Vertikalus apdirbimo centras

DOOSAN DNM 650 II

Sąlyga: naudotas, Gamybos metai: 2014, DOOSAN DNM 650 II Machining Center Year of First Installation: 2014 CNC: SIEMENS SINUMERIK 828 D Table Dimensions: 1,300 mm x 670 mm Maximum Table Load: 1,000 kg Travel Paths: - X: 1,270 mm - Y: 670 mm - Z: 625 mm Tool Magazine: 30 Positions Lasdpfx Afowcg I Te Aei Taper: ISO 40 Maximum Spindle Speed: 12,000 rpm Internal Spindle Cooling / High Pressure Spindle Motor Power: 15 kW Machine in Excellent Condition Complete with Full Documentation Weight: 8,500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis travel: 260 mm - Z Axis travel: 590 mm - Y Axis travel: +/- 50 mm - Maximum Turning Diameter: 356 mm - C Axis increment: 0.001° - Maximum Turning Length: - Cutting Feed Rate (X, Z, Y): - Swing Over Bed: - Swing Over Carriage: - Bar Capacity: Ø 65 mm (main) - Rapid Traverse Max. (X, Z): - Main Spindle: 12” - Spindle Speed: 5,000 rpm - Spindle Power: 18.5 kW - Torque (Nm): - Main Spindle Bore: - Main Spindle Nose: A2-6 - Sub Spindle - Spindle Speed: 6,000 rpm - Spindle Power: 11 kW - Torque (Nm): - Sub Spindle Bore: - Sub Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed: 6,000 rpm Laedpfxjwdrfgs Af Aji - Driven Tool Power: 5.5 kW EQUIPMENT: - Chip Conveyor - Three-color Status Lamp - Fixed Tool Holders - Parts Catcher MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Gamybos metai: 1997, Sąlyga: geras (naudotas), Ibarmia CNC machining center offered. Type: ZVL 3000 Control: Heidenhain TNC 426 CB X travel: 2200 mm Y travel: 800 mm Z travel: 600/800 mm Table: 850 x 2600 mm Max. table load: 3,500 kg Spindle: SK 40 with coolant Max. speed: 4,000 rpm Ledpfxsh Hp Uno Af Aeai Tool changer: 40 positions Power: 47 kW Included: Documentation, parameters, tool holders, chip conveyor, and central lubrication Year of manufacture: 1997 Dimensions: 625 x 305 x 340 cm (LxWxH) Weight: approx. 12,000 kg Video available! For more information, please call us or send us an email.

Sąlyga: naudotas, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar Capacity: 205 mm Workpiece Clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece Clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of the spindle head) Tool Turret (X/Y/Z): Technology: 12-station turret Tool Interface: BMT 75 Driven Tools: 3,000 rpm, 7 kW, 83 Nm Travel in X/Y/Z: 340/160/3,250 mm Rapid Traverse in X/Y/Z: 20/7/12 m/min Tailstock: Technology: Programmable quill, dragged tailstock Stroke: 150 mm Taper: MT5 Equipment/Accessories: Chip Management: Chip conveyor Coolant Management: High-pressure coolant pump (IKZ) Ledpfx Afjwt Iwqs Ajai Tool Measurement: Measuring arm, Renishaw RP3 Oil Mist Extraction: Mechanical separator, manufacturer AR Filtrazioni ARNO 3VF YF Shaft Machining: Manual steady rest, ø150-300 mm Tool Holders: Various fixed and driven holders Setup Operation: Electronic handwheel Additional Features: Automatic door (pneumatic), transformer, oil skimmer Other Accessories: Various jaws and EWS quick-change adapters

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 9 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 000 mm, FREZAVIMO / GRĘŽIMO STAKLĖS SU JUDANČIA KOLONA CME TECHNINĖS CHARAKTERISTIKOS CME – GALIMA APŽIŪRĖTI VEIKIANČIĄ Lasdeu R Rk Hjpfx Af Asi Gamintojas: CME Modelis: MB 9000 Metai: 2007 CNC: Siemens Sinumerik 840D X ašis: 9000 mm Y ašis (vertikali): 4000 mm Z ašis: 1000 mm W ašis (Ø 150 mm): 700 mm 2 rotaciniai-slankiojantys stalai (linijinis judesys: 2000 mm) 2500 x 2500, talpa 25 t Heidenhain optinės liniuotės visose ašyse Tiesioginė galvutė Įrankių keitiklis 90 pozicijų ZF rėžio keitimas Vidinis aušinimas Drožlių ištraukėjai

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 1 139 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 599 mm, tekėjimo skersmuo: 530 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 530 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 599 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, Outstanding machine with the option for integration with a brand new IEMCA Master 52 bar feeder, featuring only 1,100 operating hours. Ledpfxsvv Tvfs Af Aoai Multitasking capability enables simultaneous milling and turning operations. Rugged and precise construction with a rigid cast iron frame. Dual tool magazines: Revolver turret plus an internal magazine housing an additional 12 CAPTO tools stored securely inside, 12 tools mounted on the turret, and 6 hybrid square 25 mm tool holders (refer to the attached technical data sheet). Twin spindle design allows for secondary operations. Equipped with Fanuc 0i-TF CNC and Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Full documentation provided. Also equipped with transformer, chip conveyor, 15-bar coolant pump, presetting device, parts catcher and finished part output conveyor, and work lamp.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 1 730 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 760 mm, sukimosi skersmuo virš skersinio stumduko: 780 mm, tekėjimo skersmuo: 376 mm, ašies variklio galia: 22 W, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 82 mm, X ašies eiga: 260 mm, Y ašies eiga: 105 mm, Z ašies eigos atstumas: 830 mm, tvirtinimo skersmuo: 24 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 30 m/min, strypo praėjimas: 80 mm, tvirtinimo įvorės skylė: 80 mm, Strypo skersmuo (maks.): 80 mm, CNC Turning-Milling Center Doosan Puma 2600 SYII with Fanuc i Series Control including Accessories The machine has been used very little, with approximately 1,730 power-on hours, so it is as good as new and will be available from 01.01.2026. Additional accessories for the Doosan Puma 2600 SY II lathe: - 2 tool holders for external turning tools 25x25 - 1 double tool holder for external turning tools 25x25 - 1 tool holder for face machining 25x25 - 2 tool holders for internal turning tools (boring bars) diameter 50 mm - 1 double tool holder for internal turning tools diameter 32 mm - 1 parting tool holder - 1 double right-hand tool holder for external tool (sub-spindle) - 1 double left-hand tool holder for external tool (main spindle) - 4 driven tool holders ER-32 radial (X axis) Lsdpjxauwbefx Af Aoai - 5 driven tool holders ER-32 axial (Z axis) - 1 driven tool holder ER-32 radial (X axis) with internal coolant supply - 1 driven tool holder ER-32 axial (Z axis) with internal coolant supply - 1 three-jaw chuck for main spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 three-jaw chuck for sub-spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 collet chuck for main spindle + one collet each diameter 50 mm + 30 mm - 1 collet chuck for sub-spindle + one collet each diameter 50 mm + 30 mm - 1 set of reduction sleeves for diameter 50 (10 pieces) - 1 set of reduction sleeves for diameter 32 (7 pieces) - 1 set of adapters for driven tool holders (ER 32 collet, Weldon, milling arbor) - Flushing device with emulsion on main spindle for automatic cleaning of chuck jaws - Device for automatic cleaning of chuck jaws with compressed air - Additional high-pressure pump for internal coolant supply (for drilling with indexable insert drill) - Function for automatic machine shutdown (the machine also switches off the main switch, thus disconnecting the power supply) - Connection for automatic bar feeder magazine Iemca

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 2 315 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 500 mm, sukimosi skersmuo virš skersinio stumduko: 400 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 15 000 W, veleno greitis (min.): 35 aps./min, veleno greitis (maks.): 50 000 aps./min, veleno skylė: 75 mm, Z ašies eigos atstumas: 580 mm, greitas poslinkis X ašimi: 33 m/min, greitasis eiga Z ašyje: 33 m/min, bendras aukštis: 1 700 mm, bendras ilgis: 2 630 mm, įvorės išorinis skersmuo: 210 mm, bendras plotis: 1 700 mm, Strypo skersmuo (maks.): 66 mm, plunksnos brūkšnys: 500 mm, sūpynės skersmuo virš skersinio vežimo: 660 mm, veleno nosis: 6, bendras svoris: 4 500 kg, MAZAK QUICK TURN 200 Smart Operating Hours: Automatic Cycle: 2,330 hours Condition: Very good condition, regularly serviced and consistently maintained! Capacity & Working Area Max. swing diameter: Ø 660 mm Max. turning diameter: Ø 350 mm Laedpfxewzkzze Af Aoi Max. bar diameter: Ø 66 mm Max. machining length: 520 mm Main Spindle Max. speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: Morse taper NC axis, pressure control via M-codes Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinge belt chip conveyor Coolant pump 8 bar & chip flushing General Specification: SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard color NC-controlled tailstock Tailstock pressure adjustment Tailstock with fixed centre mounting Operator door with safety interlock Double foot switch Fully enclosed work area Work area illumination Global-standard safety features Complete coolant system Chuck status display Automatic Tool Eye 10.4" colour display EIA/ISO package LAN interface Standard tool set

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 230 mm, Y ašies eiga: 2 700 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 12 m/min, greitas poslinkis Y ašis: 12 m/min, greitasis eiga Z ašyje: 12 m/min, X ašies padavimo greitis: 12 m/min, Y ašies padavimo greitis: 12 m/min, padavimo greitis Z ašis: 12 m/min, stalo plotis: 2 400 mm, stalo ilgis: 4 000 mm, stalo apkrova: 14 000 kg, bendras svoris: 38 500 kg, veleno greitis (min.): 5 200 aps./min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Travel range X-axis: 4,230 mm Travel range Y-axis: 2,700 mm Travel range Z-axis: 700 mm Feed rate X-axis: 12 m/min Feed rate Y-axis: 12 m/min Feed rate Z-axis: 12 m/min Table length: 4,000 mm Table width: 2,400 mm Spindle speed (min.): 5,200 rpm Rapid traverse X-axis: 12 m/min Rapid traverse Y-axis: 12 m/min Laodovt S Easpfx Af Aoi Rapid traverse Z-axis: 12 m/min Distance between columns: 2,800 mm Table load capacity: 14,000 kg Spindle head position: Vertical Workpiece weight (max.): 14,000 kg Total weight: 38,500 kg Equipment: - Infinitely variable spindle speed - Chip conveyor - Internal coolant supply - Tool magazine for 40 tools - Tool holder SK 50 - Heidenhain TNC 530 control Subject to errors in the technical data. The scope of accessories is exclusively and strictly limited to the items described in the article's textual description. Any other accessories shown, e.g. for illustration purposes, are expressly not included. The machine is sold as-is without any warranty or guarantee. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Sąlyga: naudotas, Gamybos metai: 2017, Doosan Puma GT3100M, 2017 metai Gamybos metai: 2017 Valdymas: Fanuc 0i-TF Tekinimo skersmuo: [mm] 376 Tekinimo ilgis [mm] 1245 Pagrindinis velenas: Diržinis veleno pavara Maksimalus apsukų skaičius 2800 aps./min. Maksimali galia 22 kW Maksimalus sukimo momentas 1124 Nm Strypo pralaidumas 102 mm 3-žandų griebtuvas, Schunk ROTA THW plus 315-104 12 padėčių revolverinė galvutė BMT65 revolverinė galvutė Poslinkis X/Z ašyse Lodpfexggktox Af Asai 260/1350 mm