ø 25 mm Table height above floor: 900 mm Motor power: 0.55 kW Dcjdpfeik Srwjx Aahjd Power supply: 380 Volt, 50 Hz - Pneumatic clutch-brake combination - Electric foot switch - Control cabinet mounted on the machine Required space (L x W x H): 900 x 600 x 1700 mm Weight: 530 kg In very good condition

Būklė: naujas, Drawing cushion stroke: 200 mm Drawing cushion Manual and automatic operation Dsdpfxod Ab Iko Aahjcd Self-lubricating ram guides Manufactured according to CE regulations Light barrier Pressing force: 30 t Pressure: 160 bar Table: 900 x 600 mm Ram dimensions: 800 x 500 mm Table bore: 80 mm Stroke: 300 mm Installation height: 550 mm Rapid traverse: 100 mm/s Working speed: 18 mm/s Return speed: 165 mm/s Motor: 11 kW Drawing cushion: Pressing force: 12 t Stroke: 150 mm Pressure: 130 bar Return speed: 100 mm/s Dimensions: 250 x 250 mm Length: 1,670 mm Width: 1,520 mm Height: 2,850 mm Weight: 6,000 kg

Būklė: naudotas, Single-column hydraulic press SCHÖN Type FES / C 7 Machine no. 4281 Year of manufacture: 1995 Pressing force: 7 tons Throat depth: 170 mm Throat depth rotary indexing station: 60 mm Table size: 310 x 200 mm Rotary indexing table: Ø 400 mm, with 12 indexing stations Ram area: approx. Ø 100 mm Ram plate: 315 x 200 x 35 mm Ram stroke: 100 mm Installation height rotary table to ram plate max.: 130 mm Table height above floor: 890 mm Dcsdper I E Itofx Aahsd Ram speed rapid downstroke: approx. 300 mm/sec Ram speed rapid upstroke: approx. 300 mm/sec Ram speed working stroke: approx. 30 mm/sec Drive power: 1.5 kW Electrical connection: 380 Volt, 50 Hz Tank capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time at bottom dead center - Electric two-hand control Space requirements (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition