CNC tekinimo staklės

DOOSAN Puma 700 M II

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. Ksdpexmhdnefx Abrowu For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: naudotas, Gamybos metai: 2019, Swing diameter 400 mm Turning length 584 mm Swing over bed 750 mm Control Siemens 828 D Shop Turn Spindle bore 81 mm Spindle speed: 3500 rpm Spindle drive 18.5/22 kW Spindle torque 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Speed of driven tools 5000 rpm Milling spindle drive: MK 5 kW y-axis +/- 60 mm Rapid traverse 30/30/10 m/min Tailstock MK 5 Dimensions (L x W x H) 4.6 x 1.9 x 2.1 m Machine weight approx. 6.65 t Flat-bed CNC lathe with driven tools and Y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in the door - Signal lamp - 2 + 2 driven tool holders - Various fixed tool holders - Flat guideway - Tool measuring arm Ksdpfjww Nazex Abrewu - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping

Sąlyga: geras (naudotas), Gamybos metai: 2006, Technical data Ø: 400 to 1000 mm Rectangular: 100 x 400 mm to 1000 x 1100 mm Kedpfx Aev Tztyobrswu

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 671 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: Heidenhain TNC7, ruošinio svoris (maks.): 1 100 kg, stalo plotis: 800 mm, stalo ilgis: 616 mm, sukimosi greitis (min.): 20 aps./min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Heidenhain TNC7 Velenas HSK-A63 16000 min-1 30 įrankių vietų Standus tvirtinimo stalas 800x616 Vidinis aušinimo skysčio tiekimas 40 barų su popierinės juostos filtru Grandininis transporterio grandiklis Rankinis ratukas BLUM LC53-Digilog įrankio lūžio / matavimo sistema Kwjdpfx Abjyf E Atoreu Matavimo zondas BLUM TC Mašinos veikimo laikas: 671 h Veleno veikimo laikas: 61 h Mašina apie 6 mėnesių senumo. Parduodama pagal kliento užsakymą. Apžiūra įmanoma iš anksto susitarus.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] Kodpouhazgefx Abrjwu - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 77 711 h, X ašies eiga: 650 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, valdiklio modelis: Heidenhain iTNC530, greitasis eiga Z ašyje: 45 000 m/min, greitas poslinkis X ašimi: 45 000 m/min, greitas poslinkis Y ašis: 45 000 m/min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Hermle C30 U Siemens 840D Mašinos įjungimo laikas: 77711 val. Spindulio įjungimo laikas: 16294 val. - HSK-A63 10000 min-1 velenas - 32 įrankių vietos - SRT 280 mm apvalus stalas su integruota fiksavimo sistema SK50 (jei nereikalinga, galima uždaryti arba perkonstruoti į nulio taško fiksavimo sistemą) - Išorinis aušinimo skysčio padavimas - Vidinis aušinimo skysčio padavimas su popieriniu juostos filtru 80 bar - Drožlių nupūtimo pistoletas - Drožlių transporter - Rankinis valdymo modulis - Automatinės kabinos durys - 32 įrankių vietos plius dar 87 ZM87 vietos - Terminė kompensacija - BLUM įrankių matavimo sistema šone - Renishaw matavimo jutiklis - Drožlių konteineris - Būsenos šviesos indikatorius Mašina visiškai patikrinta, yra geometrijos protokolas ir apskritimo tikslumo bandymų matavimai. Mašiną galima bet kada apžiūrėti ir išbandyti įjungtą. Kodpfexcp R Iox Abrewu Labai gerai prižiūrėta būklė.

Sąlyga: naudotas, Gamybos metai: 1999, x-axis travel 2000 mm y-axis travel 800 mm z-axis travel 850 mm Control system: HEIDENHAIN TNC 360 Total power requirement: / kW Machine weight approx.: / t Kodpov H Ertjfx Abrewu Space requirement approx.: / m

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 250 mm, sukimosi skersmuo virš skersinio stumduko: 500 mm, tekėjimo skersmuo: 390 mm, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, X ašies eiga: 450 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 1 300 mm, strypo praėjimas: 65 mm, bendras aukštis: 2 700 mm, bendras ilgis: 7 000 mm, bendras plotis: 3 000 mm, bendras svoris: 12 000 kg, Įranga: dokumentacija / vadovas, Manufacturer: DMGMORI Model: CTX beta 1250 TC Year of manufacture: 2008 (Retrofit in 2022) Control: Siemens 840D Solutionline Number of axes: 5 axes Equipment: - Automatic tool changer - Swivel head as B-axis - Belt filter system with high-pressure coolant and chip conveyor - Differential pressure chucking main/sub spindle Kwedpfeubyv Rsx Abrou - Workpiece pick-up device - Bar feeder preparation (optional available) Technical Data: Max. turning diameter: 500 mm X-axis: 450 mm Y-axis: 100 mm Z-axis: 1300 mm B axis: 220° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 34 kW Sub spindle speed: 6000 rpm Sub spindle through-bore: 52 mm Sub spindle power: 20 kW Tool changer: 24 positions B-axis interface: HSK 63 B-axis spindle speed: 12000 rpm B-axis power: 22 kW Installation dimensions approx. L 7000 / W 2300 / H 2300 mm Weight approx. 8,000 kg Chip conveyor: Yes Coolant system: Yes Internal coolant supply: Yes Options: - Full enclosure - CNC-controlled swivel head as B-axis - Coolant system and chip conveyor - Documentation - Geometrically within new machine tolerances Condition: - Machine fully functional - Geometry within manufacturer’s new machine tolerance - All wear parts replaced Retrofit 2022: - Linear guides Z1 and Z2/3 replaced - Linear guide Y-axis replaced - Main and sub spindles overhauled - Milling spindle overhauled - B-axis (bearings and clamping) replaced - Telescopic covers overhauled - Hoses and cables overhauled, drag chains serviced - Cabin doors repainted, inspection windows replaced - Maintenance according to manufacturer’s specifications performed

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermal Neutral Range: 80 – 120 °C Kwodpfoph Uk Nox Abrsu Number of Operator Sides: 1 side Forces: - Maximum Pressing Force: 4000 kN - Maximum Uplift Force: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 seconds Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Maximum Opening Width: 800 mm - Stroke: 800 mm - Table Height above Floor: 1,100 mm - Total Height above Floor (Construction Height): approx. 4,300 mm - Minimum Hall Height: 5,500 mm Parallelism Deviation at 20°C: +/- 0.1 mm Deflection: - Determined at maximum closing force with 70% utilization:

Sąlyga: naudotas, Gamybos metai: 2011, Mazak HC Nexus 5000-II Mazatrol Matrix Nexus Baujahr: Juli 2011 Palettengröße: 500 x 500 mm Verfahrwege: - X: 730 mm - Y: 730 mm - Z: 740 mm Spindeldrehzahl: 12.000 U/min Werkzeugwechsler: 40 Plätze Ksdpfxjv Tvh Se Abrjwu Späneförderer: Chrom