Kitas

Doppstadt DW 2560 E1 / Elektro / Shredder

Gamybos metai: 2026, būklė: naujas, Oscillating Screen Machine Series ASM S&F oscillating and flat screens are used in various sectors of the wood processing industry (sawmills, pellet plants). Screening machines of the "ASM" series are used to screen wood chips, wood pellets, sawdust, old wood, biomass, and many other sawmill by-products in both dry and wet conditions. The gentle, horizontally circular screening motion of the inclined screen box ensures high screening precision. One advantage of this screen is that long and fibrous particles slide obliquely or tangentially across the screen surface, which, unlike with vibrating screens, prevents clogging and pinching of particles. Additional advantages include its robust design, high screening capacity, and long, low-maintenance service life. In addition to standard dimensions, the company also supplies the "ASM" series as a customized split-version solution for existing plants. This makes it possible to install new screens even in confined or hard-to-access spaces within existing facilities or sawmills. ASM series screening machines provide screening areas from 0.5 to 15 m² per deck (up to 30 m² as double-deckers) and are characterized by high screening capacity (up to 350 m³/h, depending on material). At a glance: - Ideal for: wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuels - Applications: wood industry, recycling and waste management, animal feed Chodpfoin Ey Sjx Ag Ijb - Screening area: 0.5 – 15 m² (30 m² as double-decker) - Screening capacity (material dependent): up to 350 m³/h - Cut size: 0.1 – 150 mm (depending on machine size) - Drive power: 0.55 – 15.0 kW (depending on machine size) Advantages: - High screening capacity - High separation precision - No clogging or pinched particles - Low noise and maintenance - Flexible application - Custom manufacturing Need more information? Contact us—we'll be happy to advise you!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 2 852 h, Funkcionalumas: visiškai funkcionalus, Parduodamos mobilios laužo žirklės Akros Henschel. Mašinos būklė labai gera, jas galima apžiūrėti bet kuriuo metu. Cjdjx N Tw Ujpfx Ag Ishb

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral Codpfx Aoud H Dmeg Iehb WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Gamybos metai: 1997, būklė: naudotas, Pagaminimo metai: 1997 Didžiausias krūvos aukštis: 400 mm Didžiausias sluoksnių aukštis: 250 mm Chsdpec Rhr Sofx Ag Iob Įėjimo aukštis: 700–1300 mm Išėjimo aukštis: 890 mm Didžiausias našumas: 60 000 vnt./val. Bendroji masė: 980 kg (apytiksliai)

Būklė: naudotas, LVD žirklės Tipas HST C-10/31 Chodsx Tqtbjpfx Ag Ijb Galingumas 3000 x 10

Būklė: naujas, Gamybos metai: 2024, Padavimo grandinė. Stepfeeder. Skirta rąstų padavimui ir atskyrimui. Aukštis nuo 1,0 m. Chedpfx Agjudzycj Iob Plotis nuo 1,8 iki 6 m Medžiagos skersmeniui nuo 5 iki 20 cm Greitis iki 20 vnt./min. Hidraulinė Automatinis padavimas

Gamybos metai: 2022, būklė: beveik kaip naujas (parodų įrenginys), Overband Plate Magnet Construction in stainless steel 1.4301, fully welded including drawer for cleaning Cjdpfx Asd Evl Ajg Ijhb 600 x 500 x 180 mm Fully welded housing Lifting eyes for suspension

Būklė: geras (naudotas), Gamybos metai: 1998, valdymo tipas: NC valdymas, ritinėlių skaičius: 4, apatinio volelio skersmuo: 540 mm, viršutinio volo skersmuo: 560 mm, šoninio volelio skersmuo: 420 mm, volelio skersmuo: 440 mm, vėjo ilgis: 3 100 mm, bendras svoris: 45 000 kg, bendras ilgis: 8 700 mm, bendras plotis: 2 900 mm, bendras aukštis: 3 075 mm, galia: 81 kW (110,13 AG), Minimum bending diameter: 640 mm Press force against upper roll: 5,800 kN Cone bending device Centralized lubrication system Cedpfx Agezbqquj Iehb Equipped for roll change (quick-change system) Roll width: 3,100 mm Sheet thickness at 3 x upper roll Ø: 50 mm Sheet thickness at 5 x upper roll Ø: 60 mm Sheet thickness for pre-bending: 40 mm Upper roll Ø: 560 + 440 mm Lower roll Ø: 540 mm Side roll Ø: 420 mm Number of rolls: 4 Bending speed: 0–6 Lower roll adjustment: 0–200 mm/min. Side roll adjustment: 0–500 mm/min. Number of driven rolls: 2 Power: 81 kW Length: 8,700 mm Width: 2,900 mm Height: 3,075 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute any representation or contractual terms. We recommend that you verify all important details.

Būklė: naujas, Gamybos metai: 2025, Bendra informacija Naudojimo paskirtis: Statyba Nuorodos numeris: 2 Svoris Savaiminis svoris: 500 kg Funkcionalumas CE ženklinimas: taip Būklė Bendra būklė: labai gera Techninė būklė: labai gera Išorinė būklė: labai gera Csdpfx Aoq Ixunog Ijhb Papildoma informacija Tinka šioms mašinoms: 5-12 t Pristatymo sąlygos: EXW Darbinis slėgis: 190-210 bar Gamybos šalis: KR Daugiau informacijos suteiks Ö. Inalkac.

Būklė: reikia remonto (naudotas), Gamybos metai: 1987, mašinos/transporto priemonės numeris: 90071000, ryšulio plotis: 300 mm, ryšulio aukštis: 300 mm, bendras svoris: 15 000 kg, Šiuo metu „šoninis spaustuvas“ yra užstrigęs, nes medžiaga (lakštai) pasislinko po šoniniu bloku ir užstrigo. Chedpfxsy Tlzao Ag Ieb