Malūnas su ištraukimo sistema

DREHER S 20/20 VS

Gamybos metai: 1994, būklė: geras (naudotas), Used M-Tec Ploughshare Mixer Hjdpfx Aasir E E Ej Dor Model: MS-150 Batch Mixer Minimum mixing volume: 350 dm³ Maximum mixing volume: 1500 dm³ Motor: 37 kW, 115 rpm Includes Specicon sampling unit

Būklė: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) Hodpfsg Ezarjx Aa Dsr - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), EXTRUDEX ekstruderis EN50-30D, pagamintas 2007 m., Nr. 4101264, su išlydžio siurbliu, tinklelių keitikliu ir 5 sluoksnių žarnos formavimo galvute. Pagamintas 2007 m. Taip pat 4 koekstruderiai EXTRUDEX EN25-25D, pagaminti 2007 m. PASKIRTIS: PE 5 sluoksnių žarnos gamyba. Hodpfx Aasvyaxue Der Maksimalus skersmuo – 32 mm. ĮRENGINYS: 1 vienos sraigtinės pagrindinis ekstruderis EN 50. 4 vienos sraigtiniai koekstruderiai. Ekstruzijos įranga yra mano nuosavybė. Vieta: D-26345 Bockhorn-Grabstede, Bahnhofstr. 6, Vokietija.

Būklė: paruoštas naudoti (naudotas), Inkjet printer for frame bending machine Length: 800 mm Width: 1000 mm Height: 1900 mm Weight: approx. 100 kg Hodpfx Aehzgtusa Der

Būklė: naujas, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 Hedpfx Asf Ddzqea Djr 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2-M929 M1256 664P118-056-017-R-A2-M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF as well as other types, as a package

Būklė: labai geros būklės (naudotas), Gamybos metai: 1976, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, Įranga yra puikios būklės ir puikiai veikia. Tai labai greita mašina, atnaujintas jos pakabinimo mechanizmas. Parduodama, nes planuojama pasitraukti iš darbo. Likusi įranga ir komplektacija taip pat bus parduodama ateityje. Tarp jų – trys CNC staklės, du krautuvai ir kt. Hsdpfxenyiyas Aa Dor Visų prekių nuotraukose nėra, nes galima įkelti tik 15 nuotraukų. Dėl nuotraukų kreipkitės.

Būklė: naujas, Dedikuota mašina, skirta tiesios griovelio / išpjovos įvairoje medienos gaminių, naudojamų baldų gamyboje, bendrosiose staliaus dirbtuvėse, sodo baldų, sandėliukų, gegnių ir karkasinių konstrukcijų gamyboje, įpjovimui. Taip pat gali būti naudojama durų rėmų gamybai, gegnių atramų įpjovimui ir rąstinių namų gamyboje. Standartiškai įrengta horizontaliomis pneumo spaustuvėmis ruošiniams bei hidrochekinio amortizatoriaus valdymu, kuris užtikrina tolygų frezos eigos judėjimą. Tikslus rutulinių guolių judėjimas grūdinto plieno kreiptuvais. Tvirta lieto ketaus konstrukcija su plieniniu pagrindu. 3 kW variklis. Didžiausias įrankio skersmuo 250 mm. Įrankio vidinis skylės diametras 40 mm. Frezos variklio rankenėlės aukščio reguliavimas. Didžiausias išpjovos / griovelio gylis – 60 mm. Griovelio / išpjovos plotis – 60 mm per vieną pravažiavimą. Hedpfx Ajdy Hm Dsa Dor Maksimalus įrankio eigos ilgis – 250 mm. 2 horizontalūs ruošinio spaustuvai. Hidrochekinis skersinio pjovimo svirties amortizatorius. Dulkių nutraukimo jungtis – 100 mm. Mašinos stovas.

Gamybos metai: 1981, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can also be processed. The plant has been in operation until now and can be inspected at any time in Nuremberg. The plant consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to a maximum width of 330 mm Calender Hjdpju Ttf Njfx Aa Dsr Total roll width: 1,200 mm Net roll width: 1,100 mm (max. film width) Haul-off unit and flying shear

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized Hedpeh Ek Dasfx Aa Dor - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort Hjdpfxjiu Smbj Aa Dor 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package