Rotaciniai suvirinimo stalai

DUMETA D-TLP-020

Sąlyga: naujas, Gamybos metai: 2024, 600 kg load capacity Height-adjustable welding turntable with 100 mm through-hole Gbodpfx Aog Tdpgsbdsg Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Height when tilted min. 0.45 m, max. 0.95 m Speed from 0.01 to 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Gbedsd Ab H Hopfx Abdsg Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2014, veikimo valandos: 15 000 h, Atlas Copco kompresoriaus pakopa po regeneracijos. Gedpfxomzbdwj Abdebg

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Load capacity horizontal: 300 kg, tilted: 150 kg Gbsdpfx Ajrypmgsbdeg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor, infinitely adjustable from 0 to 90° Speed continuously adjustable from 0.01 to approx. 5 rpm Includes foot remote control Digital display with welding time limitation (optional)

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 5 000 kg, Complete set including manual and dual foot remote control Digital speed display Hydraulic height adjustment Gjdpfjl Dq U Uex Abdebg Dimensions: Minimum tilted height: 800 mm Maximum tilted height: 1900 mm Minimum horizontal height: 1050 mm Maximum horizontal height: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed range: 0.01 to approx. 0.9 rpm CE certified

Sąlyga: beveik kaip naujas (parodų įrenginys), 3,000 kg welding positioner, hydraulically height-adjustable Gbsdpfjdvn E Usx Abdsg Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilt angle: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical plate (up to center): 960 mm to ~1,910 mm Dimensions with horizontal plate: 1,200 mm to 1,900 mm

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (naudotas), Dumeta welding positioner, hydraulically height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole 100–200 mm Gbjdehua Dqspfx Abdog Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Height when tilted: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 – 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Gamybos metai: 2025, Sąlyga: naujas, The RS-9 has been specifically designed for the efficient and trouble-free processing of a wide range of paper types. The parameters are customized according to the machine with which it is to be operated. The shredder enables quick and secure shredding of paper, which is taken directly from the die-cutting machine, allowing easy transport to the baler via a conveyor system. The RS-9 shredder is engineered for shredding waste from a die-cutting machine to enable easy transportation via a conveyor belt system. Our shredder is very easy to operate. It is equipped with Siemens controls for overload protection and an overload sensor that monitors motor operation. The RS-9 features the ability to reverse the shafts, ensuring worker safety and extending the device’s service life. The machine comes with a frequency inverter, providing soft start functionality and precise motor control. Gedpfxeiklxbo Abdjbg Feel free to contact us.

Sąlyga: naujas, Original Siegmund welding table perforated plate Octagonal, 2D or 3D 1200 x 200 mm with 28 mm holes 514 kg, diameter 1300 mm Plasma-nitrided Original price: €8,900 Half price when purchased together with a positioner Sale only possible in combination with a positioner Gbsdpfx Abet Sk Ndsdog Hole pattern: 8 holes, 500 x 500 mm, 18 mm diameter (see photo)

Gamybos metai: 2018, Sąlyga: beveik kaip naujas (parodų įrenginys), Welding Positioner KT 50 Horizontal load capacity: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, Width: 650 mm Gbodpfx Aod A Etyjbdsg Stepless tilt adjustment via geared crank motor: 0–90° Speed: 1.7–15 rpm Including foot remote control