Gomurys gręžti WU 3G 2002 METŲ ŽEMĖS SKLYPAS

drill gomad WU 3G 2002 YEAR LIGNUM drill gomad WU 3G 2002 YEAR LIGNUM

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Nwodpfsu Uh T Dex Aghjp Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naujas, Gamybos metai: 2024, SEMI-AUTOMATIC DRILLING SYSTEM “UNIBOHRFIX 50” With the UniBohrFix 50 drilling system, all profiles can be processed either against a stop or using the gripper clamp. Drilling is performed manually via a lever, while materials are automatically positioned to the next drilling location along the X-axis. Conveniently execute entire drilling programs, or use the stop plate for rapid single hole operations. The system is suitable for weights up to 100 kg. Additionally, the unit includes a minimum quantity spray unit with holder and spray can. For technical specifications of the standard version, refer to the table. All system components can be configured to your requirements. You may choose from various drill units, roller conveyors, positioning systems, and vices. Plantec configures the system to fit your needs perfectly! ADVANTAGES - Series of holes are drilled at precise intervals automatically. - Operating errors are drastically reduced. - Programming takes only a few minutes. - Excellent price-performance ratio. - Significant reduction in required labor. Standard measuring lengths: 3,000 mm 6,000 mm Drill unit: Unimax 2 T Spindle: MK2 Continuous drilling capacity: 18 mm Speed ranges: 100-2000 rpm, 200-4000 rpm Throat depth: 225 mm Nwjdpfx Agsgwt Sljhjp Distance spindle/table: 60-400 mm Adjustable vice with linear measurement readout Positioning length stop: PD-100e Control for automatic positioning Positioning: absolute or incremental Easily readable LED display Carriage with DC servo motor Positioning accuracy: +/- 0.1 mm/m Stop arm with spring dampening Stop plate with groove Programmable controller with 3,000 memory slots Roller conveyors: RD-200/3 Load capacity: 200 kg/m Roller width: 290 mm Roller diameter: 40 / 50 mm Insert plates Bracing for stabilization Control cabinet Available options: - Minimum quantity spray system with spray head and holder - Gripper clamp for securing material to the stop plate

Sąlyga: naujas, Tipas: 1000-2S Darbinis plotis: 1000 mm Minimali darbinio ruošinio ilgis: 400 mm Darbinis storis: 2–80 mm Šlifavimo volo greitis – dažnio valdymas Nwedsm Dr Rnjpfx Aghep Padavimo greitis: 5–20 m/min Bendra variklių galia: 4,12 kW Transportavimo matmenys: 1700 × 1600 × 1400 mm Svoris: 800 kg Kaina: 4130 Eur (EXW Jonava, Lietuva)

Sąlyga: naujas, Gamybos metai: 2023, Working width: 600 mm Working height: 280 mm Nodpfxsmftk As Aghswp Minimum workpiece length: 250 mm Units: 2 brush assemblies, centrally adjustable and each with individual fine adjustment Diagonal brush technology: Yes, steplessly adjustable from -7° to +7° 1st brush: Metal brush, diameter 220 mm 2nd brush: Tynex brush, grit 80, diameter 220 mm Height adjustment: electric Height display: mechanical counter (mechanical tally counter) Feed speed: 4 - 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: 1.5 m Machine width: 1.5 m Weight: 700 kg

Sąlyga: naujas, Gamybos metai: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Nsdpji Hpk Uofx Aghswp Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Machine width: 900 mm Weight: 500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access safety guard - Foot pedal Njdpfx Ajn Smtqsghjwp Motor power: 11 kW Machine dimensions (LxWxH): 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Sąlyga: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Nwsdpfx Aoh Rdwxsghsp Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Sąlyga: naujas, Thread diameter: M3 - M16 mm Infinitely variable speed, max. 187 rpm Nwodpfxjfg U Sqj Aghop Working range: 180 - 2000 mm Motor power: 0.7 kW Electric tapping machines for thread sizes M3 - M16, adjustable angle. Includes 9 quick-change chucks with slip clutch. Adjustable via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional accessories: Clamping table with T-slots: 990x700x800 mm Magnetic base Also available for: M14 to M24 and M27 to M33.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007734, Darbinė sritis X ašis: 3050 mm Darbinė sritis Y ašis: 850 mm Pagrindinio veleno galia: 5 kW Gręžimo velenų skaičius: 19 Nwedpfx Aew Idb Hjghjp

Gamybos metai: 1985, Sąlyga: geras (naudotas), COMPLETE PAINTING LINE WITH THE FOLLOWING STATIONS: 1. COATER FOR WATER-BASED PRIMER 2. OVEN WITH UV + IR LAMPS Njdok Scufopfx Aghjwp 3. DOUBLE COATER WITH REVERSE SYSTEM 4. UV LAMPS 5. DOUBLE COATER 6. UV LAMPS 7. DMC SANDER 8. CONVEYOR 9. SORBINI TOUCH-UP STAIN COATER 10. IR LAMPS 11. FINISHING ROLLER 12. UV LAMPS 13. OUTFEED CONVEYOR