Greitaeigis radialinis grąžtas

Donau DR 40 Z

Sąlyga: geras (naudotas), DONAU DR 40 Z – Greito veiksmo radialinė gręžimo staklė su įrankiais - Gręžimo našumas / plienas apie 40 mm - 18 veleno apsisukimų skaičių 35-1800 aps./min - Gręžimo našumas / pilkoji ketaus apie 50 mm - Sriegimo našumas / plienas M33 - Sriegimo našumas / pilkoji ketaus M45 - Automatiniai padavimai 0,075-0,60 aps./min - Gręžimo veleno tvirtinimas MK 4 - Pinolės skersmuo 55 mm - Pinolės eiga 220 mm - Kolonos aukščio reguliavimas 450 mm - Mažiausias / didžiausias gręžimo spindulys 305-1005 mm - Stalo dydis 1200x600 mm - ĮVAIRŪS ĮRANKIAI ŽR. NUOTRAUKAS Matmenys: I x P x A 1,9 x 2,3 x 2,8 m / Svoris 1800 kg Podpfx Aeyfwwceh Hjpl Galimi netikslumai ar įvedimo klaidos.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Used straightening press in very good condition for sale. This universal and robust Stierli straightening press is equipped with a 5m straightening beam. It is capable of processing beams up to HEA-600 and HEB-600 (with S-235). The machine is operated with Stierli’s proven stroke fine adjustment control, making it very easy to use and enabling fast, precise straightening and bending operations. Additional options can be added upon request, such as powered roller conveyors, NC control, laser measurement, etc. Ppjdpfx Asufhzvsh Hol (Note: The photo does not show the original machine.)

Sąlyga: naudotas, Gamybos metai: 1991, veleno tvirtinimas: MK 4, Darbo stalas 600 mm x 1200 mm Konsolės eiga 600 mm Įrankio laikiklis MK 4 Podpfx Aox N Ifteh Hspl Gręžimo geba 40 mm pliene Sriegiklio įrenginys Aušinimo skysčio įranga Dokumentacija

Sąlyga: naujas, Gamybos metai: 2024, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 450 mm, - Simple graphical programming, including GoTo function in manual mode - Working lengths from 3000 to 16,500 mm, depending on configuration - Free programming in DIN/ISO (G-codes) - 2-axis interpolation for X/Y axis, including arcs Pedpfsrb Afaex Ah Hjpl - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min, Y-axis = 25 m/min Main spindle BT 40 - 5-fold bearing support, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads: drilling and milling - Maximum tool length: 290 mm - Maximum tool diameter: 88 mm X-axis guidance - 2 pieces of 45 mm linear guides, each with 2 ball-type carriages X-axis drive - Helical precision rack and pinion, travel path 3,000 to 16,500 mm Y-axis guidance - 2 pieces of 35 mm linear guides, each with 2 ball-type carriages Y-axis drive - Ball screw spindle, diameter 25 mm, travel path 600 mm Z-axis guidance - 2 pieces of 35 mm linear guides, each with 2 ball-type carriages Z-axis drive - Ball screw spindle, diameter 32 mm, travel path 450 mm Standard configuration Automatic tool changer with 10 positions, mounted in the machine column

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Technical Data: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical top roll: 70 - 185 mm Diameter of side and central lower rolls: 105 mm Conical bending device Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Podpfx Aow An Uhsh Hopl Very little used, as new condition The seller does not assume liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Sąlyga: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! Pjdpfxjf Sqckj Ah Hepl ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Podpfxou Aa I So Ah Hspl Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: geras (naudotas), Gamybos metai: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid radial drilling machine - Clamping table: 400 x 1100 mm Ppodpfx Asirax Ujh Hol - Arm reach: 930 mm - Taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm - Weight: 1500 kg

Sąlyga: naujas, Universalioji frezavimo staklė Gamintojas: OPTimill Modelis: MT 50 Prekės Nr.: 3336005 Būklė: Nauja staklė Eigos: - X ašis: 580 mm - Y ašis: 200 mm - Z ašis: 340 mm Standartiškai komplektuojama su: - 3 ašių skaitmenine indikacija DPA 31 PLUS - Automatinė X ašies pastūma - Ilgas frezos strypas 16 mm - Ilgas frezos strypas 22 mm Psdpfebnfxuex Ah Hopl - Gręžtuvo griebtuvo tvirtinimas B 18 - Dantytasis gręžtuvo griebtuvas 3–16 mm/B 18 - Redukcinis įvorė MK 2 su išstūmimo grioveliu - Redukcinis įvorė MK 3 su išstūmimo grioveliu - Mašinos šviestuvas - Aušinimo sistema - Eksploataciniai įrankiai - Naudojimo instrukcija

Sąlyga: naujas, Gamybos metai: 2024, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Art. No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned on the X-axis at the desired location, clamped, and drilled. All you have to do is press the start button. Round tubes, rectangular tubes, angle profiles, as well as flat and solid materials can be conveniently clamped pneumatically into the horizontal gripper of the positioning system. After simply entering the X-values or recalling an already programmed process, the unit operates entirely autonomously. The Y-axis can be adjusted by the operator via a manual handwheel with digital display. Advantages • Sequences of holes are carried out automatically at precise intervals. • Operative errors are drastically reduced. • Programming is completed in just a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower requirements. Fully automatic design Ppodpfxjfu Itbs Ah Hsl Measuring length: 6,000 mm Overall length: 13,500 mm NC single-axis control Pneumatic vise (clamping width 200 mm) Minimum quantity lubrication unit with holder and spray nozzle Drilling machine: Unimax 3T AV (see technical data on datasheet) Anti-rotation device Motorized height adjustment Thread-cutting unit NC Positioning System PD 200p Feed force: 200 kg Positioning possible by absolute and incremental dimensions Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile for contamination protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Insert plates / Bracing / Roller diameter 50 mm / Steel rollers Plantec Maschinen GmbH